초록
적층으로 구성되는 초소형 전자렌즈의 실리콘 렌즈와 절연체인 파이렉스는 접합과 정렬을 동시에 수행하여야 한다. 이를 위한 방법으로 회절을 이용한 정렬과 레이저 접합을 이용하였으며, source 렌즈와 Einzel 렌즈의 정렬오차는 가장 큰 개구를 기준으로 최대 $\pm$4% 이내에서 이루어졌다. 정렬 조건과 레이저 접합 조건을 제시하였으며, 접합을 견고히 하기 위한 양극 접합 방식을 기술하였다. 전류영상화를 통해 선폭이 9 $\mu$m인 Cu grid를 시험한 결과 완성된 전자렌즈는 감속모드보다 가속모드에서 분해능이 좋았으며, 작은 개구를 가진 렌즈의 정밀한 정렬과 조합으로 높은 분해능을 믿을 수 있었다.
A silicon lens and an insulator of pyrex, components of a micro-electron column, should be assembled by aligning and stacking simultaneously. An optical alignment of a diffraction beam and a laser welding were employed for the assembly of a source lens and an Einzel lens with precision within $\pm$4% for the maximum aperture size. The experimental condition for optical alignment and laser welding are explained. Anodic bonding was used to assist in stacking lenses. A micro-electron column of smaller apertures assembled with precise alignment and fabrication was tested with a current image of a Cu grid of 9$\mu$m in linewidth, and showed a higher resolution in acceleration mode.