초록
본 연구에서는 우선순위기반의 동적 프로그래밍 기법을 이용하여 제안된 기존의 직접부하제어 알고리즘과 본 연구에서 제시되는 능동 데이터베이스를 연동시킨 직접부하제어시스템을 제안하였다. 능동 데이터베이스 구축을 위해, 데이터베이스의 요구 사항을 분석하여 E-R Diagram을 이용한 개념을 도입하여 데이터베이스를 설계 후 이를 시스템으로 구현하였다. 그 후 현재 부하량 또는 15분 후의 부하량이 목적 부하량을 초과하는 경우에 사용자의 개입 없이 직접부하제어가 이루어지도록 하기 위해 기존의 직접부하제어 알고리즘을 능동 규칙으로 모델링 하여 데이터베이스에 부과하였다. 그 결과, 직접부하제어 시스템의 데이터 관리에서 빈번한 부하의 ON/OFF에 따른 이들 데이터의 갱신 등이 발생할 경우 반드시 지켜져야 되는 무결성 검증과 현재 전력량 또는 15분 후의 전력량이 갑작스럽게 증가할 경우, 이를 해결하기 위해 사용자의 개입 없는 시스템이 자동적으로 대처할 수 있도록 하였다.
The existing DLC system functionally has two defects. One is it has to be controlled by operators whenever customer's portion of loads are increased more than predefined objected load. Therefore, it may be possible for propagating uncontrolled loads if operators make a mistake. The other one is that currently used DLC algorithm is usually focused on ON/OFF load control not concerning about reliving participated customer's inconvenience. Therefore, that is a major obstacle to attract customer participating in demand response program. This paper represents direct load control system using active database. By using active database, DLC system can control customer's load effectively without intervening of operator. And by using dynamic programming based on the order of priority for DLC algorithm, it is possible to maximize participating customer's satisfaction.