한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제16권8호
  • /
  • Pages.830-839
  • /
  • 2006
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

저소음 브레이크 설계를 위한 스퀼 소음 해석기법 연구

A Study on the Analysis of Squeal Noise for Brake Design

  • 김찬중 (자동차부품연구원 에너지부품연구센터) ;
  • 이동원 (자동차부품연구원 에너지부품연구센터) ;
  • 이봉현 (자동차부품연구원 에너지부품연구센터) ;
  • 나병철 (자동차부품연구원 에너지부품연구센터) ;
  • 김현철 (자동차부품연구원 에너지부품연구센터) ;
  • 권성진 (자동차부품연구원 에너지부품연구센터)
  • 발행 : 2006.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The phenomenon of squeal noise in the disk brake system has been, and still is, a. problem for the automotive industry. Extensive research has been carried out in an attempt to understand the mechanism that causes squeal noise and In developing design procedures to reduce squeal noise to make vehicles more comfortable. In this paper, the study on the analysis of squeal noise is performed by using computer aided engineering to design the anti-squeal noise disk brake system. The first part describes the chassis dynamometer and the testing procedure, and second part explains the finite element model and the complex eigenvalue analysis. Finally, it is shown that the proposed squeal noise analysis could be useful to investigate the design parameters that affect the squeal noise characteristics.

키워드

참고문헌

  1. Dunlap, K. B., Riehle, M. A. and Longhouse, R. E., 1999, 'An Investigation Overview of Automotive Disc Brake Noise', Society of Automotive Engineers, Paper No. 1999-01-0142
  2. Shin, K. H., Joe, Y. G. and Oh, J. E., 2003, 'The Effect of Damping of a Two - degree - offreedom Model for the Disc Brake Squeal Noise' , Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 13, No. 12, pp. 903 - 910 https://doi.org/10.5050/KSNVN.2003.13.12.903
  3. Kim, J. H., Bae, B. J., Lee, S. B. and Kim; T. J., 2005, 'Squeal Noise Analysis and Reduction of Drum Brake Using Component Mode Synthesis' , Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 15, No. 1, pp. 72 - 80 https://doi.org/10.5050/KSNVN.2005.15.1.072
  4. Lim, J. H., Cho, S. J., Choi, Y. S., Choi, S. J. and Choi, G. J., 2005, 'Brake Squeal Noise Due to Run-out' , Transactions of the Korean Society of Automotive Engineers, Vol. 13, No.3, pp. 41 - 47
  5. Yeo, T. I., 2002, 'A Study on Wear Life Prediction of Disk Brake Pads' , Transactions of the Korean Society of Automotive Engineers, Vol. 10, No.4, pp. 199 - 205
  6. Kang, H. W., 2001, 'A Study on the Complex Eigenvalue Analysis of Disc Brake Squeal Noise' , Master's Thesis, Seoul National University
  7. Abdelhamid, M. K., 1995, 'Structural Instability Test/ Analysis of Brake Squeal' , Society of Automotive Engineers, Paper No. 951281
  8. Mahajan, S. K., Hu, Y. H. K. and Zhang, K., 1999, 'Vehicle Disc Brake Squeal Simulations and Experience' , Society of Automotive Engineers, Paper No. 1999-01-1738
  9. Zhang, L., Wang, A., Mayer, M. and Blaschke, P., 2003, 'Component Contribution and Eigenvalue Sensitivity Analysis for Brake Squeal' , Society of Automotive Engineers, Paper No. 2003-01-3346
  10. Kung, S. W., Dunlap, K. B. and Ballinger, R. S., 2000, 'Complex Eigenvalue Analysis for Reducing Low Frequency Brake Squeal' , Society of Automotive Engineers, Paper No. 2000-01-0444
  11. Chung, C. H. J., Steed, W., Dong, J., Kim, B. S. and Ryu, G. S., 2003, 'Virtual Design of Brake Squeal' , Society of Automotive Engineers, Paper No.2003-01-1625
  12. Park, C. K., Han, M. G., Cho, S. S., Choi, H. G., Jeong, J. D. and Lee, J. M., 2001, 'A Study on the Reduction of Disc Brake Squeal Using Complex Eigenvalue Analysis', Society of Automotive Engineers, Paper No. 2001-01-3141

피인용 문헌

  1. Squeal Test Using Lab-Scale Brake Dynamometer for Pad Angle and Negative-slope vol.14, pp.7, 2013, https://doi.org/10.5762/KAIS.2013.14.7.3158
  2. Analysis of Natural Frequencies and Squeal Noise of KTX Brake Unit vol.24, pp.12, 2014, https://doi.org/10.5050/KSNVE.2014.24.12.954