Abstract
A Micorstrip Bandpass Filter Using DBRs for WLAN ($2.3{\sim}2.4GHz$) applications is designed and an EBG structure is employed in the ground plane of the filter to suppress the stopband responses of the filter. The number of DBRs is chosen as two in consideration of low insertion loss and small size of two filter. The center frequency of the filter to be designed is 2.35GHz and its bandwidth is 140MHz. The responses of two kinds of DBR filters (one with EBG and the other without EBG) are calculated and compared with the measurements. The experimental results are in good agreement with the calculations: The bandwidth and insertion loss of the filter with EBG structure are 3.8% and 1.7dB respectively, while those of the filter without EBG structure are 7% and 1.23dB. It is shown that the insertion loss of the filter is increased and its bandwidth is deceased due to the EBG structure. Also the stopband responses of the filters with EBG structures are shown to be much improved compared with those without EBG.
2.3 GHz대 WLAN용으로 DBR(Dual-Behavior Resonator)를 사용한 협대역 대역통과여파기와 이 여파기의 고조파를 제거하기 위해 EBG(Electromagnetic Bandgap) 구조를 적용한 여파기를 설계한다. 여파기의 삽입 손실과 크기를 최소화하기 위해 2개의 DBR을 선택한다. 여파기의 중심 주파수는 2.35GHz이고, 대역폭은 140MHz 이다. 두 가지 (EBG 구조를 가지는 경우와 가지지 않는 경우) DBR 여파기의 응답특성을 계산하고, 측정결과와 비교한다. 실험결과 계산치와 매우 잘 일치한다 : EBG 구조를 가지는 여파기의 대역폭과 삽입손실은 각각 3.8%와 1.7dB이다. 그러나 EBG 구조를 가지지 않는 여파기의 대역폭과 삽입손실은 각각 7%와 1.23dB이다. 여파기의 삽입손실이 증가하고, 대역폭이 감소한 것은 EBG 구조를 적용한 결과이다. 또한 EBG 구조를 적용한 여파기의 저지대역 특성은 EBG 구조가 없는 여파기에 비해 매우 향상된다.