Abstract
The storage function model (SFM) has been used for the flood forecasting in Korea. The SFM has a simple calculation process and it is known that the model is more reasonable than linear model because it considers non-linearity of flood runoff. However, the determination of parameters is very difficult. In general, the trial and error method which is an manual calibration by the decision of a model manager. This study calibrated the parameters by the trial and error method and optimization technique. The calibrated parameters were compared with the representative parameters which are used in the Flood Control Centers in Korea. Also, the evaluation indexes on objective functions and calibration methods for the comparative analysis of simulation efficiency. As a result, the Genetic Algorithm showed the smallest variation in objective functions and, in this study, it is known that the objective function of SSR (Sum of Squared of Residual) is the best one for the flood forecasting.
현재 국내의 홍수예보시스템의 예측 모형으로 저류함수모형을 사용하고 있다. 저류함수모형은 계산절차가 간편하고 홍수유출의 비선형성을 고려할 수 있는 방법이므로 선형모형보다 합리적이라고 알려져 있다. 그러나 저류함수모형을 실제 홍수사상에 적용하는데 있어 매개변수를 결정하는 것이 매우 어렵다. 저류함수모형의 매개변수 보정을 모형 운영자의 주관적인 판단아래 시행착오에 의한 수동보정 방법을 사용하여 왔다. 본 논문에서는 홍수통제소에서 사용하고 있는 저류함수 모형의 대표(평균) 매개변수와 시행착오법(Trial & Error Method) 그리고 최적화기법(Optimization Technique)에 의해 보정된 매개변수를 비교 분석하였다. 또한 모의효율을 평가하기 위하여 목적함수별, 보정방법별로 평가지표들을 산정하고 비교 분석하였다. 분석 결과, 최적화기법의 하나인 유전자 알고리즘(Genetic Algorithm)이 목적함수에 따른 변동성이 가장 적었으며, 목적함수로는 SSR(Sum of Squared of Residual)이 가장 적합한 것으로 판단하였다.