참고문헌
- 박석균. 강선홍 (2006a). 슬러지계면층높이변화모델에서 슬러지침전특성에 대한 영향, 상하수도학회지, 20(1). pp.147-155
- 박선균, 강선홍 (2006b) 슬러지계면층높이변화모델에서 컬럼높이에 대한 영향, 상하수도학회지, 20(2). pp.265-272
- Akca, L., Kinaci, C., and Karpuzcu, M. (1993) A model for optimum design of activated sludge plants, Wat. Res., 27(9), pp.1461-1468 https://doi.org/10.1016/0043-1354(93)90026-E
- Bond, A.W. (1961) Behaviour of suspensions, Wat. Engrs., 15(7), pp. 494 - 516
- Brown, J.C., and LaMotta, E. (1971) Physical behaviour of flocculent suspensions in upflow, Sanitary Eng. Div., 97, SA2, pp. 209 - 224
- Catunda, P.F.C., Van Haandel A.C Araujo, L.S., and Vilar, A., (1989), Determinacao da sediment abilidade de lodo ativado (Determination of the settleability of activated sludge), In Congresso Brasileiro de Engenharia Sanitaria e Ambiental, 15, pp. 53 - 85
- Cho, S.H., Colin, F., Sardin, M., and Prost, C. (1993) Settling velocity model of activated sludge, Wat. Res., 27(7), pp.1237-1242 https://doi.org/10.1016/0043-1354(93)90016-B
- Daigger, G.T., and Roper, R.E., Jr., (1985), The relationship between SVI and activated sludge settling characteristics, Journal Water Pollution Control Federation, 57(8), pp. 859-866
- Daigger, G.T. (1995) Development of refine clarifier operating diagrams using an updated settling characteristics database, Wat. Env. Res. 67(21), pp. 95-100 https://doi.org/10.2175/106143095X131231
- Dick, R.I., and Young, K.W. (1972) Analysis of thickening performance of a final settling tank, Proceedings of the 27-th Purdue Industrial Waste Conference, Lafayette, Indiana, Purdue University, pp. 33-54
- Dupon, R, and Dahl, C. (1995) A one dimensional model for a secondary settling tank including density current and short circuiting, Wat. Sci. and Tech. 31(2), pp. 215 - 224
- Ekama, G.A, and Marais, G.Y.R., (1986), Sludge setteability in secondary settling tank design procedure, Wat. Poll. Con. 1, pp.101-114
- Fitch, B. (1983) Kynch theory and compression zones, A.I.Ch.E.J. 29, pp. 940-947 https://doi.org/10.1002/aic.690290611
- Font, R. (1988) Compression zone effect in batch sedimentation, A.I.Ch.E.J. 34, pp. 229-238 https://doi.org/10.1002/aic.690340207
- Froes, C. M. V. (1996) Avaliacao do desempenho da estacao de tratamento de esgotos do Conjunto Habitacional de Morro Alto, com enfase na teoria do fluxo de solidos limite (Evaluation of the performance of the Morro Alto wastewater treatment plant, with emphasis on the solids flux theory), Dissertacao de mestrado, UFMG
- Hartel, L., and Popel, H.J. (1992) A dynamic secondary clarifier model including processes of sludge thickening, Wat. Sci. Tech., 25(6), pp 267-284 https://doi.org/10.2166/wst.1992.0128
- Hultman, B., Lowen, M., Karlsson, U., Li, P.H. and Molina, L. (1991) Prediction of activated sludge sedimentation based on sludge indices, Wat. Sci. Tech., 24(7), pp. 33-42
- Jandel (1992) Automated curve fitting sofrware, User's manual, Jandel Scientific. 2591 Kernel Bldv. San Rafael, CA 94901
- Kazmi, A. A., and Furumai, H. (2000) A simple settling model for batch activated sludge process, Wat. Sci. Tech., 42(3), pp. 9-16
- Kim, M.H., Al-Ghusain, I.A., Hao, O.J., and Lim, B.S., (1994), Modeling of nitrate disappearance and sludge rising in a settling column, Wat. Res., 28(9), pp. 1861-1872 https://doi.org/10.1016/0043-1354(94)90161-9
- Koopman, B., and Cadee, K. (1983) Prediction of thickening capacity using diluted sludge volume index, Wat. Res., 17(10), pp.1427-1431 https://doi.org/10.1016/0043-1354(83)90274-9
- Marcos, V.S. and Foress, C.M.V.C. (1999) Determination of the required surface area for activated sludge final clarifiers based on a unified database, Wat. Res., 33(8), pp. 1884-1894 https://doi.org/10.1016/S0043-1354(98)00401-1
- Michaels, A.S., and Bolger, J.C, (1962) Settling rates and sedimentation volumes of flocculated kaolin suspensions, Ind. Eng. Cbem., Fundamentals, 1, pp. 24-33 https://doi.org/10.1021/i160001a004
- Mines, J., Richard, O., Vilagos Jeffrey, L., Echelberger Jr. Wayne, F., and Murphy, R. Jerry (2001) Conventional and AWT mixed-liquor settling characteristics., J. Envir. Eng., 127(3), pp. 249-258 https://doi.org/10.1061/(ASCE)0733-9372(2001)127:3(249)
- Ozinsky, A. E., and Ekama, G. A. (1995) Secondary settling tank modelling and design Part 1: review of theoretical and practical developments. Wat. SA., 21(4), pp 325-332
- Pitman, A R., (1984), Settling of nutrient removal activated sludges. Wat. Sci, and Tech., 17, pp, 493-504
- Tiller, F. M. (1981) Revision of Kynch sedimentation theory, A.I.Ch.E.J., 27(5), pp. 823-828 https://doi.org/10.1002/aic.690270517
- Vesilind, P.A. (1968) Design of prototype thickeners from batch settling tests, Water Sew. Works, 115(7), pp. 302-307
- Von Sperling M. (1990) Optimal management of the oxidation ditch process, Ph. D. thesis, Imperial College, University of London, p.371
- Wahlberg, E.J., and Keinath, T.M. (1988) Development of settling flux curves using SVI, J. Water Pollution Control Federation, 60(12), pp. 2095-2100
- Wahlberg, E.J., and Keinath, T. M. (1995) Development of settling flux curves using SVI: an addendum, Wat. Env. Res., 67(5), pp. 872-874 https://doi.org/10.2175/106143095X131817
- White, M.J.D. (1976) Design and Control of Secondary Settlement Tank, Water Pollution Control, 75, pp. 459-467