참고문헌
- M. Knoerr, 1996, Fatigue failure of cold forging tooling : causes and possible solutions through fatigue analysis, JMPT. Vol. 46, pp. 57-71
- M. J. Liou, H. S. Hasiano, 1989, Prediction of die wear in high speed hot upset forging, ERC/NSM Report, No. 99, pp. 33-39
- J. H. Kang, 1999, A study on a die wear model considering thermal softening: (I) construction of the wear model, JMPT, Vol. 96, pp. 53-58 https://doi.org/10.1016/S0924-0136(99)00103-X
- J. H. Kang, 1999, A study on a die wear model considering thermal softening: (II) Application of the suggested wear model, JMPT, Vol. 94, pp. 183-188 https://doi.org/10.1016/S0924-0136(99)00104-1
- G. D. Monika, 1999, The effect of hardening layers and technological lubricants on heat exchange between workpiece and die, Comp. and. Struc., Vol.72, pp. 165-172 https://doi.org/10.1016/S0045-7949(99)00040-1
- D. J. Jeong, B. M, Kim, 2001, Effects of surface treatments and lubricants for warm forging die life, JMPT, Vol. 113, pp.544-550 https://doi.org/10.1016/S0924-0136(01)00693-8
- 권진욱, 이영선, 2005, Al6061 열간단조시 계면열전달계수에 관한 연구, 한국소성가공학회 춘계학술대회, pp. 219-222
- H. Grass, 2003, 3-D Simulation of hot forming and microstructure evolution, Comp. Mat. Sci., Vol. 28, pp. 469-477 https://doi.org/10.1016/j.commatsci.2003.06.003
- Victor Vaquez, 2000, Die design for flashless forging of complex parts, JMPT, Vol.98, pp. 81-89 https://doi.org/10.1016/S0924-0136(99)00308-8
- Veronique Garat, 2004, Influence of design and process parameters on service life of nut hot forging die, JMPT, Vol.147, pp. 359-369 https://doi.org/10.1016/j.jmatprotec.2003.01.002
- S. Sen, B. Aksakal, 2000, Transient and residual thermal stresses in quenched cylindrical bodies, Inter. J. Mech. Sci., Vol.42, pp. 2013-2029 https://doi.org/10.1016/S0020-7403(99)00063-6
- 진민호, 강성수, 2004, 냉간단조용 SCM420 강의 퀜칭 시 열전달 예측모델 개발, 한국소성가공학회지, Vol.13, No.5. pp. 441-448
- J. U. Jang, 2002, FE Program development for predicting thermal deformation in heat treatment, JMPT, Vol.130, pp. 546-550 https://doi.org/10.1016/S0924-0136(02)00802-6