참고문헌
- Lundberg, G. and Palmgren, A. K., 1947, 'Dynamic Capacity of Rolling Bearings,' ACTA POLYTECHNICA, Mechanical Engineering Series 1, Royal Swedish Academy of Engineering Science, No.3. pp. 36-46
- Weibull, W., 1956, 'Scatter of Fatigue Life and Fatigue Strength in Aircraft Structure Materials and Parts,' Fatigue in Aircraft Structure, N. Y., Academic Press, pp. 126-145
- Yhland, E. M., 1967, 'Waviness Measurement-An Instrument for Quality Control in Rolling Bearing Industry,' Proc. IMechE, Vol. 182, Part 3K pp. 438-445
- Yhland, E. M., 1992, 'A Linear Theory of Vibrations Caused by Ball Bearings with Form Errors Operating at Moderate Speed,' ASME, J. of Tribology, Apr, Vol. 114, pp.348-359 https://doi.org/10.1115/1.2920894
- Harris, T. A., 1991, Rolling Bearing Analysis, 3rd Ed., John Wiley & Sons, INC
- ISO, 1985, 'Explanatory Note on ISO 281/1 -1977,' Technical Report 8646
- Ono, K. and Takahasi, K., 1996, 'Theoretical Analysis of Shaft Vibration Supported by a Ball Bearing with Small Sinusoidal Waviness,' IEEE Trans. on Magnetics, Vol. 32, No.3, pp. 1709-1714 https://doi.org/10.1109/20.492853
- Ono, K. and Takahasi, K.,1996, 'Theoretical Analysis of Shaft Vibration Supported by a Ball Bearing with Small Sinusoidal Waviness,' IEEE Trans. on Magnetics, Vol. 32, No.3, pp.1709-1714 https://doi.org/10.1109/20.492853
- Akturk, N., Uneeb, M. and Gohar, R., 1997, 'The Effects of Number of Balls and Preload on Vibrations Associated with Ball Bearings,' ASME, J.of Tribology, Vol. 119, pp.747-753 https://doi.org/10.1115/1.2833880
- Akturk, N., 1999, 'The Effects of Number of Balls and Preload on Vibrations Associated with Ball Bearings,' ASME, J. of Tribology, Vol. 121, pp. 667-677 https://doi.org/10.1115/1.2834121
- Jeong, S. W. and Jang, G. H., 2001, 'Analytical Theory of Ball Bearing Considering Waviness of Rolling Elements,' Transactions of the Korean Society for Noise and Vibration Engineering. Vol. 11, No.7, pp.275-286
- FAG Bearings Korea Corporation, 1999, Rolling Bearing Catalog WL 41 520/2 KA
- Lee, Y. K., Choi, S. K., Yoon, K. C. and Lee, Y. S., 2003, 'NRRO Analysis of 3.5inch HDD Spindle Ball Bearings utilizing the Measured Geometric Imperfection,' Proceedings of the KSNVE Annual Spring Conference, pp, 585-591
- Lee, Y. K., Choi, S. K., Yoon, K. C. and Lee, Y. S., 2003, 'Analysis of NRRO for Outer Ring Rotation Ball Bearings of 3.5 inch HDD Spindle Motors,' Inter-Noise, N296
- Yoon, K. C., 2000, 'Design Methods of Application-based Exclusive Ball Bearings Using Genetic Algorithms,' Ph.D. thesis, Department of Mechanical Design and Product Engineering, Hanyang University
- Lee, Y. K., 2003, 'Analysis of NRRO for Outer Ring Rotation Ball Bearings of 3.5 Inch HDD Spindle :Motor,' ME. thesis, Department of Mechanical Design Engineering, Chungnam National University
피인용 문헌
- Roller Design of IRB Seismic Isolation Device Using Test Evaluation : Part II. Heat Treatment of Material vol.23, pp.4, 2013, https://doi.org/10.5050/KSNVE.2013.23.4.332