Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지

Effects of Montmorillonite Clay on Properties of paper Coating Additives

  • Seo Yoon-Seok (Department of Advanced Materials Engineering, Chonbuk National University) ;
  • Nah Chang-Woon (Department of Advanced Materials Engineering, Chonbuk National University)
  • Published : 2006.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

A new composition of paper coating adhesives was prepared by using a nano-filler of an organically-modified montmorillonite (O-MMT). The new O-MMT coating adhesives were applied to the paper, and the properties of coated papers including surface morphology, optical and physical properties, and printing properties were investigated. The use of O-MMT improved the mechanical properties, such as folding endurance, tearing strength, and tensile strength, while the surface smoothness decreased. It decreased especially when the dosage was high enough, approximately above 6 parts. The printing properties such as wet- and dry-pick were enhanced with addition of O-MMT.

Keywords

References

  1. Lunxue Ye, Anyong Zhong, Deben Chen, Fei Yang, Preparation and Properties of Nano-Montmorillonite Paper-Plastic Laminating Adhesive, Journal of Applied Polymer Science,Vol. 97,P.872 (2005) https://doi.org/10.1002/app.20795
  2. U. Hoffmann, K. Endell and D. Wilim, Kristallstruktur and Quellung von Montmorillonite, Z. Krist., 86,340
  3. J. Mering, On the hydration of Montmorillonite, Trans. Faraday Soc.,42B,205
  4. Michael Kouris, Pulp and Paper Manufacture volume 8. Coating, Converting, and Specialty Process, p.16, TAPPI Press, Technology park /Atlanta P.O.Box 105113, Atlanta, GA 30348, U.S.A.(1995)
  5. Esa Lebtinen, Pigment Coating and Surface Sizing of Paper Book 11, Paper Making Science and Tech-nology a serious of 19 books, p. 61, TAPPI, Fapet Oy,P.O.Box 146, Fin-00171 Helsinki, Finland (2001)
  6. IFRA,IFRA Newsprint and Newsink guide, Testing methods 5.4.1 (2003)
  7. William E. Scott and James C. Abbott in collaboration with Stanley Trosset, Properties of Paper: An Introduction-second edition, p.33, TAPPI Press (1998)
  8. T. J. Pinnavaia, T. Lan, S. Wang Muh, J. Eng. Appl. Sci., 346, p.81-88 (1994)
  9. Kaarlo Niskanen, Paper Physics, Book16 p.117, Gummerus Printing, Jyvaskyla, Finland (1998)
  10. J.S. Lee,Paper Production Technology, p.325,Hansol Paper (1996)
  11. G.A. Smook, Hand book of Pulp & Paper Terminology, p.305, Angus Wilde Publications #203-628 West 13th Avene Vancouver, B.C. V521N9 (1995)