Corrosion Science and Technology

  • 제5권4호
  • /
  • Pages.149-152
  • /
  • 2006
  • /
  • 1598-6462(pISSN)
  • /
  • 2288-6524(eISSN)
한국부식방식학회 (The Corrosion Science Society of Korea)
권호 표지

Preparation and Impurity Control of the BaTiO3 Coatings by Micro Arc Oxidation Method

  • Ok, Myeong-Ryul (Materials Science and Technology Division, Korea Institute of Science and Technology) ;
  • Kim, Ji Hye (Materials Science and Technology Division, Korea Institute of Science and Technology) ;
  • Oh, Young-Joo (Materials Science and Technology Division, Korea Institute of Science and Technology) ;
  • Hong, Kyung Tae (Materials Science and Technology Division, Korea Institute of Science and Technology)
  • 발행 : 2006.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

$BaTiO_3$ coatings were prepared by micro arc oxidation (MAO) method. Only $Ba(OH)_2$ was dissolved in the electrolyte and process time was less than 30 min. Commercial purity $Ba(OH)_2$ (97%) containing $BaCO_3$ as impurity was used in preparing the electrolyte. XRD showed that the coating was composed of largely $BaTiO_3$, and in some process conditions, small quantity of impurity, $BaCO_3$, was characterized in the coating layer. The quantity of $BaCO_3$ could be controlled to negligible quantity by regulating the applied voltage and duration time of the MAO process.

키워드

참고문헌

  1. A. L. Yerokhin, X. Nie, A. Leyland, and A. Mathews, Surf Coat. Tech., 122, 73 (1999) https://doi.org/10.1016/S0257-8972(99)00441-7
  2. X. Nie, A. Leyland, A. Mathews, J. C. Jiang, and E. I. Meletis, J. Biomed. Mater. Res., 57, 612 (2001) https://doi.org/10.1002/1097-4636(20011215)57:4<612::AID-JBM1208>3.0.CO;2-H
  3. A. L. Yerokhin, A. Shatrov, V. Samsonov, P. Shashkov, A. Leyland, and A. Mathews, Surf Coat. Tech., 182, 78 (2004) https://doi.org/10.1016/S0257-8972(03)00877-6
  4. O. P. Terleeva, Y.-J. Oh, M.-R. Ok, V. V. Utkin, H.-P.Ha, and D.-H. Lee, Mater. Trans. JIM, 4, 2467 (2005)
  5. Y. H., S-H Hong, and K. Xu, Surf Coat. Tech., 168, 249 (2003) https://doi.org/10.1016/S0257-8972(03)00016-1
  6. J. Schreckenbach, F. Schlottig, and G. Marx, J. Mater.Res., 14, 1437 (1999) https://doi.org/10.1557/JMR.1999.0194
  7. S. V. Gnedenkov, P. S. Gordienko, O. A. Khrisanfova, T. M. Scorogatova, and S. L. Sinebrukhov, J. Mater. Sci., 37, 2263 (2002) https://doi.org/10.1023/A:1015317316363
  8. C-T. Wu and F.-H. Lu, Thin Solid Film, 398-399, 621 (2001) https://doi.org/10.1016/S0040-6090(01)01328-1
  9. F. Schlottig, D. Dietrich, J. Schreckenbach, and G. Marx, Fres. J. Anal. Chem., 358, 105 (1997) https://doi.org/10.1007/s002160050356
  10. G. A. Markov, V. I. Belevantsev, O. P. Terleeva, E. K. Shulepko, and A. I. Slonova, Vestn. MGTU Ser. Mashinostr, 1, 34 (1992), in Russian