참고문헌
- C. P. Rader, 'Handbook of Thermoplastic Elastomers', ed. by B. M. Walker and C. P. Rader, Von Nostrand Reinhold Co., New York, 1988
- S. K. De and A. K. Bhowmick, 'Thermoplastic Elastomers from Rubber-Plastic Blends', Horwood, New York, 1990
- S. Abdou-Sabet, R. C. Puydak, C. P. Rader, 'Dynamically Vulcanized Thermoplastic Elastomers', Rubber Chem. Technol., 69, 476 (1996) https://doi.org/10.5254/1.3538382
- P. Ghosh, B. Chattopadhray, A. K. Sen, 'Thermoplastic Elastomers from Blends of Polyethylene and Ethylene-propylene-diene Rubber: Influence of Vulcanization Technique on Phase Morphology and Vulcanizate Properties', Polymer, 35, 3958 (1994) https://doi.org/10.1016/0032-3861(94)90281-X
- Y. Kim, W.-J. Cho, C.-S. Ha, W. Kim, 'The Control of Miscibility of PP/EPDM Blends by Adding Ionomers and Applying Dynamic Vulcanization', Polym. Eng. Sci., 35, 1592 (1995) https://doi.org/10.1002/pen.760352004
- N. K. Gupta, A. K. Jain, R. Singhal, A. K. Nagpai, 'Effect of Dynamic Crosslinking on Tensile Yield Behavior of Polypropylene/Ethylene-propylene-diene Rubber Blends', J. Appl. Polym. Sci., 78, 2104 (2000) https://doi.org/10.1002/1097-4628(20001213)78:12<2104::AID-APP60>3.0.CO;2-7
- S. Akhtar, P. P. De, and S. K. De, 'Effect of Blend Ratio, Dynamic Crosslinking, and Half Black on Failure Properties and Hot Air and Acid Ageing Resistance of Thermoplastic Elastomer from Natural Rubber-High Density Polyethylene Blends', Mater. Chem. Phys., 12, 235 (1985) https://doi.org/10.1016/0254-0584(85)90095-1
- H. I. Salmah, M. Nasir, 'Thermoplastic Elastomers based on Polypropylene/Natural Rubber and Polypropylene Recycle Rubber Blends', Polym. Test., 21, 389 (2002) https://doi.org/10.1016/S0142-9418(01)00101-5
- S. George, R. Joseph, S. Thomas and K.T. Varughese, 'Blends of Isotactic Polypropylene and Nitrile Rubber: Morphology, Mechanical Properties and Compatibilization', Polymer, 36, 4405 (1995) https://doi.org/10.1016/0032-3861(95)96846-Z
- S. George, N. R. Neelakantan, K. T. Varughese, and S. Thomas, 'Dynamic Mechanical Properties of Isotactic Polypropylene/Nitrile Rubber Blends: Effect of Blend Ratio, Reactive Compatibilization and Dynamic Vulcanization' J. Polym. Sci. Part B.- Polym. Phys., 35, 2309 (1997) https://doi.org/10.1002/(SICI)1099-0488(199710)35:14<2309::AID-POLB11>3.0.CO;2-G
- S. George and S. Thomas, 'Dynamically Vulcanized Thermoplastic Elastomer Blends of Polyethylene and Nitrile Rubber', Polymer, 41, 1507 (2000) https://doi.org/10.1016/S0032-3861(99)00302-X
- D. K. Setua, C. Soman, A. K. Bhowmick, and G. N. Mathur, 'Oil Resistant Thermoplastic Elastomers of Nitrile Rubber and High Density Polyethylene Blends', Polym. Eng Sci., 42, 10 (2002) https://doi.org/10.1002/pen.10924
- X. Zhang, H. Huang and Y. Zhang, 'Dynamically Vulcanized Nitrile Rubber/Polypropylene Thermoplastic Elastomer', J. Appl. Polym. Sci. 85, 2862 (2002) https://doi.org/10.1002/app.10884
- S. Anandhan, P. P. De, S. K. De, A. K. Bhowmick, 'Thermoplastic Elastomer Blend of Nitrile Rubber and Poly(styrene-co-acrylonitrile). I. Effect of Mixing Sequence and Dynamic Vulcanization on Mechanical Properties', J. Appl. Polym. Sci. 88, 1976 (2003) https://doi.org/10.1002/app.11893
- H. Huang, J. Yang, X. Liu, Y. Zhang, 'Dynamically Vulcanized Ethylene-Propylene Diene Terpolymer/ Nylon Thermoplastic Elastomers', Eur. Polym. J. 38, 857 (2002) https://doi.org/10.1016/S0014-3057(01)00270-1
- M. Okamoto, K. Shiomi, T. Inoue, 'Structure and Mechanical Properties of Poly(butylene terephthalate)/ Rubber Blends Prepared by Dynamic Vulcanization', Polymer. 35, 4618 (1994) https://doi.org/10.1016/0032-3861(94)90812-5
- X. Yuan, Z. Peng, Y. Zhang, and Y. Zhang, 'The Properties and Structure of Peroxide-cured NBR Containing Magnesium Methacrylate', Polymers & Polymer Composites, 7(6), 431 (1999)
- D. Yin, Y. Zhang, Y. Zhang, Z. Peng, Y. Fan, K. Sun, 'Reinforcement of Peroxide Cured Styrene-Butadiene Rubber Vulcanizates by Methacrylic Acid and Magnesium Oxide', J. Appl. Polym. Sci., 85, 2677 (2002) https://doi.org/10.1002/app.10684
- X. Yuan, Z. Peng, Y. Zhang, 'In-Situ Preparation of Zinc Salts of Unsaturated Carboxylic Acids to Reinforce NBR', J. Appl. Polym. Sci., 77, 2740 (2000) https://doi.org/10.1002/1097-4628(20000919)77:12<2740::AID-APP220>3.0.CO;2-X
- Z. Peng, X. Liang, Y. Zhang, Y. Zhang, 'Reinforcement of EPDM by In-Situ Prepared Zinc Dimethacrylate', J. Appl. Polym. Sci., 84, 1339 (2002) https://doi.org/10.1002/app.10112
- N. Nagata, T. Sato, T. Fujii, Y. Saito, 'Structure and Mechanical Properties of Hydrogenated NBRI Zinc Dimethacrylate Vulcanizates', J. Appl. Polym. Sci.: Appl. Polym. Symp., 53, 103 (1994)
- A. Du, Z. Peng, Y. Zhang, Y. Zhang, 'Properties of EVM Vulcanizates Reinforced by In-Situ Prepared Sodium Methacrylate', J. Appl. Polym. Sci., 89, 2192 (2003) https://doi.org/10.1002/app.12476