Abstract
Conventional delay-insensitive (DI) data encodings usually require 2N+1 wires for transferring N-bit. To reduce complexity and power dissipation of wires in designing a large scaled chip, an encoder and a decoder circuits, where N-bit data transfer can be peformed with only N+l wires, are proposed. These circuits are based on a quasi delay-insensitive (QDI) model and designed by using current-mode multiple valued logic (CMMVL). The effectiveness of the proposed data transfer mechanism is validated by comparisons with conventional data transfer mechanisms using dual-rail and 1-of-4 encodings through simulation at the 0.25 um CMOS technology. In general, simulation results with wire lengths of 4 mm or larger show that the CMMVL scheme significantly reduces delay-power product ($D{\ast}P$) values of the dual-rail encoding with data rate of 5 MHz or more and the 1-of-4 encoding with data rate of 18 MHz or more. In addition, simulation results using the buffer-inserted dual-rail and 1-of-4 encodings for high performance with the wire length of 10 mm and 32-bit data demonstrate that the proposed CMMVL scheme reduces the D*P values of the dual-rail encoding with data rate of 4 MHz or more and 1-of-4 encoding with data rate of 25 MHz or more by up to $57.7\%\;and\;17.9\%,$ respectively.
기존의 지연 무관 (Delay-Insensitive(DI)) 데이터 인코딩 방식은 N 비트 데이터 전송에 물리적으로 2N+1 개의 도선이 필요하다. GALS(Globally Asynchronous Locally Synchronous) 시스템과 같은 대규모 칩 설계 시에 많은 도선 수로 인해 발생할 수 있는 전력 소모와 설계 복잡성을 줄이기 위해, 의사지연 무관 (Quasi D디ay-Insensitive(QDI)) 모델에 기반하고, N+1 개의 도선으로 N 비트 데이터를 전송할 수 있는 인코더와 디코더 회로를 설계한다. 이 회로들은 전류모드 다치 논리 회로(Current-Mode Multiple Valued Logic(CMMVL))를 사용하여 설계되었으며, 도선수를 줄임으로써 파생되는 효율성을 검증하기 위해 0.25 um CMOS 공정에서 기존의 DI 인코딩 방식인 dual-rail 방식 및 1-of-4 방식과 delay-power product ($D{\ast}P$) 값 측면에서 비교하였다. HSPICE를 통한 모의실험 결과 4 mm 이상의 도선의 길이에서, dual-rail 방식과는 5 MHz의 data rate 이상에서, 1-of-4 방식과는 18 MHz의 data rate 이상에서 제안된 CMML 방식이 유리하였다. 또한, 긴 도선에 버퍼를 장착한 dual-rail 방식, 1-of-4방식과의 비교에서도 개선된 CMMVL 방식이 10 mm 도선, 32 비트 데이터 전송에서 각각 4 MHz, 25 MHz data rate 이상에서 최대 $57.7\%$와 $17.9\%$의 $D{\ast}P$ 값 감소 효과를 나타냈다.