대한전자공학회논문지TC (Journal of the Institute of Electronics Engineers of Korea TC)

대한전자공학회 (The Institute of Electronics and Information Engineers)
권호 표지

Hybrid Coupler 제거와 부하 최적화를 이용한 고효율 및 고선형성 전력 증폭기의 관한 연구

Realization of High Linear and Efficiency Power Amplifier Using Optimum Load Without Hybrid Coupler

  • 안세환 (숭실대학교 정보통신공학부) ;
  • 서철헌 (숭실대학교 정보통신공학부)
  • An, Se-Hwan (School of Elctronic Engineering Soongsil Univ.) ;
  • Seo, Chul-Hun (School of Elctronic Engineering Soongsil Univ.)
  • 발행 : 2006.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문은 일반적인 Doherty amplifier보다 더 작은 부하저항을 갖도록 설계하였으며 출력 정합 회로에 PBG구조를 적용하여 IMD(Inter-modulation Distortion)를 억제 시키고 PAE (Power Added Efficiency)를 향상시켰다. 본 논문에서 제안된 전력 증폭기는 기존의 Doherty 전력 증폭기를 기준으로 IMD3는 5.5 dEC, PAE는 $5\%,$ 최대 출력 전력은 8dB back-off point 에서 $18\%$의 성능 개선을 시켰다.

In this paper, smaller load has been used compared with the conventional Doherty amplifier and PBG structure have been employed to suppress IMD (Inter-modulation Distortion) and improve PAE (Power Added Efficiency). And The PBG structure has been employed on the output macthing network of Doherty amplifier. The proposed power amplifier has been improved more the IMD3 by 5.5 dBc, and the average PAE by $5\%,$ at peak output power, $18\%$ at 8dB back-off point respectively than the conventional Doherty power amplifier.

키워드

참고문헌

  1. Steve C. Cripps 'RF Power Amplifiers for Wireless Communications', Artech House, 1999
  2. Steve C. Cripps 'Advanced Techniques in RF Power Amplifier Design', Artech House, 2002
  3. W. H. Doherty, 'A New High Efficiency Power Amplifier for Modulated Waves.' Proc. of the IRE, vol. 24, no. 9, pp. 1163-1182, 1936 https://doi.org/10.1109/JRPROC.1936.228468
  4. Upton, David M., Maloney. Peter R and et al, 'A Microwave Doherty Amplifier,' Applied Microwaves and RF, Winter 1994
  5. F.H.Raab, 'Efficiency of Doherty RF power amplifier systems.' IEEE transactions on Broadcasting, vol. BC-33, no. 3, September 1987 https://doi.org/10.1109/TBC.1987.266625
  6. 정형태, 김성욱, 장익수, '발룬을 이용한 푸쉬풀 구조의 도허티 증폭기 설계' 대한전자공학회 논문지 제41권 TC, 제4호, pp. 247-253, 2004년 4월
  7. V. Radisic, Y. Qian, R. Coccioliand and T. Itoh, 'Novel 2-D Photonic Bandgap Structure for Microstrip Lines,' IEEE Microwave Guided Wave Lett., vol. 8, no. 2, pp.69-71, 1998 https://doi.org/10.1109/75.658644
  8. I. Rumsey, P. M. Melinda and P. K Kelly, 'Photonic Bandgap Structures Used as Filters in Microstrip Circuits,' IEEE Microwave Guided Wave Lett., vol. 8, pp.336-338, 1998 https://doi.org/10.1109/75.735413
  9. V. Radisic, Y. Qian and T. Itoh, 'Broadband power amplifier using dielectric photonic bandgap structure,' IEEE Microwave Guided Wave Lett., vol. 8, pp. 13-14, 1998 https://doi.org/10.1109/75.650973
  10. Taesun Kim, and Chulhun Sea, 'A Novel Photonic Bandgap Structure for Lowpass Filter of Wide Stopband,' IEEE Microwave Guided wave Lett., January, 2000 https://doi.org/10.1109/75.842072
  11. M. ,P. Kesler, J. G. Maloney, and B. L. Shirley, 'Antenna design with the use of photonic bandgap materials as all dielectric planar reflectors,' Microwave Opt. Tech. Lett., vol.11, nl.4, pp.169-174, 1996 https://doi.org/10.1002/(SICI)1098-2760(199603)11:4<169::AID-MOP1>3.0.CO;2-I