Unsteady Lift and Drag Forces Acting on the Elliptic Cylinder

  • Kim Moon-Sang (School of Aerospace and Mechanical Engineering, Hankuk Aviation University) ;
  • Park Young-Bin (Graduate Student, Department of Aerospace Engineering, Hankuk Aviation University)
  • Published : 2006.01.01

Abstract

A parametric study has been accomplished to figure out the effects of elliptic cylinder thickness, angle of attack, and Reynolds number on the unsteady lift and drag forces exerted on the elliptic cylinder. A two-dimensional incompressible Navier-Stokes flow solver is developed based on the SIMPLER method in the body-intrinsic coordinates system to analyze the unsteady viscous flow over elliptic cylinder. Thickness-to-chord ratios of 0.2, 0.4, and 0.6 elliptic cylinders are simulated at different Reynolds numbers of 400 and 600, and angles of attack of $10^{\circ},\;20^{\circ},\;and\;30^{\circ}$. Through this study, it is observed that the elliptic cylinder thickness, angle of attack, and Reynolds number are very important parameters to decide the lift and drag forces. All these parameters also affect significantly the frequencies of the unsteady force oscillations.

Keywords

References

  1. Badr, H. M., Dennis, S. C. R. and Kocabiyik, S., 2001, 'Numerical Simulation of the Unsteady Flow Over an Elliptic Cylinder at Different Orientations,' International Journal for Numerical Methods in Fluids, Vol. 37, pp.905-931 https://doi.org/10.1002/fld.196
  2. Blackburn, H. M. and Henderson, R. D., 1999, 'A Study of Two-Dimensional Flow Past an Oscillating Cylinder,' Journal of Fluid Mechanics, Vol. 385, pp. 255-286 https://doi.org/10.1017/S0022112099004309
  3. Chou, M. H. and Huang, W., 1996, 'Numerical Study of High-Reynolds-Number Flow Past a Bluff Object,' International Journal for Numerical Methods in Fluids, Vol. 23, pp. 711-732 https://doi.org/10.1002/(SICI)1097-0363(19961015)23:7<711::AID-FLD445>3.0.CO;2-P
  4. Jordan, S. K. and Fromm, J. E., 1972, 'Osicllatory Drag, Lift and Torque on a Circular Cylinder in a Uniform Flow,' Physics of Fluids, Vol. 15, No.3, pp. 371-376 https://doi.org/10.1063/1.1693918
  5. Karman, T., 1912, 'Uber den Mechanismus des Widerstandes den ein bewegter Korper in einer Flussigkeit Erfahrt,' Nachr. Ges. Wiss. Gottingen. Math-Phys Klasse, Vol. 12, pp. 509-517
  6. Kim, M. S. and Sengupta, A., 2005, 'Unsteady Viscous Flow over Elliptic Cylinders At Various Thickness with Different Reynolds Numbers,' Journal of Mechanical Science and Technology, Vol. 19, No.3, pp. 877-886 https://doi.org/10.1007/BF02916136
  7. Lim, C. K., 1991, 'Numerical Simulation of Non-lifting Flow Over Two-Dimensional Elliptic Cylinders,' MS Thesis, Iowa State University
  8. Linnick, M. N. and Fasel, H. F., 2003, 'A High-Order Immersed Boundary Method for Unsteady Incompressible Flow Calculations,' AIAA Paper 2003-1124
  9. Manzari, M. T., 2003, 'A Time-accurate Finite Element Algorithm for Incompressible Flow Problems,' International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 13, No.2, pp.158-177 https://doi.org/10.1108/09615530310459324
  10. Mittal, R. and Balachandar, S., 1996, 'Direct Numerical Simulation of Flow Past Elliptic Cylinders,' Journal of Computational Physics, Vol. 124, pp. 351-367 https://doi.org/10.1006/jcph.1996.0065
  11. Nair, M. T. and Sengupta, T. K., 1996, 'Onset of Asymmetry : Flow Past Circular and Elliptic Cylinders,' International Journal for Numerical Methods in Fluids, Vol. 23, pp. 1327-1345 https://doi.org/10.1002/(SICI)1097-0363(19961230)23:12<1327::AID-FLD476>3.0.CO2-Q
  12. Ota, T., Nishiyama, H. and Taoka, Y., 1987, 'Flow Around an Elliptic Cylinder in the Critical Reynolds Number Regime,' Journal of Fluids Engineering, Vol. 109, pp. 149-155 https://doi.org/10.1115/1.3242635
  13. Patel, V. A., 1981, 'Flow Around the Impulsively Started Elliptic Cylinder at Various Angles of Attack,' Computers and Fluids, Vol. 9, No.4, pp.435-462 https://doi.org/10.1016/0045-7930(81)90014-1
  14. Williamson, C. H. K., 1996, 'Vortex Dynamics in the Cylinder Wake,' Annual Review of Fluid Mechanics, Vol. 28, pp.477-539 https://doi.org/10.1146/annurev.fl.28.010196.002401