Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Optimal Design for CLIP Rubber Product Made of EPDM Using Flow Analysis

EPDM재질 CLIP고무제품의 유동해석을 이용한 최적 설계에 관한 연구

  • 허영민 (부산대학교 정밀기계공학과 대학원) ;
  • 이광오 (부산대학교 정밀기계공학과 대학원) ;
  • 강성수 (부산대학교 정밀정형 및 금형가공연구센터)
  • Published : 2006.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Many rubber products are used in industrial products such as various hoses, rubber belts and oil seals etc. Especially, more then 200 rubber parts are used in the automobile, but design technology of these is largely dependent on Held experiences. These methods brought about too much time and cost in the developing procedures. However, with the help of recent rapid development of non-liner computer analysis, we can develop new sound products at low cost. Therefore in this study, optimizations of design variables such as location and number of gate in order to develop CLIP rubber product made of EPDM were performed by CAE in which Cross-WLF equations are adopted. The validity of proposed variables is evaluated by comparison with real forming results.

Keywords

References

  1. Harry, D. H. and Parrot, R. G., 'Numerical simulation of Injection Mold Filling,' Polymer Engineering and Science, Vol. 10, No.4, pp. 209-214, 1970 https://doi.org/10.1002/pen.760100404
  2. Gao, F., Patterson, W.I. and Kamal, M.R., 'Cavity Pressure Dynamics and Self-Tuning Control For Filling and Packing Phases of Thermoplastics Injection Molding,' Polymer Engineering and Science, Vol. 36, No. 9 pp. 1272-1285, 1996 https://doi.org/10.1002/pen.10521
  3. Swan, P. L., Garcia-Rejon, A., Cielo, P. and Kamal, M. R., 'Optical On-Line Measurement of the Thickness Distribution of Blow Molding Parisons,' Polymer Engineering and Science, Vol. 36, No. 7, pp. 985-992, 1996 https://doi.org/10.1002/pen.10486
  4. Sherbelis, G., Morikawa, J. and Kurihara, T., 'Thermal diffusivity of thermosetting materials by temperature-wave analysis Source,' Thermochimica acta. Vol. 299, No.2, pp. 95-100, 1997 https://doi.org/10.1016/S0040-6031(97)00141-X
  5. Lee, Y. B. and Kwon, T. H., 'Modeling and nurnerical simulation of residual stresses and birefringence in injection molded center-gated disks,' Journal of Materials Processing Technology, Vol. 111, Issues. 1-3, 25, pp. 214-218, 2001 https://doi.org/10.1016/S0924-0136(01)00524-6
  6. Hieber, C. A. and Shen, S. F., 'A finite - element / finite- difference simulation of the injection-molding filling process,' Journal of Non-Newtonian Fluid Mechanics, Vol. 7, Issue. 1 pp.1-32, 1980 https://doi.org/10.1016/0377-0257(94)01286-Q
  7. Zu, Y. S. and Lin, S. T., 'Optimizing the mechanical properties of injection molded W-4.9%Ni-2.1%Fe in debinding,' Journal of Materials Processing Technology, Vol. 71, Issue. 2, pp. 337-342, 1997 https://doi.org/10.1016/S0924-0136(97)00095-2
  8. Ballman, R. L., shusman, T. and Toor, H. L., 'Injection Molding Flow of a Molten Polymer into a Cold Cavity,' Industrial and Engineering chemistry, Vol, 51, pp. 847-850, 1959 https://doi.org/10.1021/ie50595a035
  9. Ghosh, P. and Chakrabarti, A., 'Effect of Incorporation of Conducting Carbon Black as Filler on melt rheology and relaxation behaviour of ethylene-propylene-diene monomer(EPDM),' European Polymer Journal, Vol. 36, pp.607-617, 2000 https://doi.org/10.1016/S0014-3057(99)00081-6
  10. Ginic-Markovic, M., Dutta, N. T., Dimopoulos, M., Roy Choudhury, N. and Matisons, J.G., 'Viscoelastic behaviour of filled and unfilled, EPDM elastomer,' Thermochimica acta, Vol. 357, pp.211-216, 2000 https://doi.org/10.1016/S0040-6031(00)00390-7
  11. Sopade, P. A., Halley, P., Bhandari, B., D'Arcy, B., Doebler, C. and Caffin, N., 'Application of the Williams-Landel-Ferry model to the viscosity temperature relationship of Australian honeys,' Journal of Food Engineering, In Press, Uncorrected Proof, Available online 14 May 2002 https://doi.org/10.1016/S0260-8774(02)00149-8
  12. Ferry, J. D., 'Viscoelastic properties of polymer,' John Wiley&Sons. Inc., pp. 280-290, 1980