SENSITIVITY ANALYSIS OF SUV PARAMETERS ON ROLLOVER PROPENSITY

  • Jang, B.C. (Dept. of Mechanical Engineering, Andong National University) ;
  • Marimuthu, R.P. (Dept. of Mechanical Engineering, Andong National University)
  • 발행 : 2006.10.01

초록

The growing concern surrounding rollover incidences and consequences of Sports Utility Vehicles(SUV) have prompted to investigate the sensitivity of critical vehicle parameters on rollover. In this paper, dynamic rollover simulation of Sports Utility Vehicles is carried out using a validated nonlinear vehicle model in Matlab/Simulink. A standard model is considered and critical vehicle parameters like CG height, track width and wheel base are varied within chosen specified limits to study its influence on roll behavior during a Fishhook steering maneuver. A roll stability criterion based on Two Wheel Lift Off(TWLO) phenomenon is adopted for rollover propensity prediction. Further dynamic rollover characteristics of the vehicle are correlated with Static Stability Factor(SSF), Roll Stability Factor(RSF) and Two Wheel Lift Off Velocity(TWLV). These findings will be of immense help to SUV chassis designers to determine safety limits of critical vehicle parameters and minimize rollover incidences.

키워드

참고문헌

  1. Alloum, A. (1997). Vehicle modeling aspects for an embedded real time application. Vehicle System Dynamics, 27, 187-219 https://doi.org/10.1080/00423119708969328
  2. Brewer, H. K. (2001). Overview of SUV's and Safety. CIREN. NHTSA
  3. Chan, K., Challener, S. and Lock, G (2000). Stability Characteristics of Three and Four Wheeled Vehicles. Frazer Nash Consultancy Ltd. 5352/1970 8R, Issue 1
  4. Deutermann and Wiliam. (2002). Characteristics of Fatal Rollover Crashes. NCSA. NHTSA-DOT HS 809 438
  5. Forkenbrock, G J. and Garrott, W. R. (2002). A CompreHensive Experimental Evaluation of Test Maneuvers That May Induce On-road, Untripped, Light Vehicle Rollover-Phase IV of NHTSA's Light Vehicle Rollover Research Program. NHTSA, DOT HS 809 513
  6. Garrott, W. R., Rhea, B., and Subramaniam, R. (2001). The Rollover Propensity of Fifteen-Passenger Vans. NHTSA
  7. Gillespie, T. D. (1992). Fundamentals of vehicle dynamics. SAE, Warrendale, PA 15096-0001
  8. Heydinger, G J. (1999). Measured vehicle inertia parameters-NHTSA's data through November 1998. SAE Paper No. 1999-01-1336
  9. Kim, M. H., Oh, I. H., Lee, I. H. and Jeon, M. C. (2006). Development of rollover criteria based on simple physical model of rollover event. Int. J. Automotive Technology 7, 1, 51-59
  10. Kim, H.-J. and Lee, C-R. (2002). Hybrid roll control using electric arch system considering limited bandwidth if actuating module. Int. J. Automotive Technology 3, 3, 123-128
  11. Kim, Y., Kim, G, and Lim. I. (2005). Sensitivity analysis of commercial vehicle parameters on dynamic rollover. Proc. 13th IPC on Automotive Engineering, Korean Society of Automotive Engineers, Korea
  12. Segel, L. (1956-1957). Theoretical prediction and experimental substantiation of the response of the automobile to steering control. Proc. Automobile Division of the I. Mech. E., 7,310-330
  13. Whitehead, R., Travis, W., Bevly, D. M. and Flowers, G. (2004). A study of the effect of various vehicle properties on rollover propensity. SAE Paper No. 200401-2094