Transactions on Electrical and Electronic Materials

  • 제7권6호
  • /
  • Pages.283-292
  • /
  • 2006
  • /
  • 1229-7607(pISSN)
  • /
  • 2092-7592(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

Synthesis and Properties of High Voltage Silicone Rubber by Platinum-based Flame Retardant

  • Jung, Se-Young (Department of Polymer Science and Engineering, Pusan National University) ;
  • Kim, Byung-Kyu (Department of Polymer Science and Engineering, Pusan National University)
  • 발행 : 2006.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

So that high-strength and electrical properties apply by excellent high voltage insulator electricity material, ATH content and platinum-based flame retardant that influence in flame retardant and tracking characteristic among composite of silicone rubber studied mechanical strength and influence getting to electrical properties. Composition of ${\alpha}$, ${\omega}-vinyl$ poly (dimethyl-methylphenyl) siloxane(VPMPS) of a polymer quantity made doing mole of D4, $D3^{Me,Ph}$ and VMS by 1000:15:0.2 mole ratio and uses basic catalyst tetramethylammonium silanolate(TMAS) and do opening equilibrium polymerization to be used to main polymer for high voltage insulation insulator. Control ATH content and content of platinum-based flame retardant and made high voltage insulation silicone rubber. Measured mechanical strength of making silicone rubber using UTM, and tracking characteristic according to standard of IEC 60587, flame retardant test studied effect that flame retardant characteristic gets in tracking characteristic, measuring according to UL94V method of test.

키워드

참고문헌

  1. J. M. Zeigler and F. W. Gordon Fearon, 'SiliconeBased Polymer Science A Comprehensive Resource', American Chemical Society, Washington, p. 47, 1990
  2. M. F. Lewis, 'The science and technology of silicone rubber', Rubber Chemistry and Technology, Vol. XXXV, p. 5, 1962
  3. J. E. McGrath, J. S. Riffle, L. Yilger, and A. K. Banthia, ACS. Symp. Ser., No. 211, Chap. 2, 1983
  4. ASTM D 149, 'Standard Test Methods for Dielectric breakdown Voltage and Dielectric Strength of Solide Electrical Insulating Materials at Commerical Power Frequencies', 1987
  5. ASTM Stardard D 149, Section 9, Vol. 09, p. 17, 1989
  6. W. Reddish, 'The dielectric properties of polyethylene terephthalate', Trans. Faraday. Soc., Vol. 46, p. 495, 1950
  7. A. Toureile and J. P. Reboul, 'High-field conduction phenomena in polymers', Ann. Soc. Sci., Bruxelles, Vol. 89, p. 190, 1975
  8. K. S. Cole and R. H. Cole, 'Dispersion and absorption in dielectrics', J. Chem. Phys., Vol. 9, p. 341, 1941 https://doi.org/10.1063/1.1750906
  9. T. Umemura. T. Kashiwaxaki, and T. Suzuki, 'Impurity effect on dielectric properties of polypropylene', Jpn. J. Appl. Phys., Vol. 194, p. 769, 1980
  10. P. Paul and C. N. Reddy, 'Braekdown characteristics of solid dielectrics immersed in high pressure gaseous media and subjected to direct voltage with ripple', IEEE Trans. on Electrical Insulation, Vol. EI-15, p. 43, 1980 https://doi.org/10.1109/TEI.1980.298295
  11. Callens, 'Debye relacation equations for a standard linear solid with high relaxation strength', J. Mat. Sch., Vol. 12, p. 251, 1977 https://doi.org/10.1007/BF00566265
  12. UL Standard 94, 'Test for Flammability of Plastic Materials for Parts in Devices and Appliances', 4'nd edition, 1984
  13. IEC 60587, 'Test Methods for Evaluating Resistance to Tracking and Erosion of Electrical Insulating Materials used Severe Ambient Condotions', 1984
  14. IEC 61302, 'Electrical Insulating Materials-Method to Evaluate the Resistance to Tracking and Erosion-Rotating Wheel Dip Test', 1995

피인용 문헌

  1. Flame-retardant effect and mechanism of melamine phosphate on silicone thermoplastic elastomer vol.8, pp.9, 2018, https://doi.org/10.1039/C7RA12865G