Preparation of PAC for Water Treatment Chemicals Using Waste Aluminum Dross

알루미늄 폐드로스로부터 수처리응집제용 염화알루미늄 제조

  • Published : 2006.10.27

Abstract

Waste aluminum dross was leached with hydrochloric acid to prepare PAC, poly aluminium chloride, used as water treatment chemicals. Metallic aluminum remained in the waste aluminum dross was dissolved into the hydrochloric acid solution. The solution could be used as PAC after adjusting the required alumina concentration and the basicity. Comparing to the conventional method far preparation of PAC using aluminum hydroxide, material cost could be saved in this method. Also, there is an additional merit in view of recycling of the waste aluminum dross by reducing the amount of waste dross to be landfilled.

국내 알루미늄 재생업체에서 알루미늄 용해시 발생되는 알루미늄 폐드로스를 사용하여 수처리응집제로 사용되는 폴리염화알루미늄(PAC: Poly Aluminium Chloride)를 제조하였다. 알루미늄 폐드로스를 염산과 반응시켜 폐드로스 중에 잔류하는 금속알루미늄을 PAC용액으로 제조함으로써 수산화알루미늄과 염산을 원료로 사용하여 PAC를 제조하는 종래의 방법에 비해 제품의 원료비를 줄일 수 있고, 알루미늄 폐드로스를 재활용함으로써 매립 등으로 폐기시켜야 할 폐드로스의 양을 줄이는 효과가 있다.

Keywords

References

  1. 박형규, 이후인, 김준수, 2003: '알루미늄드로스를 재활용한 캐스타블내화물 제조', 한국자원리싸이클링학회지, 12(3), pp.46-53
  2. 박형규, 이후언, 김준수, 2001: '알루미늄드로스로부터 수산화알루미늄 제조', 한국자원리싸이클링학회지, 10(5), pp.8-15
  3. 김기석, 박제현, 박재구, 2005: '알루미늄 폐드로스를 활용한 세라믹 다공체의 제조', 한국자원리싸이클링학회지, 14(2), pp.19-27
  4. 한국산업규격 KS M1510, 2002: 한국표준협회