DOI QR코드

DOI QR Code

Development of QCM dew point sensor and its sensing characteristics study

수정미소저울 노점센서 제작 및 반응특성 연구

  • Kwon, Su-Yong (Temperature-Optics Metrology Group, Division of Physical Metrology, Korea Research Institute of Standards and Science) ;
  • Kim, Jong-Chul (Temperature-Optics Metrology Group, Division of Physical Metrology, Korea Research Institute of Standards and Science) ;
  • Choi, Byung-Il (Temperature-Optics Metrology Group, Division of Physical Metrology, Korea Research Institute of Standards and Science)
  • 권수용 (한국표준과학연구원 기반표준부 온도/광도그룹) ;
  • 김종철 (한국표준과학연구원 기반표준부 온도/광도그룹) ;
  • 최병일 (한국표준과학연구원 기반표준부 온도/광도그룹)
  • Published : 2006.07.30

Abstract

This paper represents development of quartz crystal microbalance (QCM) and usage as a dew point sensor. The temperature of a quartz resonator was controlled precisely from $20^{\circ}C$ to $-30^{\circ}C$ with the ramping rate of $0.1^{\circ}C/s$ by using a custom-made crystal holder housing the quartz resonator associated with a thermoelectric cooler (Peltier cooler), which results in the working range from $15.2^{\circ}C$ to $-24.0^{\circ}C$ based on an accurate holder temperature compensation and temperature effect compensation process. The developed QCM dew point sensor and analysis techniques show very good sensing characteristics at measurement of moist air with the relative humidity from 10 %R.H. to 90 %R.H. generated by a divided-type humidity generator and the dew point temperatures were determined with an accuracy of less than ${\pm}0.18^{\circ}C$, which also showed good agreement with reference values in their error range.

Keywords

References

  1. Y. Sakai, M. Matsuguchi, and T. Hurukawa, 'Humidity sensor using cross-linked poly(chloromethyl styrene)', Sens. Actuators B, vol. 66, pp. 135-138, 2000 https://doi.org/10.1016/S0925-4005(00)00313-0
  2. R. Anchisini, G. Faglia, M. C. Gallazzi, G. Sberveglier, and G. Zerbi, 'Polyphosphazene membrane as a very sensitive resistive and capacitive humidity sensor', Sens. Actuators B, vol. 35-36, pp. 99-102, 1996
  3. T. E. Brook, M. N. Taib, and R. Narayanaswarny, 'Extending the range of a fibre-optic relativehumidity sensor', Sens. Actuators B, vol. 38-39, pp. 272-276, 1997
  4. S. P. Lee and K. J. Park, 'Humidity sensitive field effect transistors', Sens. Actuators B, vol. 35, pp. 80-84, 1996 https://doi.org/10.1016/S0925-4005(96)02018-7
  5. K. A. Vetelino, P. R. Story, R. D. Mileham, and D. W. Galipeau, 'Improved dew point measurements based on a SAW sensor', Sens. Actuators B, vol. 35, pp. 91-98, 1996 https://doi.org/10.1016/S0925-4005(96)02020-5
  6. M. Neshkiva, R. Petrova, and V. Petrov, 'Piezoelelctric quartz crystal humidity sensor using chemically modified nitrated polystyrene as water sorbing coating', Anal. Chim. Acta, vol. 332, pp. 93-103, 1996 https://doi.org/10.1016/0003-2670(96)00119-5
  7. F. P. Delannoy, B. Sorli, and A. Boyer, 'Quartz crystal microbalance (QCM) used as humidity sensor', Sens. Actuators B, vol. 84, pp. 285-291, 2000 https://doi.org/10.1016/S0924-4247(00)00391-5
  8. L. X. Sun and T. Okada, 'Simultaneous determination of the concentration of methanol and relative humidity based on a sing Nafion(Ag)-coated quartz crystal micbrobalance', Anal. Chim. Acta, vol. 421, pp. 83-92, 2000 https://doi.org/10.1016/S0003-2670(00)01030-8
  9. S. Mintova and T. Bein, 'Nanosized zeolite films for vapor-sensing applications', Micropor. Mesopor. Mater., vol. 50, pp. 159-166, 2001 https://doi.org/10.1016/S1387-1811(01)00443-7
  10. R. G. Wylie, D. K. Davies, and W. A. Caw, 'The basic process of the dew point hygrometer' Humidity and Moisture, vol. 1, Reinhold, New York, 1965
  11. C. Lu and A. W. Czanderna, 'Applications ofpiezoelectric quartz crystal rnicrobalances', Elsevier, pp. 24, 1984
  12. A. Rahtu and M. Ritala, 'Compensation of temperature effects in quartz crystal microbalance measurements', Appl. Phys. Lett., vol. 80, pp. 521-523, 2002 https://doi.org/10.1063/1.1433904
  13. V. M. Mecea, J. O. Carlsson, P. Heszler, and M. Bartan, 'Development and testing of a high temperature quartz crystal microbalance', Vacuum, vol. 46, pp. 691-694, 1995 https://doi.org/10.1016/0042-207X(94)00147-2
  14. L. Niinisto, M. Ritala, and M. Leskela, 'Synthesis of oxide thin films and overlayers by atomic layer epitaxy for advanced applications', Mater. Sci. Eng. B, vol. 41, pp. 23-29, 1996 https://doi.org/10.1016/S0921-5107(96)01617-0