Steel and Composite Structures

  • 제5권4호
  • /
  • Pages.259-269
  • /
  • 2005
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Interface friction in the service load assessment of slab-on-girder bridge beams

  • Seracino, R. (School of Civil and Environmental Engineering, University of Adelaide) ;
  • Kerby-Eaton, S.E. (School of Civil and Environmental Engineering, University of Adelaide) ;
  • Oehlers, D.J. (School of Civil and Environmental Engineering, University of Adelaide)
  • 투고 : 2003.02.12
  • 심사 : 2005.02.18
  • 발행 : 2005.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

Many slab-on-girder bridges around the world are being assessed because they are approaching the end of their anticipated design lives or codes are permitting higher allowable loads. Current analytical techniques assume that the concrete and steel components act independently, typically requiring full-scale load testing to more accurately predict the remaining strength or endurance of the structure. However, many of the load tests carried out on these types of bridges would be unnecessary if the degree of interaction resulting from friction at the steel-concrete interface could be adequately modeled. Experimental testing confirmed that interface friction has a negligible effect on the flexural capacity of a slab-on-girder beam however, it also showed that interface friction is significant under serviceability loading. This has led to the development of an improved analytical technique which is presented in this paper and referred to as the slab-on-girder mixed analysis service load assessment approach.

키워드

참고문헌

  1. Bakht, B. and Jaeger, L.G. (1992),"Ultimate load test of slab-on-girder bridge", J. Struct. Eng., 118(6), 1608-1624. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1608)
  2. Bakht, B. and Jaeger, L.G. (1990),"Bridge testing ? A surprise every time", J. Struct. Eng., 116(5), 1370-1383. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1370)
  3. Burdette, E.G. and Goodpasture, D.W. (1988),"Correlation of bridge load capacity estimates with test data", National Cooperative Highway Research Report 306, Transportation Research Board, National Research Council, Washington, D.C.
  4. Burdette, E.G. and Goodpasture, D.W. (1971),"Final report on full-scale bridge testing: An evaluation of bridge design criteria", Office of Research and Planning Tennessee Highway Department and The Department of Transportation Federal Highway Administration.
  5. Moses, F., Schilling, C.G. and Surya, K.R. (1989),"Reliability-based bridge life assessment", Structural Safety and Reliability: Proc. of ICOSSAR'89, the 5th Int. Conf. of Structural Safety and Reliability, New York.
  6. Newmark, N.M., Siess, C.P. and Viest, I.M. (1951),"Tests and analysis of composite beams with incomplete interaction", Proc. of the Society for Experimental Stress Analysis, 9(1), 75-92.
  7. Nowak, A.S. and Tharmabala, T. (1998),"Bridge reliability evaluation using load tests", J. Struct. Eng., 114(10), 2268-2279.
  8. Oehlers, D.J. and Bradford, M.A. (1995), Composite Steel and Concrete Structural Members: Fundamental Behaviour. Pergamon Press, Elsevier Science Ltd., Oxford.
  9. Oehlers, D.J., Seracino, R. and Yeo, M.F. (2000),"Effect of friction on shear connection in composite bridge beams", J. Bridge Eng., 5(2), 91-98. https://doi.org/10.1061/(ASCE)1084-0702(2000)5:2(91)
  10. Oehlers, D.J. and Sved, G. (1995),"Composite beams with limited-slip-capacity shear connectors", J. Struct. Eng., 121(6), 932-938. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:6(932)
  11. Roberts, W.S., Lake, N.J. and Heywood, R.J. (1997),"Investigation of the load capacity and degree of composite action of Salt Creek Bridge", Infratech Systems & Services Report No. 97926a, South Australia.
  12. Seracino, R. and Hocking, P. (2001),"The effect of interface friction on slab-on-girder beams", 17th Australasian Conf. on the Mechanics of Structures and Materials, Gold Coast, June.
  13. Seracino, R., Oehlers, D.J. and Yeo, M.F. (2002),"Partial-interaction fatigue assessment of stud shear connectors in composite bridge beams", Structural Engineering and Mechanics, 13(4), 455-464. https://doi.org/10.12989/sem.2002.13.4.455
  14. Seracino, R., Oehlers, D.J. and Yeo, M.F. (2001)," Partial-interaction flexural stresses in composite steel and concrete bridge beams", Eng. Struct., 23, 1186-1193. https://doi.org/10.1016/S0141-0296(00)00121-8
  15. Singleton, W.M. (1985),"The transfer of shear in simply supported composite beams subject to fatigue loading", MSc Thesis, National University of Ireland, Department of Civil Engineering, University College, Cork.
  16. Stallings, J.M. and Yoo, C.H. (1993),"Tests and ratings of short-span steel bridges", J. Struct. Eng., 119(7), 2150-2168. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:7(2150)
  17. Standards Australia (1994), AS3600, Australian Standard for Concrete Structures. Standards Association of Australia, Sydney.