Steel and Composite Structures

  • 제5권6호
  • /
  • Pages.485-513
  • /
  • 2005
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Behaviour of steel joints under fire loading

  • 투고 : 2004.11.11
  • 심사 : 2005.05.25
  • 발행 : 2005.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a state-of-the-art on the behaviour of steel joints under fire loading and some recent developments in this field, currently being carried out by the authors. Firstly, a review of the experimental research work on steel joints is presented, subdivided into isolated member tests, sub-structure tests and tests on complete building structures. Special emphasis is placed on the seventh Cardington test, carried out by the authors within a collaborative research project led by the Czech Technical University in Prague. Secondly, a brief review of various temperature distributions within a joint is presented, followed by a discussion of the behaviour of isolated joints at elevated temperature, focussing on failure modes and analytical procedures for predicting the moment-rotation behaviour of joints at elevated temperature. Finally, a description of the coupled behaviour of joints as part of complete structures is presented, describing previous work and investigations on real fire (including heating and cooling phases) currently being carried out by the authors.

키워드

참고문헌

  1. Al-Jabri, K.S., Lennon, T., Burgess, I.W. and Plank, R.J. (1998),"Behaviour of steel and composite beamcolumn connections in fire", J. Constructional Steel Research, 46(1-3), paper no 180.
  2. Al-Jabri, K.S. (1999),"The behaviour of steel and composite beam-to-column connections in fire", Doctoral Thesis, University of Sheffield, UK.
  3. Al-Jabri, K.S. (2003),"Numerical modeling of the behaviour of bare-steel and composite flexible end-plate connections at elevated temperature", Proc. Conf. Advances in Structures, 635-641, Australia.
  4. Al-Jabri, K.S., Burgess, I.W. and Plank, R.J. (2004),"Prediction of the degradation of connections characteristics at high temperature". J. Constructional Steel Research, 60, 771-781. https://doi.org/10.1016/S0143-974X(03)00142-1
  5. Al-Jabri, K.S. (2004),"Component-based model of the behaviour of flexible end-plate connections at elevated temperature", Composite Structures, 66, 215-221. https://doi.org/10.1016/j.compstruct.2004.04.040
  6. Allam, A.M., Fahad, M.K., Liu, T.C.H., Burgess, I.W., Plank, R.J. and Davies, J.M. (1999),"Effects of restraint on the behaviour of steel frames in fire", in Studnicka J, Wald F. and Machacek J. (eds.), Proc. Conf. Eurosteel'99, Praha, Czech Republic, pp. 279-282.
  7. Anderson, D. and Najafi, A.A. (1994),"Performance of composite connections: Major axis end-plate joints", J. Constructional Steel Research, 31(1), 31-57. https://doi.org/10.1016/0143-974X(94)90022-1
  8. Anon (1986), Fire Behaviour of Steel and Composite Construction, Verlag, TUV, Rheinland.
  9. Armer, G.S.T. and Moore, D.B. (1994),"Full-scale testing on complete multistorey structures", The Structural Engineer, 72(2), 30-31.
  10. Bailey, C.G., Burgess, I.W. and Plank, R.J. (1996),"Computer simulation of a full-scale structural fire test", The Structural Engineer, 74(6), 93-100.
  11. Bailey, C.G. (1998),"Development of computer software to simulate the structural behaviour of steel framed buildings in fire", Comput. Struct., 67, 421-438. https://doi.org/10.1016/S0045-7949(98)00096-0
  12. Bailey, C.G., Lennon, T. and Moore, D.B. (1999),"The behaviour of full-scale steel-framed building subjected to compartment fires", The Structural Engineer, 77(8), 15-21.
  13. Block, F., Burgess, I., Davison, B. and Plank, R. (2004a),"A component approach to modeling steelwork connections in fire: Behaviour of column webs in compression", Proc. of ASCE Structures Congress, Nashville, Tennessee.
  14. Block, F., Burgess, I. and Davison, B. (2004b),"Numerical and analytical studies of joint component behaviour in fire", Proc. of Third Int. Workshop Structures in Fire, Ottawa.
  15. Bravery, P.N.R. (1993),"Cardington large building test facility, Construction details for the first building", Building Research Establishment, Internal paper, Watford, pp. 158.
  16. British Steel (1982),"The performance of beam/column/beam connections in the BS476: Art 8 fire test", Reports T/RS/1380/33/82D and T/RS/1380/34/82D.
  17. Buchanan, A.H. (2002), Structural Design for Fire Safety, John Wiley & Sons, England.
  18. Burgess, I.E., El-Rimawi, J.A. and Plank, R.J. (1990),"Analysis of beams with non-uniform temperature profile due to fire", J. Constructional Steel Research, 16, 169-192. https://doi.org/10.1016/0143-974X(90)90008-5
  19. Cooke, G.M.E. and Latham, D.J. (1987),"The inherent fire resistance of a loaded steel framework", Steel Construction Today, no. 1, 49-58.
  20. Djubek, J. and Skaloud, M. (1976),"Postbuckling behaviour of web plates in the new edition of Czechoslovak design specifications", Proc. of Int. Conf. on Steel Plates Structures, Imperial College, London.
  21. Drysdale, D. (1999), An Introduction to Fire Dynamics, 2nd ed., John Wiley & Sons, West Sussex, England.
  22. El-Rimawi, J.A., Burgess, I.W. and Plank, R.J. (1997),"The influence of connections stiffness on the behaviour of steel beams in fire". J. Construction Steel Research, 43(1-3), 1-15. https://doi.org/10.1016/S0143-974X(97)00047-3
  23. El-Rimawi, J.A. (1989),"The behaviour of the flexural members under fire conditions". Doctoral Thesis, University of Sheffield, UK.
  24. El-Rimawi, J.A., Burgess, I.W. and Plank, R.J. (1999),"Studies of the behaviour of steel subframes with semirigid connections in fire", J. Construction Steel Research, 49, 83-98. https://doi.org/10.1016/S0143-974X(98)00002-9
  25. European Committee for Standardization (CEN) (2002), Draft prEN 1991-1-2: 200x, Eurocode 1: Actions on structures, Part 1.2: Actions on structures exposed to fire, Final Draft, April 2002, Brussels.
  26. European Committee for Standardization (CEN) (1995), EN - 1993-1-2: 1995, Part 1.2: Structural Fire Design, Eurocode 3: Design of Steel Structures, Brussels.
  27. European Committee for Standardization (CEN) (2005), EN 1993-1-2:2005, Eurocode 3: Design of steel structures, Part 1.2: Structural fire design, Stage 49 draft, June 2004, Brussels.
  28. European Committee for Standardization (CEN). (2004), EN 1993-1-8:2004, Eurocode 3: Design of steel structures, Part 1.8: Design of joints, Stage 49 draft, June 2004, Brussels.
  29. Franssen, J.-M. (2002),"Numerical determination of 3D temperature fields in steel joints", 2nd Int. Workshop Structures in Fire, Christchurch.
  30. Franssen, J.-M. (2003),"SAFIR. A thermal/structural program modelling structures under fire", Proc. NASCC 2003, A.I.S.C. Inc., Baltimore.
  31. Huang, S.F., Tan, K.H. and Ting, S.K. (2002),"Structural response of a steel beam within a frame during a fire", Advances in Steel Structures, 1111-1118.
  32. Iding, R., Bresler, B. and Nizamuddin, D. (1977),"FIRES-T3: A computer program for the fire response of structures- thermal". Fire Research Group Report $N^{\circ}$ UCB FRG 77-15, University of California, Berkeley.
  33. ISO 834 (1975). Fire Resistance Tests -Elements of Building Construction, International Organisation for Standardisation.
  34. Kirby, B.R. (1995),"The behaviour of high-strength grade 8.8 bolts in fire", J. Constructional Steel Research, 33, 3-38. https://doi.org/10.1016/0143-974X(94)00013-8
  35. Kruppa, J. (1976),"Resistance en feu des assemblages par boulons haute resistance", St. Remy-les-Chevreuse, Centre Technique Industriel de la Construction Metallique, France.
  36. Lawson, R.M. (1990),"Behaviour of steel-beam-to-column connections in fire", The Structural Engineer, 68(14), 263-271.
  37. Lennon, T, (1997)"Cardington fire tests: Survey of damage to the eight storey building", Building Research Establishment, Paper No127/97, pp. 56, Watford.
  38. Leston-Jones, L.C. (1997),"The influence of semi-rigid connections on the performance of steel framed structures in fire", Doctoral Thesis, University of Sheffield, UK.
  39. Leston-Jones, L.C., Burgess, I.W., Lennon, T., Plank, R.J. (1997),"Elevated-temperature moment-rotation tests on steelwork connections", Proc. Instn Civil Engrs, Structures & Buildings, 122, 410-419. https://doi.org/10.1680/istbu.1997.29830
  40. Liu, T.C.H. (1996),"Finite element modelling of behaviour of steel beams and connections in fire", J. Constructional Steel Research, 36(2), 181-199. https://doi.org/10.1016/0143-974X(95)00016-O
  41. Liu, T.C.H. (1998),"Effect of connection flexibility on fire resistance of steel beams", J. Constructional Steel Research, 45(1), 99-118. https://doi.org/10.1016/S0143-974X(97)00054-0
  42. Liu, T.C.H. (1999a),"Fire resistance of unprotected steel beams with moment connections", J. Constructional Steel Research, 51, 61-77. https://doi.org/10.1016/S0143-974X(99)00004-8
  43. Liu, T.C.H. (1999b),"Moment-rotation-temperature characteristics of steel/composite joints", J. Struct. Eng., ASCE, 125(10), 1188-1197. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:10(1188)
  44. Liu, T.C.H and Davies, J.M. (2001a),"Performance of steel beams at elevated temperatures under the effect of axial restraints", Steel and Composite Structures, 1(4), 427-440. https://doi.org/10.12989/scs.2001.1.4.427
  45. Liu, T.C.H., Fahad, M.K. and Davies, J.M. (2001b),"Catenary effect in axially restrained steel beam in fire", in C.-K. Choi, and H.-G. Kwak (eds.), Proc. First Int. Conf. on Steel & Composite Structures, ICSCS'01, Pusan, Korea, 1669-1676.
  46. Liu, T.C.H., Fahad, M.K. and Davies, J.M. (2002),"Experimental investigation of behaviour of axial restrained steel beams in fire", J. Constructional Steel Research, 58, 1211-1230. https://doi.org/10.1016/S0143-974X(01)00062-1
  47. Moore, D.B. (1995),"Steel fire tests on a building framed", Building Research Establishment, Paper No. PD220/ 95, Watford, pp. 13.
  48. Moore, D.B. and Lennon, T. (1997),"Fire engineering design of steel structures", Progress in Structural Engineering and Materials, 1(1), 4-9. https://doi.org/10.1002/pse.2260010104
  49. O'Conner, M.A. and Martin, M.D. (1998),"Behaviour of a multi-storey steel framed building subjected to fire attack", J. Constructional Steel Research, 46(1-3), Paper No. 169.
  50. Quintiere, J.G., Marzo, M., Becken, R. (2002),"A suggested cause of the fire-induced collapse of the World Trade Towers", Fire Safety Journal, 37, 707-716. https://doi.org/10.1016/S0379-7112(02)00034-6
  51. Ramberg, W. and Osgood, W. (1943),"Description of stress strain curves by three parameters", National Advisory Committee for Aeronautics. Technical Note 902.
  52. Rubert, A. and Schaumann, P. (1986),"Structural steel and plane frame assemblies under fire action", Fire Safety Journal, 10, 173-184. https://doi.org/10.1016/0379-7112(86)90014-7
  53. Saab, H.A. and Nethercot, D.A. (1991),"Modelling steel frame behaviour under fire conditions", Engineering of Structures, October, 371-382.
  54. Santiago, A., Simoes da Silva, L., Vila Real, P. and Franssen, J.M. (2003),"Effect of cooling on the behaviour of a steel beam under fire loading including the end joint response", Proc. of the 9th Int. Conf. on Civil and Structural Engineering Computing, ed. Topping, B.H.V., Civil-Comp Press, Stirling, United Kingdom, paper 65.
  55. Santiago, A., Simoes da Silva, L. and Vila Real, P. (2004),"Three-dimensional modeling of a beam-column subassembly under fire loading", Proc. of 10th Nordic Steel Construction Conf., 565-575, Copenhagen, Denmark.
  56. SCI (1991), Investigation of Broadgate phase 8 fire, Steel Construction Institute Forum.
  57. Simoes da Silva, L., Santiago, A. and Vila Real, P. (2001),"A component model for the behaviour of steel joint at high temperatures", J. Constructional Steel Research, 57(11), 1169-1195. https://doi.org/10.1016/S0143-974X(01)00039-6
  58. Simoes da Silva, L., Santiago, A. and Vila Real, P. (2002),"Post-limit stiffness and ductility of end plate beamto- column steel joints", Comp. Struct., 80, 515-531. https://doi.org/10.1016/S0045-7949(02)00014-7
  59. Spyrou, S., Davidson, J.B., Burgess, I. and Plank, R. (2004a),"Experimental and analytical investigation of the 'comprension zone' components within a steel joint at high temperature", J. Constructional Steel Research, 60, 841-865. https://doi.org/10.1016/j.jcsr.2003.10.005
  60. Spyrou, S., Davidson, J.B., Burgess, I. and Plank, R. (2004b),"Experimental and analytical investigation of the 'tension zone' components within a steel joint at high temperature", J. Constructional Steel Research, 60, 867-896. https://doi.org/10.1016/j.jcsr.2003.10.006
  61. The Steel Construction Institute (1990), Enhancement of Fire Resistance of Beams by Beam to Column Connections, Technical Report, SCI Publication 086.
  62. Vila Real, P. (2003), Incendio em estruturas metalicas, Portugal, Edicoes Orion.
  63. Usmani, A.S., Chung, Y.C. and Torero, J.L. (2003),"How did the WTC towers collapse: A new theory", Fire Safety Journal, 38, 501-533. https://doi.org/10.1016/S0379-7112(03)00069-9
  64. Wald, F., Chladna, M., Moore, D., Santiago, A. and Lennon, T. (2004),"The temperature distribution in a fullscale steel framed building subject to a natural fire", Proc. of the 2nd Int. Conf. of Steel and Composite Structures, Seoul, Korea.
  65. Wald, F., Simoes da Silva, L., Moore, D., Lennon, T., Chladna, M., Santiago, A., Bene?, M. and Borges, L. (2005),"Experimental behaviour of steel structure under natural fire", New Steel Construction, 13(3), 24-27.
  66. Wang, Y.C. (2002), Steel and Composite Structures - Behaviour and Design for Fire Safety, Spon Press, London.
  67. Weynand, K., Jaspart, J.P. and Steenhuis, M. (1995),"The stiffness model of revised annex J of Eurocode 3", Proc. of the 3rd Int. Workshop on Connections, Connections in Steel Structures, Behaviour, Strength and Design (Eds.: R. Bjorhovde, A. Colson, R. Zandonini) Trento, Italy, 441-452.
  68. Yin, Y.Z. and Wang, Y.C. (2004),"A numerical study of large deflection behaviour of restrained steel beams at elevated temperatures", J. Constructional Steel Research, 60, 1029-1047. https://doi.org/10.1016/j.jcsr.2003.09.005
  69. Yin, Y.Z. and Wang, Y.C. (2005a),"Analysis of catenary action in steel beams using a simplified hand calculation method, Part 1: Theory and validation for uniform temperature distribution", J. Constructional Steel Research, 61, 183-211. https://doi.org/10.1016/j.jcsr.2004.07.002
  70. Yin, Y.Z. and Wang, Y.C. (2005b),"Analysis of catenary action in steel beams using a simplified hand calculation method, Part 2: Validation for non-uniform temperature distribution", J. Constructional Steel Research, 61, 213-234. https://doi.org/10.1016/j.jcsr.2004.07.003

피인용 문헌

  1. Experiments on reverse-channel connections at elevated temperatures vol.49, 2013, https://doi.org/10.1016/j.engstruct.2012.12.025
  2. Reliability-based strength limit state for steel railway bridges vol.10, pp.9, 2014, https://doi.org/10.1080/15732479.2013.807291
  3. Behavior of portal frames of steel hollow sections exposed to fire vol.51, pp.2, 2012, https://doi.org/10.1016/j.aej.2012.06.004
  4. Fatigue reliability model for steel railway bridges vol.12, pp.12, 2016, https://doi.org/10.1080/15732479.2016.1153664
  5. Resistance of flush endplate connections under tension and shear in fire vol.86, 2013, https://doi.org/10.1016/j.jcsr.2013.03.015
  6. On the plastic moment-shear interaction curves of steel sections under fire vol.7, pp.2, 2016, https://doi.org/10.1108/JSFE-06-2016-008
  7. Assessment of the T-stub joint component at ambient and elevated temperatures vol.70, 2014, https://doi.org/10.1016/j.firesaf.2014.08.009
  8. Numerical study of a steel sub-frame in fire vol.86, pp.15-16, 2008, https://doi.org/10.1016/j.compstruc.2008.01.006
  9. Response of Steel Reduced Beam Section Connections Exposed to Fire vol.142, pp.1, 2016, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001340
  10. Modelling of beam-to-column connections at elevated temperature using the component method vol.10, pp.1, 2010, https://doi.org/10.12989/scs.2010.10.1.023
  11. Performance of beam-to-column joints in fire—A review vol.43, pp.1, 2008, https://doi.org/10.1016/j.firesaf.2007.01.002
  12. Experimental Evaluation of the Fire Performance of Simple Connections vol.143, pp.2, 2017, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001664
  13. An analytical approach to modelling shear panels in steel beams at elevated temperatures vol.85, 2015, https://doi.org/10.1016/j.engstruct.2014.12.016
  14. Numerical predictions of the time-dependent temperature field for the 7thCardington compartment fire test vol.5, pp.6, 2005, https://doi.org/10.12989/scs.2005.5.6.421
  15. Towards a consistent design approach for steel joints under generalized loading vol.64, pp.9, 2008, https://doi.org/10.1016/j.jcsr.2008.02.017
  16. Semi-rigid connection modeling for steel frameworks vol.35, pp.4, 2005, https://doi.org/10.12989/sem.2010.35.4.431
  17. Simple equations for the calculation of the temperature within the cross-section of slim floor beams under ISO Fire vol.13, pp.2, 2005, https://doi.org/10.12989/scs.2012.13.2.171
  18. Numerical analysis of partially fire protected composite slabs vol.14, pp.1, 2005, https://doi.org/10.12989/scs.2013.14.1.021
  19. Fatigue Assessment of Existing Shiploaders vol.891, pp.None, 2005, https://doi.org/10.4028/www.scientific.net/amr.891-892.803
  20. Review of Research on the Fire Behavior of Simple Shear Connections vol.57, pp.4, 2021, https://doi.org/10.1007/s10694-021-01105-1