참고문헌
- Marzocca, P., Librescu, L. and Chiocchia, G., 2001, 'Aeroelastic Response of a 2-D Lifting Surfaces to Gust and Arbitrary Explosive Loading Signatures,' International Journal of Impact Engineering, Vol. 25, No. 1, pp. 41-65 https://doi.org/10.1016/S0734-743X(00)00033-6
- Librescu, L. Na, S. Marzocca, P. Chung, C. Kwak, M. 'Active Aeroelastic Control of 2-D Wing-flap Systems Operating in an Incompressible Flowfield and Impacted by a Blast Pulse,' Journal of Sound and Vibration (in press)
- Edwards, J. W., 1977, 'Unsteady Aerodynamic Modeling and Active Aeroelastic Control, SUDARR 504, Standford Univ. Also Available as NASA CR-148019
- Dowell, E. H., Crawley, E. F., Curtiss, H. C. Jr., Peters, D. A., Scanlan, R. H. and Sisto, F., 1978, 'A Modern Course in Aeroelasticity,' Sijthoff and Noordhoff
- Na, S. and Librescu, L., 2000, 'Optimal Vibration Control aof thin-Walled Anisotrpic Cantilevers Exposed to Blast Loading,' Journal of Guidance, Control, and Dynamics, Vol. 23, No. 3, pp. 491-500 https://doi.org/10.2514/2.4555
- Scherer, C., Gahinet, P. and Chilali, M., 1997, 'Multiobjective Output-feedbak Control via LMI Optimization', IEEE Trans. on Automatic Control, Vol. 42, No. 7, pp. 896-911 https://doi.org/10.1109/9.599969
-
Khargonekar P. P. and Rotea, M. A., 1991, 'Mixed
$H_2/H_{\infty}$ control: A Convex Optimization Approah', IEEE Transaction on Automatic Control, Vol. 36, No. 7, pp. 824-837 https://doi.org/10.1109/9.85062 - Gahinet, P., Nemirovski, A., Laub, A. J., and Chilali, M., 1995, 'LMI Control Toolbox', The Math Works Inc.
-
Chilali, M. and Gahinet, P., 1996,
$H_{\infty}$ Design with Pole Placement Constraints: An LMI Approach', IEEE Transactions on Automatic Control, Vol. 41, No. 3pp.358-367 https://doi.org/10.1109/9.486637 - Olds, S. D., 1997, 'Modeling and LQR Control of a Two-dimensional Airfoil,' MS Thesis, Department of Mathematifs, Virgini polytechnic Institute and State Univerty. Blacksburg, VA
- Djayapertapa, L. and Allen, C. B.,2002, 'Numerical Simulation of Active Control of Transonic Flutter,' Proc. Of the 23rde ICAS Congress, Toronto, 411.1-411.10