Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A study on the Analysis and Evaluation of Cutting forces for High Speed Machining by a Ball-end mill

볼엔드밀의 고속가공에서 절삭력 분석 및 평가에 관한 연구

  • 이춘만 (창원대학교 기계설계공학과) ;
  • 류승표 (창원대학교 대학원 기계설계공학과) ;
  • 고태조 (영남대학교 기계공학부) ;
  • 정종윤 (창원대학교 산업시스템공학과) ;
  • 정원지 (창원대학교 기계설계공학과)
  • Published : 2005.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

High-speed machining is one of the most effective technologies to improve productivity Because of the high speed and high feed rate, high-speed machining can give great advantages for the machining of dies and molds. This paper describes on the analysis and evaluation of cutting force in high-speed machining. Cutter rotation directions, slope directions, spindle revolution and depth of cut are control factors for cutting force. The effect of the control factors on cutting force is investigated for the high speed machining of STD11.

Keywords

References

  1. King, R. I., Vaughn, R. L., 'A Synoptic view of High-Speed Machining From Salomon to the Present,' Ann. ASME, pp. 1-13, Dec. 1984
  2. Tlusty, J., 'High speed milling,' Proceedings of the 6th Int. machine tool engineers conference(IMEC), pp. 35-60, 1994
  3. Lee, J. C., 'High Speed Machining,' The Korean Society of Machine Tool Engineers, Spring Conference, pp 8-10, 1998
  4. Ko, T. J., Jeong, H., Kim, H. S., 'Selection of Machining Inclination Angle of Tool Considering Tool Wear in High Speed Ball End Milling,' J. of Korean Society of Precision Engineering, Vol. 15, No.9, pp. 135-144, 1998
  5. Kahles, J. F., Field, M. and Harvey, S. M., 'High Speed Machining Possilities and Need,' CIRP, Vol. 27/2, pp. 551-560, 1978
  6. Lee, C. M., Kweon, B. D., Ko, T. J, Jung, J. Y., Chung, W. J., 'A Study on the Improvement of Machining Accuracy in High Speed Machining using Design of Experiments,' J. of Korean Society of Precision Engineering, Vol. 19, No. 7, pp. 88-96, 2002
  7. Schulz, H., Hock, St., 'High-speed Milling of Dies and Molds - Cutting Conditions and Technology,' Annals of the CIRP, Vol. 44, No.1, pp. 35-38, 1995 https://doi.org/10.1016/S0007-8506(07)62270-7
  8. Choi, B. K., Robert, B. J., 'Sculptured Surface Machining,'. KLUWER ACADEMIC PUBLISHERS, pp. 242-247, 1998
  9. Hahn, D. W., Ko, S. L., Lee, K. W., 'Determination of Optimal Cutting Conditions Based on the Relationship between Tool Grade and Workpiece Material,' Journal of the Korean Society of Precision Engineering, Vol. 15, No. 6, pp. 79-89, 1998
  10. Park, H. Y., Ko, H. J., Jung, Y. G., 'A Study on Processing Technology of High-Speed and High-Accuracy for Metal Mold Cuttin,' Proceedings of the Korean Society of Machine Tool Engineers Conference, pp. 221-226, 1999
  11. Kahng, C. H., 'Machine Tool Technology : The Present and The Future (3),' J. of Korean Society of Precision Engineering, Vol. 12, No. 6, pp. 5-12, 1995
  12. Son, C. S., Kang, M. C., Kim, J. S., Lee, D. W., Hwang, K. H., Kim, J. K., 'High Speed Machining of Difficult-to-cut Material using Ball Endmill,' Proceedings of the Korean Society of Machine Tool Engineers Conference, pp. 139-142, 1997