Trace impurity analysis of Cu films using GDMS: concentration change of impurities by applying negative substrate bias voltage

글로우방전 질량분석법을 이용한 구리 박막내의 미량불순물 분석: 음의 기판 바이어스에 의한 불순물원소의 농도변화

  • Lim Jae-Won (Institute of Multidisciplinary Research for Advanced Materials, Tohoku University) ;
  • Isshiki Minoru (Institute of Multidisciplinary Research for Advanced Materials, Tohoku University)
  • 임재원 (동북대학 다원물질과학연구소) ;
  • Published : 2005.03.01

Abstract

Glow discharge mass spectrometry(GDMS) was used to determine the impurity concentrations of the deposited Cu films and the 6N Cu target. Cu films were deposited on Si (100) substrates at zero substrate bias voltage and a substrate bias voltage of -50 V using a non-mass separated ion beam deposition method. Since do GDMS has a little difficulty to apply to thin films because of the accompanying non-conducting substrate, we have used an aluminum foil to cover the edge of the Cu film in order to make an electrical contact of the Cu film deposited on the non-conducting substrate. As a result, the Cu film deposited at the substrate bias voltage of -50 V showed lower impurity contents than the Cu film deposited without the substrate bias voltage although both the Cu films were contaminated during the deposition. It was found that the concentration change of each impurity in the Cu films by applying the negative substrate bias voltage is related to the difference in their ionization potentials. The purification effect by applying the negative substrate bias voltage might result from the following reasons: 1) Penning ionization and an ionization mechanism proposed in the present study, 2) difference in the kinetic energy of accelerated Cu+ ions toward the substrate with/without the negative substrate bias voltage.

본 논문은 글로우방전 질량분석법(Glow Discharge Mass Spectrometry: GDMS)을 이용하여 구리 박막내의 미량 불순물의 농도분석과 음의 기판 바이어스에 대한 구리 박막내의 불순물의 농도변화에 대해서 고찰하였다. 구리 박막은 실리콘 기판 위에 비질량 분리형 이온빔 증착장비를 이용하여 기판 바이어스를 걸지 않은 경우와 -50 V의 기판 바이어스를 걸은 상태에서 증착하였다. 전기를 통하지 않는 분석 샘플의 경우, 직류(DC) GDMS에 의한 분석시, 샘플 표면에서의 charge-up 효과에 의해 분석에 어려움이 있었지만, 본 실험에서는 간편하게 분석이 가능하도록 샘플을 알루미늄 포일(foil)로 감싸서 구리 박막으로부터 실리콘 기판 뒤의 샘플 홀더까지 전기적 접촉이 이루어지도록 하였다. 구리 타겟과 증착된 구리 박막들에 대한 GDMS 분석결과에 의해서, 전체적으로 박막내의 불순물의 양이 음의 기판 바이어스에 의해 줄어듦으로써 구리 박막의 전체 순도를 높일 수 있다는 것을 알게 되었다. 음의 기판 바이어스에 의한 불순물들의 농도변화는 각각의 불순물의 이온화 포텐셜의 차이에 의한 것으로, 박막 증착시 플라즈마내의 Penning ionization effect와 본 논문에서 제시한 이온화 과정에 의해 각 불순물의 농도변화가 설명되어질 수 있었다. 또한, 기판 위에서의 구리 이온들의 충격에 의한 cleaning effect도 박막내의 불순물의 농도변화에 기여했다고 판단된다.

Keywords

References

  1. C. A. Chang and C. K. Hu, Appl. Phys. Lett. 57, 617 (1990) https://doi.org/10.1063/1.104249
  2. M. O'Reilly, X. Jiang, J. T. Beechinor, S. Lynch, C. Ni Dheasuna, J. C. Patterson, and G. M. Grean, Appl. Surf. Sci. 91, 152 (1995) https://doi.org/10.1016/0169-4332(95)00111-5
  3. M. Van Straaten, K. Swenters, R. Gijbels, J. Verlinden, and E. Adriaenssens, J. Anal. At. Spectrom. 9, 1389 (1994) https://doi.org/10.1039/ja9940901389
  4. J. S. Becker and H. -J. Dietze, Spectrochim. Acta B 53, 1475 (1998) https://doi.org/10.1016/S0584-8547(98)00110-4
  5. R. K. Marcus, J. Anal. At. Spectrom. 8, 935 (1993) https://doi.org/10.1039/ja9930800935
  6. T. E. Gibeau and R. K. Marcus, J. Anal. At. Spectrum. 13, 1303 (1998) https://doi.org/10.1039/a803894e
  7. D. M. Wayne, R. K. Schulze, C. Maggiore, D. W. Cooke, and G. Havrilla, Appl. Spectrosc. 53, 266 (1999) https://doi.org/10.1366/0003702991946640
  8. W. Schelles and R. V. Grieken, J. Anal. At. Spectorm. 12, 49 (1997) https://doi.org/10.1039/a703102e
  9. C. Lazik and R. K. Marcus, Spectrochimica Acta. 48B, 1673 (1993)
  10. 임재원, 배준우, Minoru Isshiki, 한국진공학회지 12, 174 (2003)
  11. 임재원, Minoru Isshiki, 한국진공학회지 12, 136 (2003)
  12. W. Vieth and J. C. Huneke, Spcetrochimica Acta. 46B, 137 (1991)
  13. P. Gregory, A. J. Bangay, and T. L. Bird, Metallurgia 71, 207 (1965)
  14. J. W. Coburn and E. Kay, Appl. Phys. Lett. 18, 435 (1971) https://doi.org/10.1063/1.1653483
  15. E. E. Muschlitz, Science 159, 599 (1968) https://doi.org/10.1126/science.159.3818.968
  16. D. R. Lide, Handbook of Chemistry and Physics (New York CRC press) pp. 10-207
  17. T. Takagi, Thin Solid Films 92, 1 (1982) https://doi.org/10.1016/0040-6090(82)90183-3