참고문헌
- Michelic, A., Stok, B., 'Tool Design Optimization in Extrusion,' Computers and Structures, Vol. 68, pp. 283-293, 1998 https://doi.org/10.1016/S0045-7949(98)00019-4
- Kalpakjian, S., 'Manufacturing Processes for Engineering Materials,' 2nd Edition, Addition- Wesley, USA, 1991
- Pale, J.A. and Altan, T., 'Development of equipments and capabilities for investigation of the multi-action forming of complex parts,' Eng. Res. Center Net Shape Manuf., p.8, 1989
- Lin, F. C. and Lin, S. Y., 'Radius Ratio Estimation and Fold Situation Prediction of the Deformation Profile in Forging-Extrusion Process,' Computers and Struc-tures, Vol. 80, pp. 1817-1826, 2002 https://doi.org/10.1016/S0045-7949(02)00220-1
- Lee, Y. S., Hwang, S. K., Chang, Y. S. and Hwang, B. B., 'The Forming Characteristics of Radial-Forward Extrusion,' J. of Mater. Proc. Tech., Vol. 113, pp. 136-140, 2001 https://doi.org/10.1016/S0924-0136(01)00705-1
- Choi, H. J., Choi, J. H. and Hwang, B. B., 'The Forming Characteristics of Radial-Backward Extrusion,' J. of Mater. Proc. Tech., Vol. 113, pp. 141-147, 2001 https://doi.org/10.1016/S0924-0136(01)00703-8
- Air Force Materials Laboratory, 'Forging Equipment, Materials and Practices,' Metals and Ceramics Information Center, p. 164, 1973
- Paul De Garmo, E., 'Material and Processes in Manufacturing, Macmillan,' New York, p. 27, 1967
- Paul De Garmo, E., 'Material Properties and Manufacturing Processes,' Malloy, Ann Arbor, MI, p.31, 1966
- Schey, J. A., Ed., 'Metal Deformation Processes- Friction and Lubrication,' Marcel Dekker, New York, 1970
- Thomson, E. G., 'Friction in Forming Processes,' Annuls CIRP, Vol. 17, p. 149, 1969
- Hwang, S. M. and Kobayashi, S., 'A Note on Evaluation of Interface Friction in Ring Test,' Proc. NAMRC XI, University of Wisconsin, Madison, WI, p. 193, 1983
- Oh, S. I., Lahoi, G. D., Altan, T., 'ALPID-a General Purpose FEM Program for Metal Forming,' Proceeding of NAMRC. IX, State College, Pennsylvania, 1981
- Ko, B. D., Lee, S. H., Kim, D. J. and Hwang B.B., 'The Influence of Die Geometry on the Radial Extrusion Processes,' J. of Material Processing Tech., Vol. 113, pp. 109-114, 2001 https://doi.org/10.1016/S0924-0136(01)00704-X
- Lee, S.H., 'Forming characteristics of radial extrusion, Master Dissertation,' Inha University, Inchon, Korea, p. 20, 1999
- Walters, J., Kurtz, S., Wu, W. T. and Tang, J., 'The 'State of Art'in Cold Forming Simulation,' J. of Material Processing Tech., Vol. 71, pp. 64-70, 1997 https://doi.org/10.1016/S0924-0136(97)00143-X
- Rodrigues, J. M. C., Peterson, S. B., Martins, P. A. F. and Barata Marques, M. J. M., 'Towards Net-shape of Tubular Components,' Int. J. of Mach. Tools Manufact., Vol. 36, pp. 399-409, 1996 https://doi.org/10.1016/0890-6955(95)00020-8
- Gouveia, B. P., Rodrigues, J. M. C. and Martins, P. A. F., 'Steady-State Finite Element Analysis of Cold Forward Extrusion,' J. Material Processing Tech., Vol. 73, pp. 281-288, 1961
- Pale, J.A. and Altan, T., Development of equipments and capabilities for investigation of the multi-action forming of complex parts, Eng. Res. Center Net Shape Manuf., p.17, 1989
- Balendra, R. and Qin, Y., 'Identification and Classification of Flow-Dependent Defects in the Injection Forging of Solid Billets,' J. of Material Processing Tech., Vol. 106, pp. 199-203, 2000 https://doi.org/10.1016/S0924-0136(00)00614-2
- Wang, Z., Lu, J. and Wang, Z. R., 'Numerical and Experimental Research of the cold Upsetting- Extruding of Tube Flanges,' J. of Material Processing Tech., Vol. 110, pp. 28-35, 2001 https://doi.org/10.1016/S0924-0136(00)00863-3
- Colla, D., Petersen, S. B. and Martins, P. A. F., 'An Investigation into the Preforming of Tubes,' Int. J. of Mach. Sci., Vol. 39, No. 5, pp. 507-520, 1997