참고문헌
- 'Nanocomposites: Forword', Composites:Part B., 35, 75-77 (2004) https://doi.org/10.1016/j.compositesb.2003.12.001
- R. A. Vaia and H. D. Wagner, 'Framework for nanocomposites', Materialstoday (2004)
- J. E. Mark, 'Ceramic reinforced polymers and polymer-modified ceramics', Polym. Eng. Sci., 36, 2905-2920 (1996) https://doi.org/10.1002/pen.10692
- E. Reynaud, C. Gauthier, and J. Perez, 'Nanophases in polymers', Rev. Metall./Cah. Inf. Tech., 96, 169-176 (1999)
- T. von Weme and T. E Patten 'Preparation of structurally well defined polymer-nanoparticle hybrids with controlled/living radical polymerization', J. Am. Chem, Soc., 121, 7409-7410 (1999) https://doi.org/10.1021/ja991108l
- N. Herron and D. L. Thorn, 'Nanoparticles. Uses and relationships to molecular clusters', Adv. Mater., 10, 1173-1184 (1998) https://doi.org/10.1002/(SICI)1521-4095(199810)10:15<1173::AID-ADMA1173>3.0.CO;2-6
- P. Calvert, 'Potential applications of nanotubes, in: T.W.Ebbesen (Ed.), Carbon Nanotubes', pp. 277-292, CRC Pressn Boca Raton, FL (1997)
- V. Favier, G. R. Canova, S. C. Shrivastava, and 1. Y. Cavaille, 'Mechanical percolation in cellulose whiskers nanocomposites', Polym. Eng. Sci., 37, 1732-1739 (1997) https://doi.org/10.1002/pen.11821
- B. K. G. Theng, 'The Chemistry of Clay-Organic Reactions', Wiley, New York(1974)
- M. Ogawa and K. Kuroda, 'Preparation of inorganic-organic nanocomposites through intercalation of prganoammonium ions into layered silicates', Bull. Chem. Soc. Jpn., 70, 2593-2618 (1997) https://doi.org/10.1246/bcsj.70.2593
- A. Blumstein, 'Etude de polymerizations en couche adsorbee I', Bull. Chim. Soc., 899-905 (1961)
- A. Blumstein, 'Polymerization of adsorbed monolayers: II. Thermal degradation of the inserted polymers', J. Polym. Sci. A., 3, 2665-2673 (1965)
- B. K. G. Theng, 'Formation and properties of clay-polymer complexes', Amsterdam: Elsevier (1979)
- A. Okada, M. Kawasumi, A. Usuki, Y. Kojima, T. Kurauchi, and O. Kamigaito, 'Synthesis and properties of nylon-6/clay hybrids', In: Schaefer DW, Mark JE, editors., 'Polymer based molecular composites. MRS Symposium Proceeding', Pittsburgh., 171, 45-50 (1990)
- R. A. Vaia, H. Ishii, and E. P. Giannelis, 'Synthesis and properties of two-dimensional nanostructures by direct intercalation of polymer melts in layered silicates', Chem. Mater., 5, 1694-6 (1993) https://doi.org/10.1021/cm00036a004
- S. S. Ray and M. Okamoto, 'Polymer/layered silicate nanocomposites: a review from preparation to processing', Prog. Polym. Sci., 28, 1539-1641 (2003) https://doi.org/10.1016/j.progpolymsci.2003.08.002
- C. Oriakhi, 'Nano sandwiches', Chem. Br. 34, 59-62 (1998)
- Y. Kojima, A, Usuki, M. Kawasumi, A. Okada, Y. Fukushima, T. Karauchi, and O. Kamigaito, 'Mechanical properties of nylon-6-clay hybrid', J Mater. Res., 8,1185-1189 (1993) https://doi.org/10.1557/JMR.1993.1185
- R. Krishnamoorti and E. P. Giannelis, 'Rheology of End-Tethered Polymer-Layered Silicate Nanocomposites', Macromolecules., 30, 4097 (1997)
- E. P. giannelis, R. Krishnamoorti, and E. Manias, 'Polymer-silica nanocomposites: model systems for confined polymers and polymer brushes', Adv. Polym. Sci., 118, 108-147 (1999)
-
B. Lepoittevin, N. Pantoustier, M. Devalckenaere, and M. P. Dubois, 'Poly(epsilon
$\epsilon$ -caprolactone)/ clay nanocomposites by in-situ intercalative - polymerization catalyzed by dibutyltin dimethoxide', Macromolecules, 35, 8385-8390 (2002) https://doi.org/10.1021/ma020300w - T. Lan, P. D. Kaviratna, and T. J. Pinnavaia, 'Mechanism of clay tactoidexfoliation in epoxy-clay nanocomposites', Chem. Mater., 7, 2144-2150, (1995) https://doi.org/10.1021/cm00059a023
- C. Zilg, R. Thomann, J. Finter, and R. Mulhaupt, 'The influence of silicate modification and compatibilizers on mechanical properties and morphology of anhydride-cured epoxy nanocomposites', Macromolecular Materials and engineering., 280, 41-46 (2000) https://doi.org/10.1002/1439-2054(20000801)280:1<41::AID-MAME41>3.0.CO;2-Z
- Y. C. Ke, J. K. Lu, X. S. Vi, J. Zhao, and Z. N. Qi, 'The effects of promoter and curing process on exfoliation behavior of epoxy/clay nanocomposites', J Appl. Polym. Sci., 78, 808-815 (2000) https://doi.org/10.1002/1097-4628(20001024)78:4<808::AID-APP140>3.0.CO;2-9
- M. Wang' and T. J. Pinnavaia, 'Clay-Polymer Nanocomposites Formed from Acidic Derivatives of Montmorillonite and an Epoxy Resin', Chem. Materials, 6, 468 (1994)
- P. B. Messersmith and E. P. Giannelis, 'Synthesis and Characterization of Layered Silicate-Epoxy Nanocomposites', Chem. Mater., 6, 1719 (1994)
- J. M. Brown, D. Curliss, and R. A. Vaia, 'Thermoset-Layered Silicate Nanocomposites. Quaternary Ammonium Montmorillonite with Primary Diamine Cured Epoxies', Chem. Mater., 12, 3376 -3384 (2000) https://doi.org/10.1021/cm000477+
- P. Aranda, E. Ruiz-Hitzky, 'Poly(ethylene oxide)silicate intercalation materials', Chem. Mater., 4, 1395-1403 (1992) https://doi.org/10.1021/cm00024a048
- D. J. Greenland, 'Adsorption of poly(vinyl alcohols) by montmorillonite', J Colloid. Sci., 18; 647-664 (1963) https://doi.org/10.1016/0095-8522(63)90058-8
- C. W. Francis, 'Adsorption of polyvinylpyrrolidone on reference clay minerals', Soil. Sci., 115, 40-54 (1973) https://doi.org/10.1097/00010694-197301000-00007
- X. Zhao, K. Urano, and S. Ogasawara, 'Adsorption of poly( ethylene vinyl alcohol) from aqueous solution on montmorillonite clays', Colloid. Polym. Sci., 267, 899-906 (1989) https://doi.org/10.1007/BF01410338
-
G. Jimenes, N. Ogata, H. Kawai, and T. Ogihara, 'Structure and thermal/mechanical properties of poly(
$\epsilon$ -caprolactone )-clay blend', J. Appl. Polym. Sci., 64, 2211-2220 (1997) https://doi.org/10.1002/(SICI)1097-4628(19970613)64:11<2211::AID-APP17>3.0.CO;2-6 - N. Ogata, C. Jimenez, H. Kawai, and T. Ogihara, 'Structure and thermal/mechanical properties of poly(L-lactide)-clay blend', J. Polym. Sci. Part B: Polym. Phys., 35, 389-96 (1997) https://doi.org/10.1002/(SICI)1099-0488(19970130)35:2<389::AID-POLB14>3.0.CO;2-E
- H. G. Jeon, H. T. Jung, S. W. Lee, and S. D. Hudson, 'Morphology of polymer silicate nanocomposites. High density polyethylene and a nitrile', Polym. Bull., 41, 107-113 (1998) https://doi.org/10.1007/s002890050339
- H. J. Choi, S. G. Kim, Y. H. Hyun, and M. S. Jhon, 'Preparation and rheological characteristics of solvent-cast poly( ethylene oxide )/montmorillonite nanocomposites', Macromol Rapid Common, 22, 320-325 (2005)
- Y. Kojima, A, Usuki, M. Kawasumi, A. Okada, T. Karauchi, and O. Kamigaito, 'Synthesis of nylon6-clay hybrid by montmorillonite intercalated with s-caprolactam', J. Polym. Sci. Part A: Polym. Chem., 31, 983-986 (1993) https://doi.org/10.1002/pola.1993.080310418
- Y. Kojima, A, Usuki, M. Kawasumi, A. Okada, T. Karauchi, and O. Kamigaito, 'One-pot synthesis of nylon-6-clay hybrid', J. Polym. Sci. Part A: Polym. Chem.,31, 1755-1758 (1993) https://doi.org/10.1002/pola.1993.080310714
- L. M. Liu, Z. N. Qi, and X. G. Zhu, 'Studies on nylon-S clay nanocomposites by melt-intercalation process', J. Appl. Polym. Sci., 71, 1133-1138 (1999) https://doi.org/10.1002/(SICI)1097-4628(19990214)71:7<1133::AID-APP11>3.0.CO;2-N
- Z. Wang and T. J. Pinnavaia, 'Hybrid organicinorganic nanocomposites: exfoliation of magadiite nanolayers in an elastomeric epoxy polymer', Chem. Mater., 10, 1820-1826 (1998) https://doi.org/10.1021/cm970784o
- T. Lan, P. D. Kaviratna, and T. J. Pinnavaia, 'Mechanism of clay tactoid exfoliation in epoxyclay nanocomposites', Chem. Mater., 7, 2144-2150 (1995) https://doi.org/10.1021/cm00059a023
- C. Zilg, R. Mulhaupt, and J. Finter, 'Morphology and toughness/stiffness balance of nanocomposites based upon anhydride-cured epoxy resins and layered silicates', Macromol. Chem. Phys., 200, 661-670 (1999) https://doi.org/10.1002/(SICI)1521-3935(19990301)200:3<661::AID-MACP661>3.0.CO;2-4
- D. C. Lee and L. W. Jang, 'Preparation and characterization of PMMA-clay hybrid composite by emulsion polymerization', J. Appl. Polym. Sci., 61, 1117-1122 (1996) https://doi.org/10.1002/(SICI)1097-4628(19960815)61:7<1117::AID-APP7>3.0.CO;2-P
- N. Hasegawa, M. Kawasumi, M. Kato, A. Usuki, and A. Okada, 'Preparation and mechanical properties of polypropylene-clay hybrids using a maleic anhydride-modified polypropylene oligomer', J. Appl. Polym., 67, 87-92 (1998) https://doi.org/10.1002/(SICI)1097-4628(19980103)67:1<87::AID-APP10>3.0.CO;2-2
- M. W. Noh and D. C. Lee, 'synthesis and characterization of PS-clay nanocomposite by emulsion polymerization', Polym. Bull., 42, 619-626 (1999) https://doi.org/10.1007/s002890050510
- Z. wang and T. J. Pinnavaia, 'Nanolayer reinforcement of elastomeric polyurethane', Chem. Mater., 10, 3769-3771 (1998) https://doi.org/10.1021/cm980448n
- S. J. Wang, C. F. Long, X. Y. Wang, Q. Li, and Z. N. Qi, 'Synthesis and properties of silicone rubber organomontmorillonite hybrid nanocomposites', J. Appl. Polym. Sci., 69, 1557-1561 (1998) https://doi.org/10.1002/(SICI)1097-4628(19980822)69:8<1557::AID-APP10>3.0.CO;2-S
- Y. Yang, Z. -K. Zhu, J. Yin, X. -Y. Wang, and Z. -E. Qi, 'Preparation and properties of hybrids of organo-soluble polyimide and montmorillonite with various chemical surface modification methods', Polymer, 40, 4407-4414 (1999) https://doi.org/10.1016/S0032-3861(98)00675-2
- S. D. Burnside and E. P. Giannelis, 'Synthesis and properties of new poly( dimethylsiloxane) nano- composites', Chem. Mater., 7, 1597-1600
- J. W. Gilman, 'Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites', Applied Caly Science, 15, 31-49 (1999) https://doi.org/10.1016/S0169-1317(99)00019-8
- R. A. Vaia, G. Price, P. N. Ruth, H. Y. Nguyen, and J. Lichtenhan, 'Polymer/layered silicate nanocomposites as high performance ablative materials', Applied Clay Science, 15, 67-92 (1999) https://doi.org/10.1016/S0169-1317(99)00013-7
- K. Yano, A. Usuki, A. Okada, T. Kurauchi, and O. Kamigaito, 'Synthesis and properties of polyimide-clay hybrid', J. Polym. Sci. Part A: Polym. Chem., 31, 2493-2498 (1993) https://doi.org/10.1002/pola.1993.080311009
- K. Uano, A. Usuki, and A. Okada, 'Synthesis and properties of polyimide-clay hybrid films', J. Polym. Sci. Part A: Polym. Chem., 35, 2289-2294 (1997) https://doi.org/10.1002/(SICI)1099-0518(199708)35:11<2289::AID-POLA20>3.0.CO;2-9
- A. A. Gusev and H. R. Lusti, 'Rational Design of nanocomposite for barrier applications', Advanced Materials, 13, 1641 (2001)
- S. S Ray, K. Yamada, M. Okamoto, A. Ogami, and K. Ueda, 'New polylactide/layered silicate nanocomposites. 3. High performance biodegradable materials', Chem. Mater., 15, 1456-1465 (2003) https://doi.org/10.1021/cm020953r
- L. Nielsen, 'Platelet particles enhance barrier of polymers by forming tortuous path', J. Macromol. Sci. Chem., A1(5), 929-942 (1967)
- R. Xu, E. Manias, A. J. Snyder, and J. Runt, 'New biomedical poly(urethane uera)-layered silicate nanocomposites', Macromolecules, 34, 37-339 (2001)
- R. K. Bharadwaj, 'Modeling the barrier properties of polymer-layered silicate nanocomposites', Macromolecules., 34, 1989-1992 (2001)
- R. A. Vaia, S. Vasudevan, W. Krawiec, L. G. Scanlon, and E. P. Giannelis, 'New polymer electrolyte nanocomposites: melt intercalation of poly (etylene oxide) in mica-type silicates', Adv. Mater., 7, 154-156 (1995) https://doi.org/10.1002/adma.19950070210
- J. C. Hutchison, R. Bissessur, and D. F. Shiver, 'Conductivity anisotropy of polyphosphazene-montmorillonite composite electrolytes', Chem. Mater., 8, 1597-1599 (1996) https://doi.org/10.1021/cm960039w
- M. Alexandre, G. Beyer, C. Henrist, R. Cloots, A. Rulmont, and P. Dubois, in preparation