Architectural research

  • 제7권2호
  • /
  • Pages.61-68
  • /
  • 2005
  • /
  • 1229-6163(pISSN)
  • /
  • 2383-5575(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지

Design of Reinforced Concrete Members for Serviceability Based on Utility Theory

  • Lee, Young Hak (Dong Yang Structural Engineers, Co., Ltd.) ;
  • Kim, Sang Bum (Research Institute of Industrial Science & Technology, Steel Structure Research Laboratory)
  • 투고 : 2005.08.21
  • 발행 : 2005.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A methodology for design of reinforced concrete members for serviceability in general and deflection control in particular is presented based on application of utility theory. The approach is based on minimizing total cost including both initial construction and cost of failure considering variability in structural behavior and various forms of serviceability loss function. The method is demonstrated for the case of a simply supported slab for example.

키워드

참고문헌

  1. ACI Committee 209 (1992). Prediction of creep, shrinkage, and temperature effects in concrete structures, ACI Manual of Concrete Practice: Part 1, Michigan
  2. ACI Committee 318 (2005). Building Code Requirements for Structural Concrete (ACI 319-05) and Commentary (318R-05), American Concrete Institute, Farmington Hills, Mich
  3. Ayoub, H., and Karshenas, S. (1994). 'Survey results for construction live loads on newly poured slabs.' ASCE Journal of Structural Engineering, 120(5), 1543-1562 https://doi.org/10.1061/(ASCE)0733-9445(1994)120:5(1543)
  4. Bazant, Z. P. (1985). 'Probabilistic analysis of creep effects in concrete structure.' 4th International Conference of Structural Safety and Reliability, I331-I344
  5. Branson, B. E. (1963). Instantaneous and time-dependent deflections of simple and continuous reinforced concrete beams. HPR Publication 7: Part 1: 1-78, Alabama Highway Department, Bureau of Public Roads
  6. Bureau of Labor Statistics (2003). National Compensation Survey: Occupational Wages in the United States, July 2002. U.S Department of Labor, Washington, D.C.
  7. Choi, B-S, Scanlon, A., and Johnson, P. A. (2004). 'Monte Carlo simulation of immediate and time-dependent deflections of reinforced concrete beams and slabs.' ACI Structural Journal, 101(5), 633-641
  8. Ellingwood, B., and Culver, C. C. (1977). 'Analysis of live loads in office building.' ASCE J. Struct. Div., 103(8), 1551-1560
  9. El-Shahhat, A. M., Rosowsky, D. V., and Chen, W. F. (1993). 'Construction safety of multistory concrete buildings.' ACI Struct. J., 90(4), 335-341
  10. Graham, C. J., and Scanlon, A. (1988). 'Long-time multipliers for estimating two-way slab deflection.' ACI J., 83(6), 899-908
  11. Hossain, N. B., and Stewart, M. G. (2001). 'Probabilistic models of damaging deflections for floor elements.' ASCE J. Performance of Constructed Facilities, 15(4), 135-140 https://doi.org/10.1061/(ASCE)0887-3828(2001)15:4(135)
  12. Julian, O. G. (1966). 'Discussion of strength variations in ready-mixed concrete by A. E. Cummings.' ACI J., 51(9), 772-4-772-8
  13. Mayer, H., and Rusch, H. (1967). Building damage caused by deflection of reinforced concrete building components. Tech. Translation 1412, National Research Council of Canada, Ottawa
  14. Mirza, S. A., Hatzinikolas, M., and MacGregor, J. G. (1979). 'Statistical descriptions of the strength of concrete.' ASCE J. Struct. Div., 105(6), 1021-1037
  15. Mirza, S. A. and MacGregor, J. G. (1979). 'Variability of the mechanical properties of reinforcing bars.' ASCE J. Struct. Div., 105(5), 921-937
  16. Naaman, A. E. and Amnuayporn, S. (1982). 'Reliability of partially prestressed beams at serviceability limit states'. PCI Journal, 27, 66-85 https://doi.org/10.15554/pcij.11011982.66.85
  17. Reid, S. and Turkstra, C. (1980). Serviceability limit states-probabilistic description. report ST 80-1, McGill University, Montreal
  18. Reid, S. and Turkstra, C. (1981). Codified design for serviceability. Report ST 81-6, McGill University, Montreal
  19. RS Means. (2002). Building construction cost data. RS Means Co., Inc., Kingston, Massachusetts
  20. RS Means. (2002). Repair & remodeling cost data. RS Means Co., Inc., Kingston, Massachusetts
  21. Rosowsky, D. V., and Stewart, M. G. (2001). 'Probabilistic construction load model for multistory reinforced-concrete buildings.' ASCE J. Perf. Constr. Fac., 15(4), 145-152 https://doi.org/10.1061/(ASCE)0887-3828(2001)15:4(145)
  22. Stewart, M. G. (1996). 'Serviceability reliability analysis of reinforced concrete structures.' ASCE Journal of Structural Engineering, 122(7), 794-803 https://doi.org/10.1061/(ASCE)0733-9445(1996)122:7(794)
  23. Trost, H. (1967). 'Implications of the Superposition Principle in Creep and Relaxation Problems for Concrete and Prestressed Concrete.' Beton and Stahlbetonbau, West Berlin, Vol. 62, 18 pp. 230-238, 261-269
  24. Turkstra, C., and Reid, S. (1981). 'Probabilistic design for serviceability.' 3rd International Conference on Structural Safety and Reliability, Trondheim, Norway, 583-592