구리, 니켈, 코발트 혼합용액으로부터 침전법에 의한 구리의 분리

Precipitation of Cu as the sulphide from Sulphate solution containing Cu, Ni and Co

  • 박경호 (한국지질자원연구원 자원활용소재연구부) ;
  • 정선희 (한국지질자원연구원 자원활용소재연구부) ;
  • 박진태 (한국지질자원연구원 자원활용소재연구부) ;
  • 남철우 (한국지질자원연구원 자원활용소재연구부) ;
  • 김홍인 (한국지질자원연구원 자원활용소재연구부)
  • Park Kyung-Ho (Korea Institute of Geoscience Mineral Resources, Minerals and Materials Processing Division) ;
  • Jung Sun-Hee (Korea Institute of Geoscience Mineral Resources, Minerals and Materials Processing Division) ;
  • Park Jin-Tae (Korea Institute of Geoscience Mineral Resources, Minerals and Materials Processing Division) ;
  • Nam Chul-Woo (Korea Institute of Geoscience Mineral Resources, Minerals and Materials Processing Division) ;
  • Kim Hong-In (Korea Institute of Geoscience Mineral Resources, Minerals and Materials Processing Division)
  • 발행 : 2005.12.01

초록

구리, 니켈 그리고 코발트를 함유한 용액으로부터 구리를 선택적으로 분리하기 위하여 $Na_{2}S$를 첨가하여 구리를 CuS로 침전시키는 연구를 행하였다. 구리의 침전율은 용액의 pH가 높을수록, 첨가한 $Na_{2}S$의 양이 많을수록,농도가 낮을수록, 반응온도와 반응시간이 증가할수록 증가하였다. pH 1, $20\%\;Na_{2}S$ 첨가량이 구리의 3 당량비, 온도 $25^{\circ}C$ 그리고 반응시간 30분에서 구리의 침전율은 $94.1\%$이었으며 니켈과 코발트도 각각 $4.3\%$$4.5\%$가 침전되었다. 즉 일부 니켈과 코발트 이온이 같이 공침되기 때문에 정량적으로 구리만을 침전, 분리하는 것은 가능하지 않았다.

The selective sulphide precipitation of copper from sulphate solution containing nickel and cobalt was studied with adding $Na_{2}S$ solution. Precipitation efficiency of copper increased with raising pH of solution and increasing the amount of $Na_{2}S$ added and lowing its concentration. The increase in reaction time and temperature also improved the precipitation of copper. However, attempts to selectively precipitate copper met with limited success because of co-precipitation of nickel and cobalt. With adding $20\%$ $Na_{2}S$, 3 times equivalent of Cu, at pH 1.0 of solution, $25^{\circ}C$ and 30 minutes of reaction time, precipitation efficiencies of copper, nickel and cobalt were $94.1\%$, $4.3\%$ and $4.5\%$ respectively.

키워드

참고문헌

  1. Jackson, E., 1986: Hydrometallurgical extraction and reclamation, Jolm Wiley & Sons, New York, USA., pp. 147-153
  2. Habashi, F., 1970: Principles of extractive metallurgy, Vol. 2, Hydrometallurgy, Gordon and Breach Science Publishers, New York, USA., pp. 238-240
  3. El-Batouti, M., 2005: Removal of copper metal by cementation using a rotating iron cylinder, J. of Colloid and interface Science, 283(2), pp. 123-129 https://doi.org/10.1016/j.jcis.2004.08.185
  4. F. Valenzuela, et al., 2005: 'Removal of copper ions from a waste mine water by a liquid emulsion membrane method', Minerals Engineering, 18(1), pp. 33-40 https://doi.org/10.1016/j.mineng.2004.05.011
  5. Silva, J.E., et al., 2005: Solvent extraction applied to the recovery of heavy metals from galvanic sludge, Journal of Hazardous Materials, 120(1), pp. 113-118 https://doi.org/10.1016/j.jhazmat.2004.12.008
  6. Sahu, S.K., et al., 2004: Recovery of copper, nickel and cobalt from the leach liquor of a sulphide concentrate by solvent extraction, Minerals Engineering, 17(7), pp. 949-951 https://doi.org/10.1016/j.mineng.2004.03.009
  7. Mahmoud, M.H. and Barakat, M.A., 2001: Utilization of spent copper-pickle liquor for recovery of metal values, Renewable Energy, 23(3), pp. 651-662 https://doi.org/10.1016/S0960-1481(00)00142-7
  8. 박경호, 외 3인, 2004: 구리 니켈과 코발트를 함유한 황산용액으로부터 LIX84에 의한 구리의 용매추출, 대한금속재료학회지, 42(3), pp. 297-301
  9. Jandova, J., et al., 2005: Separation of copper and cobaltnickel sulphide concentrates during processing of manganese deep ocean nodules, Hydrometallurgy, 77, pp. 75-79 https://doi.org/10.1016/j.hydromet.2004.10.011
  10. Venkdtachalam, S., 1998, Hydrometaliurgy, Narosa Publishing House, New Delhi, India, p181
  11. Van Hille, R.Y., KA Peterson, and A.E. Lewis, 2005: Copper sulphide precipitation in a fluidised bed reactor; Chemical Engineering Science, 60, pp. 2571-2578 https://doi.org/10.1016/j.ces.2004.11.052
  12. Report on Treatment of mixed sulphate-chloride liquor containing Cu, Ni, Co, Fe, Mn and Zn, 2005, Regional Research Laboratory, India, p63
  13. 김종문, 1988: 일반야금학, 형설출판사, 서울, p198