참고문헌
- Chen, P. H. and Goldstein, R. J., 1992, 'Convective Transport Phenomena on the Suction Surface of a Turbine Blade Including the Influence of Secondary Flows Near the Endwall,' J. of Turbomachinery, Vol. 114, pp. 776-787 https://doi.org/10.1115/1.2928031
- Goldstein, R. J., Wang, H. P. and Jabbari, M. Y., 1994, 'The Influence of Secondary Flows near the Endwall and Boundary Layer Disturbance on Convective Transport from a Turbine Blade,' ASME Paper No. 94-GT-165
- Han, J. C., Zhang, L. and Ou, S., 1993, 'Influence of Unsteady Wake on Heat Transfer Coefficient From a Gas Turbine Blade,' J. of Heat Transfer, Vol. 115, pp. 904-911 https://doi.org/10.1115/1.2911386
- Arts, T., Duboue, J.-M. and Rollin, G., 1998, 'Aerothermal Performance Measurements and Analysis of a Two-dimensional High Turning Rotor Blade,' J. of Turbomachinery , Vol. 120, pp. 494-499 https://doi.org/10.1115/1.2841745
- Blair, M. F., 1994, 'An Experimental Study of Heat Transfer in a Large-scale Turbine Rotor Passage,' J. of Turbomachinery, Vol. 116, pp, 1-13 https://doi.org/10.1115/1.2928273
- Giel, P. W., Boyle, R. J. and Bunker, R., 2004, 'Measurements and Predictions of Heat Transfer on Rotor Blades in a Transonic Turbine Cascade,' J. of Turbomachinery, Vol. 126, pp. 122-129 https://doi.org/10.1115/1.1625691
- Chen, P. H. and Goldstein, R. J., 1992, 'Convective Transport Phenomena on the Suction Surface of a Turbine Blade Indud ing the Influence of Secondary Flows near the Endwall,' J. of Turbomachinery, Vol. 114, pp. 776-787 https://doi.org/10.1115/1.2928031
- Goldstein, R. J., Wang, H. P. and Jabbari, M. Y., 1994, 'The Influence of Secondary Flows Near the Endwall and Boundary Layer Disturbance on Convective Transport from a Turbine Blade,' ASME Paper No. 94-GT-165
- Hermanson, K., Kern, S., Picker, G. and Parneix, S., 2002, 'Predictions of External Heat Transfer for Turbine Vanes and Blades With Secondary Flowfields,' J. of Turbomachinery, Vol. 125, pp. 107-113
- Kwak, J. S. and Han, J. C., 2003, 'Heat Transfer Coefficients on the Squealer Tip and Near Squealer Tip Regions of a Gas Turbine Blade,' J. of Heat Transfer, Vol. 125, pp. 669-677 https://doi.org/10.1115/1.1571849
- Jin, P. and Goldstein, R. J., 'Local Massi Heat Transfer on Turbine Blade Near-Tip Surface,' ASME Paper No. GT-2002-30556
- 권현구, 이상우, 박병규, 2002, '큰 회전각을 가지는 터빈 블레이드 표면에서 나프탈렌 승화법을 이용한 열(물질) 전달계수 측정,' 대한기계학회 논문집B, 제26 권, 제6호, pp. 1077-1087
- 이상우, 권현구, 2004, '회전각이 큰 터빈 동익 누설유동 영역에서의 열(물질) 전달 특성,' 대한기계학회 논문집B, 제28권, 제5호, pp. 535-544
- 이동호, 조형희, 2005, '환형 캐스케이드 내 고정된 터빈 블레이드 및 슈리우드에서의 열(물질) 전달 특성 (I) - 블레이드 끝단 인접 표면,' 대한기계학회 논문집B, 제29권, 제4호, pp. 485-494
- 이동호, 조형희, 2005, '환형 캐스케이드 내 고정된 터빈 블레이드 및 슈라우드에서의 열/물질전달 특성(II) - 끝단 및 슈라우드,' 대한기계학회 논문집, 제29권, 제4호, pp. 495-503
- Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Kline, S. J. and McClinetock, F., 1953, 'Describing uncertainty in single sample experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
- Rhee, D. H., 2004, Local Heat/Mass Transfer Characteristics on Turbine Rotor and Shroud in a Low Speed Annular Cascade, Ph. D. Thesis, Yonsei University