참고문헌
- Measurement Group, 1985, 'Measurement of Residual Stresses by the Hole-Drilling Strain Gage Method,' Measurement Group Tech Note, TN-503-1, pp. 1-15
- Mathar, J., 1934, 'Determination of Initial Stresses by Measuring the Deformation Around Drilled Holes,' Trans. ASME, Iron & Steel, Vol. 56, pp. 249-254
- Kelsey, R. H., 1956, 'Measuring Non-uniform Residual Stresses by the Hole Drilling Method, Proceedings of SESA, Vol. 14, No. 1, pp. 181-194
- Rendler, N. J. and Vigness, I., 1966, 'Hole-drilling Strain-gage Method of Measuring Residual Stresses,' Experimental Mechanics, Vol. 6, No. 12, pp. 577-586 https://doi.org/10.1007/BF02326825
- Bathgate, R. G., 1968, 'Measurement of Non -Uniform Biaxial Residual Stresses by the Hole Drilling Method,' Strain, Vol. 4, No. 2, pp. 20-29 https://doi.org/10.1111/j.1475-1305.1968.tb01353.x
- Niku-Lary, A., Lu, J. and Flavenot, J. F., 1985, 'Measurement of Residual Stress Distribution by the Incremental Hole-drilling Method,' Experimental Mechanics, Vol. 25, No. 9, pp. 175-185 https://doi.org/10.1007/BF02328809
- Flaman, M. T. and Manning, B. H., 1985, 'Determination of Residual Stress Variation with Depth by the Hole-Drilling Method,' Experimental Mech- anics, Vol. 25, No. 9, pp. 205-207 https://doi.org/10.1007/BF02325088
- Schajer, G. S., 1988, 'Measurement of Non-uniform Residual Stresses Using the Hole-drilling Method,' Trans. ASME, J. Eng. Mat. and Tech., Vol. 110, pp. 338-349 https://doi.org/10.1115/1.3226059
- Wem, H, 1995, 'Measurement of Non-uniform Residual Stresses Using the Hole Drilling Method, a New Integral Formalism,' Strain, Vol. 32, No. 2, pp. 63-67
- Joo, J. W. and Park, C. K, 1998, 'A study on Residual Stress Analysis by Finite Element Method In Hole-Drilling Method,' Trans. of the KSME A, Vol 22, No. 2, pp. 268-277
- Kim, C., Seok, C. S. and Yang, W. H., 2000, 'Influence of the Hole Eccentricity in Residual Stresses Measurement by the Hole-drilling Method,' KSME A, Vol 24, No. 8, pp. 2059-2064
- Young, W. C., 1989, ROARK'S Formulas for Stress and Strain, 6th ed., McGraw-Hill, Sigapore, pp. 391-442