Abstract
In the past, explosives like dynamite was used to blast rock. However, today it is difficult to use explosives in urban blastinglike excavation for subway, building, and housing land. According to Korea Department of Construction and Transportation's proposal for blasting design manual and test blasting, from TYPE I blasting to TYPE IV blasting are recommended when we determine 0.3cm/sec(centisec) as a maximum allowable ground vibration with a distance between $25m\~120m$ from structures. This article was written to introduce one of TYPE I (reck blasting within 25m from structures) blasting method, Nano-Plasma blasting method. When Nano-Plasma blasting method is applied in urban blasting job, ground vibration (15m away from blasting point) is expected 0.1cm/sec, which is only half of a ground vibration when low ground vibration blasting method is applied. By this unique characteristic, Nano-Plasma blasting method is epochal urban blasting technique.
옛날에는 거대한 바위를 제거하기 위해서는 다이나마이트 등의 폭약을 사용하여 폭파개념의 발파를 해왔다. 그러나 도심지에서 지하철굴착, 건물기초굴착, 택지조성 등을 위해서는 폭파개념의 굴착은 곤란하다. 건설교통부 암발파설계 및 시험발파 잠정지침(안)에서는 0.3cm/sec(센티세크)를 진동안전기준치로 하였을 때 $25\~120m$ 이격거리에서는 TYPE I의 암파쇄굴착공법에서 TYPE IV의 진동제어중규모 발파공법을 권장하고 있다. 본 논문은 25m이내 지역의 최근접 암파쇄굴착공법(TYPE I)적용 최적공법인 나노프라즈마 공법을 소개하고자 한다. 나노프라즈마 공법을 적용하여 도심지 바위를 파쇄할 때 15m거리에서 기존의 미진동발파공법의 절반 진동수준인 0.1cm/sec가 예상되는 획기적인 공법이다.