DOI QR코드

DOI QR Code

Generation of 1.5 Gbps Pseudo-random Binary Sequence Optical Signals by Using a Gain Switched Fabry-Perot Semiconductor Laser

  • Kim Dae-Geun (Institute of Physics and Applied Physics, Yonsei University) ;
  • Woo Sae-Yoon (Institute of Physics and Applied Physics, Yonsei University) ;
  • Kim Dong-Kwan (Institute of Physics and Applied Physics, Yonsei University) ;
  • Hwang Taek-Yong (Institute of Physics and Applied Physics, Yonsei University) ;
  • Park Seung-Han (Institute of Physics and Applied Physics, Yonsei University) ;
  • Kim Dug Young (Department of Information and Communications, GIST)
  • Received : 2005.09.06
  • Published : 2005.09.01

Abstract

Recently, polymethyl methacrylate based plastic optical fibers (POFs) have attracted considerable attention as a potential medium for local area network (LAN) and home network applications. Since the POFs have very low optical loss at around 650mm, in particular, it becomes quite important to develop GHz transmitters operating at this wavelength for high bit rate optical transmission applications of the POFs. In this paper, we present generation of ${\geq}1.5 Gbps$ pseudo-random binary sequence optical signals by using a gain switched InGaA1P Fabry-Perot semiconductor laser with a high frequency filter, operating at 650mm, and the application of these signals to bandwidth measurement of POFs.

Keywords

References

  1. H. Jeong and K. Oh, 'Control of free spectral range of tong period fiber grating by cladding mode waveguide dispersion,' J. Opt. Soc. Korea, vol. 7, no. 2, pp. 89-96, 2003 https://doi.org/10.3807/JOSK.2003.7.2.089
  2. Y. G. Han, S. H. Kim, and S. B. Lee, 'Novel Raman fiber laser and fiber-optic sensors using multi-channel fiber gratings,' J. Opt. Soc. Korea, vol. 7, no. 2, pp. 97-101, 2003 https://doi.org/10.3807/JOSK.2003.7.2.097
  3. Andreas Weinert, Plastic Optical Fibers, (Siemens, Berlin, Germany, 1999), Chap. 2
  4. W. Daum, J. Krauser, P. E. Zamzow, and O. Ziemann, Polymer Optical Fibers for Data Communication, (Springer, Berlin, Germany, 2002), Chap. 3
  5. Y. Koike, E.Nihei, and Y. Ohtsuka, 'Low-loss, high bandwidth graded index plastic optical fiber,' Fiber Optics Magazine, vol. 12, no. 6, pp. 9-11, 1990
  6. S. Teshima, H. Munekuni, and S. Katsuta, 'Plastic optical fiber for automotive applications,' POF1992, Paris, France, pp. 44-48, 1992
  7. S. Taneichi and H. Kobayashi, 'Development of heat resistant POF cable for automotive application,' POF1995, Boston, USA, pp.111-113, 1995
  8. M. Kitazawa, K. Shimada, N. Saito, S. Takahashi, and K. Yagi, 'Mechanical and optical performance of a new PMMA-based plastic fiber,' SPIE, vol.1799, pp. 30-37, 1992 https://doi.org/10.1117/12.141361
  9. S. Techima and H. Munekuni, 'Multi-core POF for high-speed data transmission,' POF1998, Berlin, Germany, pp. 135-142, 1998
  10. K. Y. Lau, 'Gain switching of semiconductor injection lasers,' Appl. Phys. Lett., vol. 52, no. 4, pp. 257-259, 1988 https://doi.org/10.1063/1.99486
  11. R. Paiella, F. Capasso, C. Gmachl, C. G. Bethea, D. L. Sivco, A. L. Hutchinson, and A. Y. Cho, LEOS'99, 12th Annual Meeting, vol. 1, no. 11, 1999
  12. S. D. Cho, C. H. Lee, and S. Y. Shin, Photon. Technol. Lett., vol.9, no.7, pp. 782-784, 1999 https://doi.org/10.1109/68.769706

Cited by

  1. Development and Evaluation of an Electron Beam Source for Microscopy and Its Applications vol.14, pp.2, 2010, https://doi.org/10.3807/JOSK.2010.14.2.127
  2. Nondestructive Optical Measurement of Refractive-index Profile of Graded-index Lenses vol.13, pp.4, 2009, https://doi.org/10.3807/JOSK.2009.13.4.468