참고문헌
- Leighton, D. E. and Lee, D., 'The Effect of Tooling Temperature on the Formability of Sheet Steel,' Journal of MPT, Vol. 45, pp. 577 - 582, 1994
- Yoshida, T., Shidoda, T. and Sano, A., 'The Effect of Increase of Tool Temperature on Sheet Steel Forming,' Mold Technology, Vol. 11, No.8, pp. 28 - 29, 1996
- Song, K. H., Lee, J. D. and Seo, D. G., 'Friction Characteristic of Sheets for the Die Temperature and the Treating Conditions,' Transactions of Materials Processing, Vol. 8, No.3, pp. 245 - 251, 1999
- Lee, J. D., Choi, C. S., Choi, Y. C., Kim, H. Y. and Seo, D. G., 'A Study on the Warm Deep Drawing Ability of Sheets on Cr-Coating Die,' Transactions of Materials Processing, Vol. 9, No.2, pp. 186 - 192, 1999
- Choi, C. S., Choi, Y. C., Oh, Y. K., Lee, J. W. and Lee, H. S., 'Effect of Cold Forming Method on Drawability in Trunk Floor Panel,' Transactions of Materials Processing, Vol. 10, No.2, pp. 123 - 129, 2001
- Thomas, W., Oenoki, T. and Altan, T., 'Process Simulation in Stamping - Recent Applications for Product and Process Design,' Journal of MPT, Vol. 98, pp. 232 - 243, 2000 https://doi.org/10.1016/S0924-0136(99)00204-6
- Takuda, H., Mori, K., Masuda, I., Abe, Y. and Matsuo, M., 'Finite Element Simulation of Warm Deep Drawing of Aluminium Alloy Sheet When Accounting for Heat Conduction,' Journal of MPT, Vol. 120, pp. 412 - 418, 2002 https://doi.org/10.1016/S0924-0136(01)01180-3
- Ko, Y. H., Kim, B. M. and Kim, D. H., 'Prediction of Temperature Increase during Continuous Stamping Process by FE-simulation,' Proceedings of the KSPE Autumn Annual Meeting, pp. 974 - 977, 2003
- Kim, D. H., Lee, J. M., Ko, Y. H., Cha, H. G. and Kim, B. M., 'Development of Technique to Improve the Formability of the Rear Floor in Series Stamping Process,' Proceedings of the KSPE Autumn Annual Meeting, pp. 25 - 28, 2004
- Kim, D. H., Kim, B. M., Lee, Y. and Min, B. H., 'Friction Characteristics for Surface Finish and the Stoning Direction of Stoning Dies,' Proc. Instn. Mech. Engrs. Part B: J. Engineering Manufacture, Vol. 216, pp. 531 - 542, 2002
- Ohwue, T., Takechi, H. and Furuno, Y., 'Deep Drawability of Square Shells in Warm Working Condition,' Journal of JSTP, Vol. 28, No. 318, pp. 706 - 711, 1987
- Ohwue, T., Takechi, H. and Furuno, Y., 'Temperature Dependence of Tensile Properties Drawability of Steel Sheets in Warm Working Condition,' Journal of JSTP, Vol. 28, No. 314, pp. 225 - 231, 1987
- Basic Formability, Forming Technology INC., 1075 North Service Road West, Unit 6, Oakville, 1996
- Ike, H., 'Tribology of Galvanized Steel Sheet,' Press & Mold Technology, Vol. 11, pp. 100 - 104, 1992
- Kim, D. H. and Kim, B. M., 'Estimation of Die Service Life for Die Cooling Method in Hot Forging,' Transaction of Materials Processing, Vol. 12, No.4, pp. 408- 403, 2003 https://doi.org/10.5228/KSPP.2003.12.4.408
- www.matweb.com