Abstract
A seismic refraction study in estimation of depth to the bedrock demonstrates that 1) the average velocity in the medium is about 250 m/s in the surface layer (< 4 m), 2,500 m/s in the weathered formation, and greater than 3,000 m/s in the bedrock, 2) the depth to the deepest reflector assumed to be the bedrock is about 17 m; however, according to the cores collected in a borehole in study area, the bedrock (granite) occurred at depth 25 m, 3) according to the density and velocity logging, at depth 17 m, a measurable velocity and density increase are observed, and 4) the velocity of the weathered formation is relatively high and therefore, the acquisition offsets ($70{\sim}80m$) are turned out not to be long enough to record the refracted signal from the bedrock at depth 25 m as first arrivals.
기반암 심도측정을 위한 탄성파 굴절법 탐사자료 분석 결과 다음과 같은 사실을 확인 하였다. 1) 매질의 탄성파 속도는 표토층(<4 m)에서는 250 m/s, 충적층(4< < 17 m)은 2,500 m/s, 암반은 3,000 m/s 이상이다, 2) 탄성파 탐사에서 표출된 최하부 굴절면의 심도는 최대 17 m 정도로서 이는 3) 속도 및 밀도 검층 자료에서도 동일하게 심도 17 m 부근에서 속도 및 밀도의 증가가 관측된다. 반면 시추조사에 의하면 25 m 이하에서 암반(화강암)이 나타나며 결과적으로 굴절법 탄성파 탐사 및 검층기록과 시추조사 결과에서의 기반암 깊이가 서로 일치하지 않는다. 이러한 원인은 본 조사지역이 충적층의 속도가 상당히 커서 본 탐사기록의 송신원-수진점 거리($70{\sim}80m$)는 심도 25 m의 기반암 굴절파를 초동으로 기록하기 위해서는 충분하지 못한 것으로 분석하였다.