초록
여러 제어기 중에서 PLC가 공장자동화 설계에서 가장 많이 사용되고 있으며, PLC 언어에 대한 연구도 활발히 이루어지고 있다. 본 논문에서는 PLC를 사용한 공장자동화 설계에서 입력기기의 수가 증가되었을 때 입력을 확장하는 인코딩 모듈을 제안한다. 기본 베이스에 입력 유닛을 더 이상 장착할 수 없는 상태에서 입력 점수를 $2\~3$점 확장하고자 한다면, 증설 베이스와 파워서플라이, 증설케이블 및 출력 유닛을 별도로 장착하여야 한다. 그러면 비용이 상당히 추가되어야 한다. 본 논문에서는 입력을 소량을 확장할 수 있는 입력 인코딩 모듈을 제안하고, 시뮬레이션을 통해 그의 타당성을 확인하였다.
Programmable Logic Controller(PLC) is the most widely utilized among many sorts of existing controller for the design of factory automation control system, and study about a PLC language is peformed actively. In this paper, we proposed the encoding module that we increase input points when increased of the input machine which is going to control it in the FA design that used PLC. Input point is going to be extended with 2-3 points in the state that cannot equip input unit in basic base any more. Then an extension base, a power supply, an extension cable and an output nit must be equipped particularly. Then a cost must be added very much. This paper proposed the encoding module which extended an input in a small quantity, and we confirmed a feasibility through a simulation.