Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on Measurement Uncertainty of 3-dimensional Coordinate Measuring Machine used for Inspection of Precision Machined parts

정밀가공 부품 검사에 사용되는 3차원측정기의 측정불확도 연구

  • 이갑조 (조선대학교 대학원 기계공학과) ;
  • 오상록 (조선대학교 대학원 기계공학과) ;
  • 김종관 (조선대학교 기계공학과)
  • Published : 2005.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The machining Parts must be Produced within the specification of drawing and those will be able to meet faction and efficiency. At that time, it is very important not only precision machine and machining technique but also the measurement technique. So, the improvement of measurement technique is to be joined together at once with improvement of machining technique. Finally, the quality and value of the parts are decided by precision measurement. This paper aims to study on the measurement uncertainty when the machined parts are inspected with 3-dimensional coordinate measuring machine. The objectives remove an error of measurement and remove a quality of mass products.

Keywords

References

  1. ANSI Y14.5M, 1982, Dimensioning and Tolerancing, American National Standard, pp. 53-89
  2. Jung M. S., 1985, Theory of Errors in dimensional Measurements 2nd Edition, KRISS, pp. 1-22
  3. Eom T. B., 2002, Standard Calibration Procedure of Coordinate Measuring Machines, KASTO, pp. 9-37
  4. Lim J. S., and Yang S. H., 2000, Standard Calibration Procedure of Coordinate Measuring Machines, KASTO, pp. 14-42
  5. Jung M. S., 1999, Guide to the Expression of Uncertainty in Measurement, KRISS, pp. 17-40
  6. EA-4/02, 1999, Expression of the Uncertainty of Measurement in Calibration, European co-operation for Accreditation, pp. 5-13
  7. KOLAS-SG-101, 2002, Guidelines for Evaluating and Expressing the Uncertainty of Measurement Results, KOLAS, pp. 5-12
  8. Lee G. T., Lee D. J., Yoon Y. S., Park H. C. ,and Oh, J. M., 2003, 'A Study on Measurement Uncertainty of Theodolite System,' Journal of the KSMTE Spring Conference 2003, No. 1, pp. 229-233
  9. ISO/IEC 17025, 1999, General Requirements for the Competence of Testing and Calibration Laboratories, pp. 25-33