A STUDY ON THE COLOR STABILITY OF PORCELAIN REPAIR RESINS

도재 수리용 레진의 색안정성에 관한 연구

  • Kim Nan-Young (Department of Prosthodontics, School of Dentistry, Wonkwang University) ;
  • Jin Tai-Ho (Department of Prosthodontics, School of Dentistry, Wonkwang University)
  • 김난영 (원광대학교 치과대학 치과보철학교실) ;
  • 진태호 (원광대학교 치과대학 치과보철학교실)
  • Published : 2004.04.01

Abstract

Statement of problem : Porcelain restorations are widely used in restorative dentistry with a high degree of general success. However, porcelain is brittle and may fracture intraorally. Sometimes a repair may be attempted using composite resin and bonding system available. Color stability of porcelain repair resins affects esthetics and prognosis of prosthesis, so that provides important criteria for the choice of porcelain repair resins. Purpose : The purpose of this study was to investigate the color stability of composite resins used widely as porcelain repair system. Materials and method : Composite resins used for this study were Carisma(Kulzer, Germany), Tetric ceram(Ivoclar, Liechtenstein), Filtek Z250(3M, USA), and Arabesk Top(VOCO, Germany). Thirty disc-shaped specimens($10{\times}2mm$) were fabricated from each composite resin. Color changes of specimens after treatment using thermocycling system(KD-TCS30, Kwang-duk F.A. Korea) and after immersion in methylene blue(0.05% by Wt) were measured with colorimeter(Model Tc-6Fx, Tokyo Denshoku Co.) and obtained data were analyzed. Results and Conclusion: The results obtained from this study were as fo11ows. 1. The color change of Filtek Z250 was lesser than those of Tetric ceram and Arabesk Top after thermocycling (12000 times). 2. All of the composite resins in this study showed increase of color change according to increase of thermocycling frequency. 3. After treatment with methylene blue, the color change of Arabesk Top was greater than those of Carisma and Tetric ceram, and Tetric ceram was more stable than others.

Keywords

References

  1. Mark AL. Wayne WB. Approaches for intraoral repair of ceramic restorations. Compendium 2000:21 :635-9
  2. Dent RJ. Repair of porcelain fused to metal restorations. J Prosthet Dent 1979: 41:661-7
  3. Bowen RL. Properties of a silane reinforced polymer for dental restoration, J Am Dent Associ 1963:66:57-64
  4. Barreto MT, Bottaro BF. A practical approach to porcelain repair. J Prosthet Dent 1982:61 :349-51
  5. Newburg R. Pameijer CH. Composite resins bonded to porcelain with silane solution. J Am Dent Associ 1978: 96: 288-91
  6. Highton RM, Caputo AA, Matys J. Effectiveness of porcelain repair systems. J Prosthet Dent 1979:42:292-4
  7. Bello JA, Myers ML. Jarvis RH. Bond strength and microleakage of porcelain repair materials. J Prosthet Dent 1985: 54:788-91
  8. Choi JW, Han DH, Jeong CM. A comparison of the shear bond strength between three porcelain repair systems and fractured surfaces of porcelain-fused-to-metal restorations. J Korean Acad Prosthodont 1990: 28: 147-63
  9. Chadwick RG, Mason AG, Sharp W. Attempted evaluation of three porcelain repair system. J Oral Rehabil 1998: 25:610-5
  10. Leibrock A, Degenhart M, Behr M, Rosentritt M, Handel G. In vitro study of the effect of thermo- and load-cycling on the bond strength of porcelain repair systerns. J Oral rehabil 1999: 26: 130-7
  11. Hisamatsu N, Atsuta M. Matsumura H. Effect of silane primers and unfilled resin bonding agents on repair bond strength of a prosthodontic microfilled composite. J Oral rehabil 2002: 29: 633-8
  12. Mclean JW. The science and art of dental ceramics : vol 1. The nature of dental ceramics and their clinical use. Quintessence. Chicago. 1979
  13. Asmussen E. Factors affecting the color stability of restorative resins. Acta Odont Scand 1983 :41: 11-8
  14. Germain HS. Swatz ML. Phillips RW, Moore BK. Roberts TA. Properties of microfilled composite resins as influenced by filer content. J Dent Res 1985:64:155-60
  15. Oysaed H. Ruyter IE. Water sorption and filler characteristics of composites for use in posterior teeth. J Dent Res 1986:65: 1315-8 https://doi.org/10.1177/00220345860650110601
  16. Ameye C, Lambrechts P. Vanherle G. Conventional and microfilled composite resins. Part I. Color stability and margin adaptation. J Prosthet Dent 1981 :46: 623-30
  17. Venz S. Antonucci JM. Effect of photoac-celerators on curing and discoloraton of comporites. Dent Mater 1987:3:244-6
  18. Powers JM. Dennison JB, Andrew K. Color stability of restorative resins under accelerated aging. J Dent Res 1978:57:964-70
  19. Ruyter IE. Nilner K. Moller B. Color stability of dental composite resin materials for crown and bridge veneers. Dent Mater 1987: 3: 246-51
  20. Gross MD, Moser JB. A colorimetric study of coffee and tea staining of four composite resins. J Oral Rehabil 1977:4:311-22
  21. Urn CM, Ruyter IE. Staining of resin-based veneering materials with coffe and tea. Quint Int 1991 :22:377-86
  22. Raptis CN. Powers JM. Fan PL. Yu R. Staining of composite resins by cigarette smoke. J Oral Rehabil 1982:9:367-71 https://doi.org/10.1111/j.1365-2842.1982.tb01025.x
  23. Brauer GM. Color changes of composites on exposure to various energy sources. Dent Mater 1988:4:55-9
  24. Seghi RR. Spectrophotometric analysis of color differences between porcelain systerns. J Prosthet Dent 1986: 56: 35-4
  25. Seghi RR. Effects of instrument-measuring geometry on colorimetric assessments of dental porcelains. J Dent Res 1990:69:1180-3
  26. Eldiwany M. Friedl KH. Powers JM. Color stability of light-cured and post-cured composites. Am J Dent 1995 :8: 179-81
  27. O' Brien WJ. Groh CL. Boenke KM. A new. small color difference equation for dental shade. J Dent Res 1990:69:1762-4
  28. Wozniak WT. Proposed guidelines for the acceptance program for dental shade guides. American dental association. Chicago. pp.1-2. 1987
  29. Cook WD. Chong MP. Color stability and visual perception of dimethacrylate based dental composite resins. Biomaterials 1985:6:257-64
  30. Ferracane JL, Moser JB. Greener EH. Ultraviolet light induced yellowing of dental restorative resins. J Prosthet Dent 1985:54:483-7
  31. Powers JM, Fan PL. Color stability and aging of plastic veneering materials. J Dent Res 1981:60: 1692-6
  32. Powers JM. Bakurat MM. Ogura H. Color and optical properties of posterior composites under accelerated aging. Dent Mater 1985:1:62-7
  33. Powers JM. Bakus ER, Goldberg AJ. In vit-ro color change of posterior composites. Dent Mater 1988 :4: 151-4
  34. Satou N. Khan AM, Matsumae I, Satou J, Shintani H. In vitro color change of composite-based resins. Dent Mater 1989: 5:384-7
  35. Wozniak WT, Muller TP, Silverman R, Moser JB. Photographic assessment of color changes in cold and heat-cure resins. J Oral Rehabil 1981:8: 333-9
  36. Dietschi D, Campanile G, Holz J, Meyer JM. Comparison of the color stability of ten new-generation composites : an in vitro study. Dent Mater 1994: 10:353-62
  37. Pollack BK & Blitzer MH. Discoloration in composite and microfill resins. Gen Dent 1984:130-3
  38. Cooley RL, Sandoval VA, Barnwell SE. Fluoride release and color stability of a fluoride-containing composite resin. Quintessence Int 1988: 19:899-904
  39. Stober T, Clide H. Lenz P. Color stability of highly filled composite resin materials for facings. Dent Mater 2001:17:87-94
  40. Asmussen E. Factors affecting the color stability of restorative resins. Acta Odont Scand 1983 ;41: 11-8 https://doi.org/10.3109/00016358309162298
  41. Craig RG. Chemistry, composition. and properties of composite resin. Dent Clin North Am 1981:25:219-39