References
- Terumasa Hisakado, Kentarou Miyazaki, Akiyoshi Kameta and Satoru Negishi, 2000, 'Effects of surface roughness of roll metal pins on their friction and wear characteristics', Wear239, pp. 69-76
- Alfred Zmitrowicz, 1995, 'Constitutive models for anisotropic frictional heat', Int. J. Heat Mass Transfer, Vol.38, pp. 563-574 https://doi.org/10.1016/0017-9310(95)90651-D
- R.C. Parker and P.R. Marshall, 1948, 'The measurement of the temperature of sliding surfaces, with particular reference to railway brake blocks', Proc. Inst. Mech. Engrs 158, pp. 209-229 https://doi.org/10.1243/PIME_PROC_1948_158_026_02
- M. Teodorrescu, G. Frumusanu, and L. Teodorescu, 1996, 'Study about the nature of the friction-lubrication process during the deep drawing of thin sheets', 19th IDDRG Biennial Congress, pp.541-546
- R.J.J.M. Sniekers and H.A.A. Smits, 1997, 'Experimental set-up and data processing of the radial strip-drawing friction test', Journal of Materials Processing Technology 66, pp. 216-223 https://doi.org/10.1016/S0924-0136(96)02526-5
- M. Jonasson, A. Whilborg and L. Gunnarsson, 1998, 'Analysis of surface topography changes in steel sheet strips during bending under tension frictiontest', Int.J.Mach. Tools Manufact., Vol.38, NO.5-6, pp.459-467 https://doi.org/10.1016/S0890-6955(97)00090-4
- S.R. Bhonsel and K.J. Weinmann, 1990, 'The Significance of the workpiece sample in the strip-tension friction test', Transactions of NAMRI/SME, pp. 46-51
- J.M. Lanzon, M.J. Cardew-Hall and P.D. Hodgson, 1998, 'Characterising frictional behaviour in sheet metal forming', Journal of Materials Processing Technology 80~81, pp. 251-256 https://doi.org/10.1016/S0924-0136(98)00110-1
- X.J. Wang, J.L. Duncan and M.L. Devenpeck, 1983, 'Punch friction tests for sheet metal forming', American Society for Metals, Vol.3, NO.1, pp.3-11
- 김영석, 박기철, 1991, 'Zn-Ni계 합금도금강판의 마찰특성에 관한 연구', 대한기계학회 논문집, 15권6호, pp. 1807-1818
- 김영석, 남재복, 최원집, 1990, '자동차용 표면처리 강판의 마찰특성에 관한 연구, 대한기계학회 논문집, 14권6호, pp. 1474-1486
- 서대교, 이재동, 송광헌, 최이천, 1999, '금형의 온도와 처리상태에 따른 판재의 마찰 특성', 한국소성가공학회지, 8권3호, pp. 245-251
- 권재욱, 김인수, 1992, '각종 도금강판의 신장성형시 마찰계수 측정', 한국소성가공학회지, 1권1호, pp. 75-86
- S.S. Han, 1997, 'Influence of tool geometry of friction behavior in sheet metal forming', Journal of Material Processing Technology, Vol.63, pp. 129-133 https://doi.org/10.1016/S0924-0136(96)02612-X
- 이봉현, 금영탁, 2002, '박판성형 해석용 마찰 모델 (1부: 실험)', 한국소성가공학회지 제11권 제4호, pp. 349-354
- 김준보, 금영탁, 1996, '굽힘효과를 고려한 자동차 판넬 성형 공정의 2차원 유한 요소 해석', 한국자동차공학회논문집 제4권 제6호, pp. 27-38