Journal of Korea Foundry Society (한국주조공학회지)

Korea Foundry Society (한국주조공학회)
권호 표지

Filling and Solidification Analysis for the Casting Process of Cylinder Liner

실린더 라이너 주조공정에 대한 충전 및 응고해석

  • Kim, Jung-Hoon (Research & Development Center, HSD Engine Co., Ltd.) ;
  • Kim, Chang-Hee (Research & Development Center, HSD Engine Co., Ltd.)
  • Published : 2004.08.20
Download PDF
⟨ Previous Next ⟩

Abstract

Computer simulation of mold filling and solidification has been performed in order to analyze the flow and solidification phenomena for the casting process of cylinder liner. The simulation result of mold filling shows that the molten metal flows into the mold in stable without scattering. The simulation results of solidification indicate that the last solidified area is located in the feeder. The temperature variation in casting is measured in actual casting and the result is compared with calculation result.

Keywords

References

  1. M. Salcudean and Z. Abdullah: Proc. of the 8th Int. Heat Transfer Conf., 'Numerical Simulation of Casting Processes', 2, (1986) 459-464
  2. D. D. Goettsch and J. A. Dantzig: Metall. and Mater. Trans., 'Modeling Micro- structure Development in Gray Cast Irons', 25A(5), (1994) 1063-1079
  3. N. P. Gray and G. C. Coyle: Proc. of the 7th Conf. on Modeling of Casting, Welding and Adv. Solidification Proc., 'Verification of Defect and Temperature Predictions for Commercial Software Using a Variable Geometry T-plate Casting', (1995) 849-856
  4. J. A. Spim and A. Garcia: Mater. Sci. Eng. (A). 'Numerical Analysis of Solidification ofComplex Shaped Bodies: Coupling of Mesh Elements of Different Geometries', 277, (2000) 198-205 https://doi.org/10.1016/S0921-5093(99)00529-8
  5. S.-B. Kim and c.-P. Hong: J. Kor. Foundrymen's Soc., 'Heat and Fluid Analyses and It's Application to the Design of the Casting Process', 13, (1993) 131-145
  6. Y.-C. Lee and J.-K. Choi : J. Kor. Foundrymen's Soc., 'The Practical Examples of Removal of Casting Defects by Computer Simulation', 18, (1998) 124-131
  7. S.-K. Yu : Kor. J. Mater. Res., 'Solidification Simulation of Gray Iron Sheave Product with Consideration of Graphite Precipitation', 9, (1999) 139-143