Journal of Korea Foundry Society (한국주조공학회지)

Korea Foundry Society (한국주조공학회)
권호 표지

Effect of Casting Variable on the Fluidity of High-Silicon Heat-Resistant Ductile Cast Iron Melt

고규소 내열 구상 흑연 주철 용탕의 유동도에 미치는 주조 변수의 영향

  • 조웅제 (영남대학교 대학원) ;
  • 권해욱 (영남대학교 재료금속공학부) ;
  • 서갑성 (대한특수금속주식회사)
  • Published : 2004.08.20
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of casting variable on the fluidity of high silicon, especially hypereutectic, heat-resistant ductile cast iron melt was investigated. When pouring temperature and silicon content were constant, that was increased with carbon content. When the pouring temperature and carbon content were constant, that also increased with the silicon content. Even though these results were thought to be caused by the high heat of fusion evolved during the crystallization of proeutectic graphite nodules, further research seemed to be needed. The fluidity for taller sprue was higher than that for smaller one.

Keywords

References

  1. J. R. Davis et al. ed. : ASM International, 'Cast Irons', (1996), 123
  2. M. T. Rowley ed. : AFS, 'International Atlas of Casting Defects', (1993),154-161
  3. G. W. Anselman et al. ed. : AFS, 'Analysis of Casting Defects', 4th ed., (1974), 74-79
  4. L. F. Porter and P. C. Rosenthal: Trans. AFS, vol. 60, (1952)
  5. R. W. Heine, C. R. Loper, Jr. and P. C. Rosenthal: McGrawHill, 'Principles of Metal Casting', 2nd. ed., (1967)
  6. M. C. Flemings, E. Niyama and H. F. Taylor: Trans. AFS, vol. 69, (1961) 625-635
  7. C. J. Cooksey, V. Kondic and J. Wilcock : The British Foundryman, Sep. (1959) 381
  8. C. R. Loper, Jr. : Trans. AFS, vol. 100, (1992) 533-538
  9. J. M. Kim: M. S. Thesis, University of Wisconsin Madison, 'Effects of Solidification Mechanism on the Fluidity of AISi Casting Alloys', (1994)
  10. M.J. Berger and C. Locke: Foundry, vol. 79, Feb.(l95 I) 112.
  11. J. F. Wallace and E. B. Evans: Trans. AFS, vol. 65, (1957) 267