DOI QR코드

DOI QR Code

Sway of semi-rigid steel frames - Part 1: Regular frames

  • Ashraf, M. (Department of Civil and Environmental Engineering, Imperial College London) ;
  • Nethercot, D.A. (Department of Civil and Environmental Engineering, Imperial College London) ;
  • Ahmed, B. (Department of Civil Engineering, Bangladesh University of Engineering and Technology)
  • 투고 : 2004.03.27
  • 심사 : 2004.10.01
  • 발행 : 2004.10.25

초록

Lateral sway is most likely to control the design of semi-rigid steel frames where the frame arrangements do not include any form of bracing. This paper investigates the sway behaviour of semi-rigid regular steel frames i.e., frames having the same arrangement of beam and column sections at all levels, and hence proposes some design charts for the prediction of sway that eliminate the need for doing any numerical modelling. Schueller's equation has also been modified to incorporate connection flexibility in addition to its original rigid frame considerations. All the proposed methods have been validated using results obtained from numerical analysis.

키워드

참고문헌

  1. Ahmed, B. (1996),"Numerical modelling of connections in composite frames", Ph.D. Thesis, Department of Civil Engineering, University of Nottingham, UK.
  2. Ahsan, R. (1997),"Semi-rigid joint action in sway steel frames", M.Sc. Thesis, Department of Civil Engineering, Bangladesh University of Engineering and Technology, Dhaka.
  3. Ammerman, D.J. and Leon, R.T (1990),"Unbraced frames with semi-rigid composite connections", Engineering Journal/American Institute of Steel Construction, First quarter 12-21.
  4. ANSYS (1998), Basic Analysis Procedure Guide, Elements Reference Vol. 1 & 2, Commands Reference Vol. 1 & 2 and Structural Analysis Guide, Version 5.4, ANSYS, Inc., Global Headquarters, Southpointe, 275 Technology Drive, Canonsburg, PA 15317.
  5. Ashraf, M. (2001),"Sway estimation of semi-rigid steel frames", M.Sc. Thesis, Department of Civil Engineering, Bangladesh University of Engineering and Technology, Dhaka 1000, Bangladesh.
  6. Ashraf, M., Nethercot, D.A. and Ahmed, B.,"A simplified method to predict sway of rigid building frames", (Submitted to Computers and Structures)
  7. Ashraf, M., Nethercot, D.A. and Ahmed, B.,"Effect of column base flexibility on sway" (in preparation)
  8. Ashraf, M., Nethercot, D.A. and Ahmed, B.,"Simplified connection stiffness from non-linear moment-rotation relationship of connections" (in preparation)
  9. Bangladesh National Building Code (1993), Housing and Building Research Institute, 1st Edition, Dhaka.
  10. Chan, S.L. and Chui, P.P.T. (2000), Nonlinear Static and Cyclic Analysis of Steel Frames with Semi-Rigid Connections, Elsevier, Amsterdam.
  11. Chen, W.F., Goto, Y. and Liew, J.Y.R. (1996), Stability Design of Semi-Rigid Frames, John Willey & Sons, New York.
  12. Colson, A. and Bjorhovde, R. (1991),"Connection moment - rotation curves for semi - rigid frame design", Proc. of the Second Int. Workshop on Connections in Steel Structures, 10-12 April, Pennsylvania, USA, 282-294.
  13. Deirlein, G.G. (1991),"An inelastic analysis and design system for steel frames with partially restrained connections", Proc. of the Second Int. Workshop on Connections in Steel Structures, 10-12 April, Pennsylvania, USA, 408-415.
  14. Huang, J. and Morris, G. (1991),"Analysis of flexibly connected frames under non - proportional loading", Proc. of the Second Int. Workshop on Connections in Steel Structures, 10-12 April, Pennsylvania, USA, 282-294.
  15. Johnson, N.D. and Walpole, W.R. (1981),"Bolted end-plate beam-to-column connections under earthquake type loading", Research Report 81-7, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
  16. Li, T.Q., Choo, B.S. and Nethercot, D.A. (1995),"Connection element method for the analysis of semi-rigid frames", J. Constructional Steel Research, 32, 143-171. https://doi.org/10.1016/0143-974X(95)93170-9
  17. Lui, E.M. and Chen, W.F. (1988),"Behaviour of braced and unbraced semi-rigid frames", Int. J. Solids Struct., 24, 893-913. https://doi.org/10.1016/0020-7683(88)90040-6
  18. Schueller, W. (1977), High-Rise Building Structures, John Willey and Sons.
  19. Ye, Mei-xin, Nethercot, D.A. and Li, T.Q. (1996),"Non linear finite element analysis of composite frames", Proc. of the Institution of Civil Engineers, Structures & Buildings, 116, 244-247. https://doi.org/10.1680/istbu.1996.28291