대한전기학회논문지:전기기기및에너지변환시스템부문B (The Transactions of the Korean Institute of Electrical Engineers B)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

성능 개선을 위한 자속 역전식 기기의 설계 기법

A Novel Design Technique to Improve the Performance of Flux-Reversal Machine

  • 발행 : 2004.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Flux-reversal machine (FRM) is a new doubly-salient stator-permanent magnet (PM) machine with flux linkage reversal in the stator concentrated windings. It can operate in both motoring and generating modes. In this paper, a novel design technique to improve the performance of FRM is proposed. Proposed techniques have a new stator winding and a magnet arrangement method. The stator and rotor shape with a concave type and a flux barrier are also proposed. According to the experimental results, it is shown that the proposed FRM have an improved performance.

키워드

참고문헌

  1. 소형 모우터 기술조사위원회, '소형 모우터 기술 현황,' 대한전기학회, 1995
  2. 리럭턴스모터 조사전문위원회, '스윗치드 리럭턴스 모터의 기술 동향,' 대한전기학회, 1994
  3. P. J. Lawrenson, J. M. Stephenson, P. T. Blenkinsop, J. Corda, and N. N. Fulton, 'Variable speed switched reluctance motors,' Proc. IEE, vol. 127, pt. B, pp. 253-265, July 1980
  4. R. P. Deodhar, S. Andersson, I. Boldea, and T. J. E. Miller, 'The flux-reversal machine: a new brushless doubly-salient permanent-magnet machine,' IEEE Ind. Applicat., vol. 33, no. 4, pp. 925-934, July/August 1997 https://doi.org/10.1109/28.605734
  5. C. X. Wang, I. Boldea, and S. A. Nasar, 'Characterization of three phase flux reversal machine as an automotive generator,' IEEE Trans. Energy Conversion, vol. 16, no. 1, March 2001 https://doi.org/10.1109/60.911407
  6. C. Wang, S. A. Nasar, and I. Boldea, 'Three-phase flux reversal machine (FRM),' IEE Proceedings Electric Power Applications, vol. 146, no 2, pp. 139-146, March 1999 https://doi.org/10.1049/ip-epa:19990114
  7. 이상엽, 곽상엽, 김재광, 정현교, '고정 투자율법을 적용한 매입형 영구 자석 전동기의 특성 해석,' 대한전기학회 하계학술대회 논문집, pp. 941-943, 2004
  8. Gyu-Hong Kang, Jung-Pyo Hong, Gyu-Tak Kim, Jung-Woo Park. 'Improved parameters modelling of Interior Permanent Magnet Synchronous Motor based on Finite Element Analysis', IEEE Trans. on MAGNETICS, vol. 36, no. 4, pp. 1867-1870, July 2000 https://doi.org/10.1109/20.877809
  9. K. Yamazaki, 'Harmonic copper and iron losses calculation of induction motor using nonlinear time-stepping finite element method,' International Conference IEMDC 2001, 2001, CD-ROM https://doi.org/10.1109/IEMDC.2001.939364
  10. J. G. Zhu and V. S. Ramsden, 'Improved formulations for rotational core losses in rotating electrical machines,' IEEE Trans. Magn., vol. 34, no. 4, pp, 2234-2242, 1998 https://doi.org/10.1109/20.703861
  11. N. Sadowski, M. Lajoie-Mazene, J. P. A. Bastos, M. V. Ferreira da Luz, and P. Kuo-Peng, 'Evaluation and analysis of iron losses in electrical machines using the rain-flow method,' IEEE Trans. Magn., vol. 36, no. 4, pp. 1923-1926, July 2000 https://doi.org/10.1109/20.877823
  12. K. Yamazaki and Y. Haruishi, 'Stray load loss analysis of induction motor-comparison of measurement due to IEEE standard 112 and direct calculation by finite-element method,' IEEE Ind. Applicat., vol. 40, no. 2, pp. 543-549, March/April 2004 https://doi.org/10.1109/TIA.2004.824509