대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제28권10호
  • /
  • Pages.1612-1620
  • /
  • 2004
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

원자력 배관의 공학적 파단전누설 해석을 위한 균열열림변위 계산

Crack Opening Displacement Estimation for Engineering Leak-Before-Break Analyses of Pressurized Nuclear Piping

  • 발행 : 2004.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study presents methods to estimate elastic-plastic crack opening displacement (COD) fur circumferential through-wall cracked pipes for the Leak-Before-Break (LBB) analysis of pressurized piping. Proposed methods are based not only on the GE/EPRI approach but also on the reference stress approach. For each approach, two different estimation schemes are given, one for the case when full stress-strain data are available and the other fur the case when only yield and ultimate tensile strengths are available. For the GE/EPRI approach a robust way of determining the Ramberg-Osgood (R-O) parameters is proposed, not only fur the case when detailed information on full stress-strain data is available but also for the case when only yield and ultimate tensile strengths are available. The COD estimates according to the GE/EPRI approach, using the R-O parameters determined from the proposed R-O fitting procedures, generally compare well with the published pipe test data. For the reference stress approach, the COD estimates according to the method based on both full stress-strain data and limited tensile properties are in good agreement with pipe test data. In conclusion, experimental validation given in the present study provides sufficient confidence in the use of the proposed method to practical LBB analyses even though when information on material's tensile properties is limited.

키워드

참고문헌

  1. Wilkowski, G, Ahmad, J., Barnes, C., Broek, D., Kramer, G, Landow, M., Marschall, C., Maxey, W., Nakagaki, M., Scott, P., Papaspyropoulos, V., Pasupathi, V. and Popelar, C., 1985, 'Degraded Piping Program Phase-II,' NUREG/CR-4082, USNRC
  2. Wilkowski, G, Ahmad, J., Brust, F., Ghadiali, N., Krishnaswamy, P., Landow, M., Marschall, C, Scott, P. and Vieth, P., 1991, 'Short Cracks in Piping and Piping Welds,' NUREG/CR-4599, USNRC
  3. Wilkowski, G., Schmidt, R., Scott, P., Olson, R., Marschall, C., Kramer, G and Paul, D., 1997, 'International Piping Integrity Research Group (IPIRG) Program-Program Final Report,' NUREG/CR-6233, USNRC
  4. Hopper, A., Wilkowski, G, Scott, P., Olson, R., Rudland, D., Kilinski, T., Mohan, R., Ghadiali, N. and Paul, D., 1997, 'The Second International Piping Integrity Research Group (IPIRG-2) Program-Final Report,' NUREG/CR-6452, USNRC
  5. Kumar, V. and German, M.D., 1988, 'Elastic-Plastic Fracture Analysis of Through-Wall and Surface Flaws in Cylinders,' EPRI Report, NP-5596
  6. Zahoor, A., 1991, 'Ductile Fracture Handbook,' Novetech Corp.
  7. Ainsworth, R.A., 1984, 'The Assessment of Defects in Structures of Strain Hardening Materials,' Engineering Fracture Mechanics, Vol. 19, pp. 633-642 https://doi.org/10.1016/0013-7944(84)90096-1
  8. R6: Assessment of the Integrity of Structures Containing Defects, Revision 4,' British Energy Generation Ltd., 2001
  9. Kim, Y.J., Huh, N.S. and Kim, Y.J., 2001, 'New Engineering Estimation Method of /-Integral and COD for Circumferential Through-Wall Cracked Pipes,' Transactions of the KSME(A), Vol. 25, No. 3, pp. 548-553
  10. Huh, N.S., Kim, Y.J. and Kim, Y.J., 2001, 'Application of Enhanced Reference Stress Method to Nuclear Piping LBB Analysis: Finite Element Validation,' Transactions of the KSME(A), Vol. 25, No. 4, pp. 741-747
  11. Norris, D.M. and Chexal, B., 1987, 'PICEP: Pipe Crack Evaluation Program,' EPRI NP 3596-SR
  12. Scott, P., Olson, R., Marschall, C, Rudland, D., Francini, R., Wolterman, R., Hopper, A. and Wilkowski, G, 1996, 'Pipe System Experiments with Circumferential Cracks in Straight-Pipe Locations,' NUREG/CR-6389, USNRC
  13. Huh, N.S., Kim, Y.J., Kim, Y.J., Choi, Y.H. and Yang, J.S., 2003, 'On Relevant Ramberg-Osgood Fit to Engineering Non-Linear Fracture Mechanics Analysis,' Transactions of the KSME(A), Vol. 27, No. 9, pp. 1571-1578
  14. Schwalbe, K.H., Zerbst, U., Kim, Y.J., Brocks, W., Cornec, A., Heerens, J. and Amstutz, H., 1998, 'EFAM-ETM 97-The ETM Method for Assessing the Significance of Crack-like Defects in Engineering Structures, Comprising the Versions ETM 97/1 and ETM 97/2,' GKSS Report GKSS 98/E/6
  15. Kim, Y.J., 1998, 'Note on Y/T vs. n for SINTAP Procedure: Continuous and Discontinuous Hardening,' Document generated within Brite-Euram Project 1426-Structural Integrity Assessment Procedures for European Industry-SINTAP
  16. Bannister, A.C., Ruiz Ocejo, J. and Gutierrez-Solana. F., 2000, 'Implications of the Yield Stress/Tensile Stress Ratio to the SINTAP Failure Assessment Diagrams for Homogeneous Materials,' Engineering Fracture Mechanics, Vol. 67, pp. 547-562 https://doi.org/10.1016/S0013-7944(00)00073-4
  17. Kirk, M.T. and Dodds, R.H. Jr., 1993, J and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens,' Journal of Testing and Evaluation, Vol. 21, No. 4, pp. 228-238 https://doi.org/10.1520/JTE11948J
  18. 1997, 'Pipe Fracture Encyclopedia, Vol. 3-Pipe Fracture Test Data,' Battelle
  19. Kishida, K. and Zahoor, A., 1988, 'Crack Opening Area Calculations for Circumferential Through-Wall Pipe Cracks,' EPRI NP-5959-SR