대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제28권10호
  • /
  • Pages.1603-1611
  • /
  • 2004
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

316L 스테인리스강의 상온 반복 거동에 대한 수정 다층 모델의 적용성 검토

Applicability Evaluation of Modified Overlay Model on the Cyclic Behavior of 316L Stainless Steel at Room Temperature

  • 임재용 (한국과학기술원 기계공학과) ;
  • 이순복 (한국과학기술원 기계공학과)
  • 발행 : 2004.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The validity of 'modified overlay model' to describe the cyclic behavior of annealed 316L stainless steel at room temperature was investigated. Material parameters(~f$_{i}$, m$_{i}$b, η, E) fur the model were obtained through constant strain amplitude test. The strain amplitude dependency of elastic limit and cyclic hardening, which were the characteristics of this model, were considered. Eight subelements were used to describe the nonlinearity of the hysteresis loops. The calculated hysteresis curve in each condition (0.5％, 0.7％, 0.9％ train amplitude test) was very close to the experimental one. Two tests, incremental step test and 5-step test, ere performed to check the validity of 'modified overlay model'. The elastic limit was saturated to the one of the highest strain amplitudes of the block in the incremental step test, so it seemed to be Masing material at the stabilized block. Cyclic hardening was successfully described in the increasing sequence of the strain amplitude in 5-step test. But, the slight cyclic softening followed by higher strain amplitude would not be able to simulate by'modified overlay model'. However, the discrepancy induced was very small between the calculated hystereses and the experimental ones. In conclusion,'Modified overlay model'was proved to be appropriate in strain range of 0.35％~ 1.0％..0％.

키워드

참고문헌

  1. Mroz, 1967, 'On the Description of Anisotropic Work Hardening,' Journal of the Mechanics and Physics of Solids, Vol. 15, pp. 163-175 https://doi.org/10.1016/0022-5096(67)90030-0
  2. Dafalias, Y. and Popov, E.P., 1975, 'A Model for Nonlinear Hardening Materials for Complex Loading,' Acta Mechanica, Vol. 21, pp. 173-192 https://doi.org/10.1007/BF01181053
  3. Chaboche, J.L., 1986, 'Time Independent Constitutive Theories for Cyclic Plasticity,' International Journal of Plasticity, Vol. 2, No. 2, pp. 149-188 https://doi.org/10.1016/0749-6419(86)90010-0
  4. Valanis, K.C., 1971, 'A Theory of Viscoplasticity Without a Yield Surface,' Arch. Mech., Vol. 23, pp. 517-534
  5. Ralph I.Stephens, 2001, Metal Fatigue in Engineering, Second Edition, John Wiley & Sons,Inc.
  6. Chiang, D.Y. and Beck, J.L., 1994, 'A New Class of Distributed Element Models for Cyclic Plasticity- I. Theory and Application,' International Journal of Solids and Structures, Vol. 31, No. 4, pp. 469-484 https://doi.org/10.1016/0020-7683(94)90087-6
  7. Chiang, D.Y. and Beck, J.L., 1994, 'A New Class of Distributed Element Models for Cyclic Plasticity- II. On Important Properties of Material Behavior,' International Journal of Solids and Structures, Vol. 31, No. 4, pp. 485-496 https://doi.org/10.1016/0020-7683(94)90088-4
  8. Samson Yoon, Seong-Gu Hong and Soon-Bok Lee, 2003, 'Description of Hysteresis Loops using Modified Overlay Model,' KSME Transaction A., Vol. 27, No. 11, pp. 1856-1863 https://doi.org/10.3795/KSME-A.2003.27.11.1856
  9. Samson Yoon, Seong-Gu Hong, Soon-Bok Lee, 2004, 'Phenomenological Description of Cyclic Deform-ation Using the Overlay Model,' Materials Science and Engineering A, Vol. 364, pp. 17-26 https://doi.org/10.1016/j.msea.2003.09.098
  10. Baudry, G. and Pineau, A., 1977, 'Influence of Strain- Induced Martensitic Transformation on the Low-cycle Fatigue Behavior of a Stainless Steel,' Materials Science and Engineering A, Vol. 28, pp. 229-242 https://doi.org/10.1016/0025-5416(77)90176-8
  11. Th Nebel and Difler, D., 2003,'Cyclic Deformation Behavior of Austenitic Steels at Ambient and Elevated Temperatures,' Sadhana, Vol. 28, Parts 1&2, pp. 187-208 https://doi.org/10.1007/BF02717133
  12. Alain, R., Violan, P., Mendez, J., 1997, 'Low Cycle Fatigue Behavior on Vacuum of a 316L Type Austenitic Stainless Steel Between 20 and $600^{\circ}C$ Part I: Fatigue Resistance and Cyclic Behavior,' Materials Science and Engineering A, Vol. 229, pp. 87-94 https://doi.org/10.1016/S0921-5093(96)10558-X
  13. Mateo, A., Llanes, L., Iturgoyen, L. and Anglada, M., 1996,'Cyclic Stress-Strain Response and Dislocation Substructure Evolution of a Ferrite-Austenite Stainless Steel,' Acta, Materialia, Vol. 44, No. 3, pp. 1143-1153 https://doi.org/10.1016/1359-6454(95)00197-2
  14. Mateo, A. et. al., 2001, 'Cyclic Deformation Behavior of Superduplex Stainless Steels,' Materials Science and Engineering A, Vol. 314, pp. 176-185 https://doi.org/10.1016/S0921-5093(00)01933-X
  15. Degallaix, S., Seddoouki, A., Degallaix, G, Kruml, T. and Polak, J., 1995,'Fatigue Damage in Austenitic-Ferritic Duplex Stainless Steels,' Fatigue and Fracture Engineering Materials and Structures, Vol. 18, No. 1, pp. 65-77 https://doi.org/10.1111/j.1460-2695.1995.tb00142.x
  16. Ellyin, E, 1997, Fatigue Damage, Crack Growth and Life Prediction, Chapman & Hall, 1st Ed
  17. Chaboche, J.L., Dang-Van, K. and Gordier, G, 1979, 'Modelization of the Strain Memory Effect on the Cyclic Gardening of 316 Stainless Steel,' Proc. $5^{th}$ SMiRT, Paper L11/3