DOI QR코드

DOI QR Code

비압축성 재생형 기계에 대한 개선된 운동량 교환 이론 (II) - 손실 모델 및 성능 예측 -

Improved Momentum Exchange Theory for Incompressible Regenerative Turbomachines (II) - Loss Model and Performance Prediction -

  • 박무룡 (한국기계연구원 열유체공정기술연구부) ;
  • 정명균 (한국과학기술원 기계공학과) ;
  • 유일수 (한국과학기술원 대학원 기계공학과)
  • 발행 : 2004.10.01

초록

In momentum exchange theory the loss models for the circulatory flow is critically important. But because of lack of loss model on the circulatory flow, analysis model on regenerative turbomachines is not available in the open literature. In the present study circulatory loss is evaluated by combining bend's losses. Through the comparison with the previous experimental data on linear pressure gradient, a combination factor is suggested in terms of the aspect ratio of a channel. Applying this factor to two kinds of regenerative blowers the predicted results are found to be in good agreement with the experimental data of the overall performance and the head distribution along the rotational direction. Especially, the comparison with the head distribution demonstrates the accuracy of hydraulic model and loss model suggested in the present study. And the comparison with the overall performance confirms the validness of physical models as well as loss models suggested in the present study.

키워드

참고문헌

  1. Wilson, W. A., Santalo, M. A. and Oelrich, J. A., 1955, 'A Theory of the Fluid Dynamic Mechanism of Regenerative Pumps,' Trans. of the ASME, Vol. 77, pp. 1303-1316
  2. Senoo, Y., 1956, 'A Comparisons of Regenerative Pump Theories Supported by New Performance Data,' Trans. of the ASME, Vol. 78, pp. 1091-1102
  3. DeWitt, D. P., 1957, Rational Design and Development of the Regenerative Pump, M.S. Thesis, M.I.T.
  4. Lee, C., Sung, H. J., Kwon, J. H. and Chung, M. K., 1991, 'Study on the Performance Analysis and the Optimization of Regenerative Pump,' Trans. of the KSME(B), Vol. 15, pp. 661-667
  5. Song, J. W., Engeda, A. and Chung, M. K., 2003, 'A Modified Theory for the Flow Mechanism in a Regenerative Flow Pump,' Proc. Instn Mech. Engrs, Vol. 217, pp. 313-321 https://doi.org/10.1243/095765003322066538
  6. Wallace, F. J., Whitfield, A. and Sivalingam, R., 1978, 'A Theoretical Model for the Performance Prediction of Fully Filled Fluid Couplings,' Int. J. Mech. Sci, Vol. 20, pp. 335-347 https://doi.org/10.1016/0020-7403(78)90037-1
  7. Idelchick, I. E., 1993, Handbook of Hydraulic Resistance, Begell House, New York, pp. 357-369