초록
본 논문은 TCP/IP 프로토콜 스택을 위한 RISC 기반 송신 래퍼 프로세서의 설계를 기술하였다. 설계된 프로세서는 이중 뱅크 구조를 갖는 입출력 버퍼, 32 비트 RISC 마이크로프로세서, 온라인 체크섬 계산 기능을 갖는 DMA 모듈, 메모리 모듈로 구성되어 있다. TCP/IP 프로토콜의 다양한 동작모드를 지원하기 위해 기존의 상태 머신 기반의 설계 방식이 아닌 RISC 프로세서에 기반을 둔 하드웨어-소프트웨어 공동설계 설계기법이 사용되었다. 데이터 전달 동작과 체크섬 동작의 순차적인 수행에 기인한 커다란 지변 시간을 제거하기 위해, 데이터 전달 동작과 병렬적으로 체크섬 동작을 수행할 수 있는 DMA 모듈이 채택되었다. 가변 크기의 입출력 버퍼를 제외한 프로세서는 0.35${\mu}m$ CMOS 공정 조건에서 약 23,700개의 게이트로 구성되며, 최대 동작 주파수는 약 167MHz를 가짐을 확인하였다.
In this paper, a design of RISC-based transmission wrapper processor for TCP/IP protocol stack is described. The processor consists of input and output buffer memory with dual bank structure, 32-bit RISC microprocessor core, DMA unit with on-the-fly checksum capability, and memory module. To handle the various modes of TCP/IP protocol, hardware-software codesign approach based on RISC processor is used rather than the conventional state machine design. To eliminate large delay time due to sequential executions of data transfer and checksum operation, DMA module which can execute the checksum operation along with data transfer operation is adopted. The designed processor exclusive of variable-size input/output buffer consists of about 23,700 gates and its maximum operating frequency is about 167MHz under 0.35${\mu}m$ CMOS technology.