Windmilling Characteristics of Centrifugal-Flow Turbojets

  • Yoo, Il-Su (School of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Guseong-Dong) ;
  • Song, Seung Jin (School of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Lim, Jin Shik (Agency for Defense Development)
  • Published : 2004.11.01

Abstract

A new nondimensional method for predicting the windmilling performance of centrifugal -flow turbojet engines in flight has been developed. The method incorporates loss correlations to estimate the performance of major engine components. Given basic engine geometry, flight Mach number, and ambient conditions, this method predicts transient and steady-state windmilling performance. Thus, this method can be used during the preliminary design stage when detailed hardware geometry and component performance data are not yet available. A nondimensional time parameter is newly defined, and using this parameter, the transient performance of different types of turbojets (e.g. centrifugal vs. axial) is compared. In addition, the predictions' sensitivity to loss correlations, slip factors, and inlet ambient temperatures are analyzed.

Keywords

References

  1. Aungier, R. H., 1990, 'Aerodynamic Performance Analysis of Vaned Diffusers,' Fluid Machinery Components, ASME FED, Vol. 101, pp.27-44
  2. Aungier, R. H., 1995, 'Mean Streamline Aerodynamic Performance Analysis of Centrifugal Compressors,' ASME Journal of Turbomachinery, Vol. 117, pp. 360-366 https://doi.org/10.1115/1.2835669
  3. Choi, M. S., Lim, J. S. and Hong, Y. S., 1996, 'A Practical Method for Predicting the Wind-milling Characteristics of Simple Turbo Jet Engines,' ASME TURBO ASIA '96, Indonesia, Paper No. 96-TA-60
  4. Conrad, O., Raif, K. and Wessels, M., 1980, 'The Calculation of Performance Maps for Centrifugal Compressors with Vane-Island Diffusers,' ASME 25th Annual International Gas Turbine Conference and 22th Annual Fluids Engineering Conference, Louisiana, pp. 135-147
  5. Coppage, J. E., Dallenbach, F., Eichenberger, J. P., Hlavak, G. E., Kmoernschild, E. M. and Vanke, N., 1956, 'Study of Supersonic Radial Compressors for Refrigeration and Pressurization Systems,' WADC Report 55-257
  6. Daily, J. W. and Nece, R. E., 1960, 'Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks,' ASME Journal of Basic Engineering, Vol. 82, pp.217-232 https://doi.org/10.1115/1.3662532
  7. Galvas, M. R., 1973, 'FORTRAN Program for Predicting Off-Design Performance of Centrifugal Compressors,' NASA TN D-7487
  8. Jansen, W., 1967, 'A Method for Calculating the Flow in a Centrifugal Impeller When Entropy Gradients Are Present,' Royal Society Conference on Internal Aerodynamics (Turbomachinery), pp. 133-146
  9. Kang, I. S., Choi, M. S., Lim, J. S. and Hong, Y. Y., 1997, 'Analysis of Windmilling Charateristics for Twin-Spool Turbofan Engine,' ASME ASIA '97, Singapore, Paper No. 97-AA-113
  10. Krylov, P. and Spunde, A., 1991, 'About the Influence of the Clearance Between the Working Blades and Housing of a Radial Turbine on Its Exponent,' Izvestiya VUZ. Energetika, No. 7
  11. Rodgers, C., 1978, 'A Diffusion Factor Correlation for Centrifugal Impeller Stalling,' ASME Paper 78-GT-61
  12. Whitfield, A. and Baines, N. C., 1990, Design of Radial Turbomachinery, Longman Scientific and Technical
  13. Whitfield, A. and Wallace, F. J., 1975, 'Performance Prediction for Automotive Turbocharger Compressors,' Proc. Instn Mech. Engrs., Part A, Vol. 189, pp. 557-565 https://doi.org/10.1243/PIME_PROC_1975_189_066_02
  14. Wiesner, F. J., 1967, 'A Review of Slip Factors for Centrifugal Impellers,' ASME Journal of Engineering for Power, Vol. 89, pp. 558-572 https://doi.org/10.1115/1.3616734