References
- Brusa, E., Delprete, C. and Genta, G., 1997. "Torsional Vibration of Crankshafts: Effects of Non-Constant Moments of Inertia," Journal of Sound and Vibration, Vol. 205, No.2, pp. 135-150. https://doi.org/10.1006/jsvi.1997.0964
- Wu, J.-S. and Chen, C.-H., 2001, "Torsional Vibration Analysis of Gear-branched Systems by Finite Element Method," Journal of Sound and Vibration, Vol. 204, No. 1, pp. 159 - 182.
- 이형우, 박노길, 1998, "전달행렬법을 이용한 다단 치차계의 비틀림 진동 해석," 한국소음진동공학회논문집, 제8권, 제3호, pp.504-512.
- 이돈출, 김상환, 유정대, 2003, "고무 탄성커플링을 갖는 선박 추진용 축계 비틀림의 동특성," 한국소음진동공학회 춘계학술대회논문집, pp.742-748.
- 박용남, 송성욱, 김의간, 전효중, 1996. " 점성 댐퍼를 갖는 엔진 축계의 비선형 비틀림강제진동," 한국박용기관학회논문집, 제20권, 제4호, pp.50-58.
- Wakabayashi, K., Honda, Y., Kodama, T. and Shimoyamada, K., 1994, "Torsional Vibration Damping of Diesel Engines with a Rubber Damper Pulley," Transactions of the Japan Society of Mechanical Engineers (C), Vol. 60, No. 572, pp.1167-1174. https://doi.org/10.1299/kikaic.60.1167
- 최은오, 안병민, 홍동표, 1997, "차량주행시 동력전달계의 강제진동 해석," 한국소음진동공학회지, 제7권, 제5호, pp.853-860.
- 김의간, 전효중, 1980, "축차근사법에 의한 박용디젤기관축계 비틀림진동계산의 전산프로그램 개발에 관한 연구," 한국박용기관학회지, 제4권, 제1호, pp.2-22.
- 이강복, 전효중, 남청도, 1985, "모오드해석법에 의한 박용디젤기관 추진축계의 합성 비틀림진동계산에 관한 연구," 한국박용기관학회지, 제9권, 제2호, pp.159-169.
- 박효남, 전효중, 1986, "기계적 임피던스법에 의한 박용디젤기관 추진축계의 합성비틀림진동 계산에 관한 연구," 한국박용기관학회지, 제10권, 제2호, pp.146-155.
- 양보석, 2002, 회전기계의 진동, 인터비젼, 서울, pp.391-555.
- Petyt, M. 1990. Introduction to finite element vibration analysis, Cambridge University Press, Cambridge.
- Moon, D. H. and Choi, M. S., 2003, "Development of Sensitivity Analysis Algorithm for a Straight-Line Beam Structures by the Transfer Stiffness Coefficient Method," JSME International Journal Series C. Vol. 46. No. 1, pp. 138-144. https://doi.org/10.1299/jsmec.46.138
- Moon, D. H. and Choi, M. S., 2000, "Vibration Analysis for Frame Structures Using Transfer of Dynamic Stiffness Coefficient Method," Journal of Sound and Vibration. Vol. 234, No.5, pp. 725-736. https://doi.org/10.1006/jsvi.1999.2970
- Choi, M. S., 2003, "Free Vibration Analysis of Plate Structures Using Finite Element-Transfer Stiffness Coefficient Method." KSME International Journal. Vol. 17, No.6, pp.805-815.