펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지

펄프의 고해 조건이 비에너지 소비와 라이너의 물성에 미치는 영향

Effects of Refining Condition on the Specific Energy Consumption and Physical Properties of Liner

  • 원종명 (강원대학교 산림과학대학 제지공학과)
  • 발행 : 2004.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The effects of refining consistency and plate gap on the specific energy consumption and physical properties of liner were investigated. Higher refining consistency and narrower plate gap brought about the reduction of specific energy consumption to decrease the freeness. Refining consistency and plate gap did not affect the bulk, Taber stiffness and compression index. The reduction of freeness and/or the increase of specific energy consumption caused the decrease of bulk and Taber stiffness, but increased the compression index. The effect of grammage on bulk was not observed, but Taber stiffness and compression index were increased with grammage. The bulk was decreased with the reduction of freeness rapidly at the above 400 mL CSF, and then levelled off. It is expected that the reduction of energy consumption could be obtained from the application of higher refining consistency and narrower plate gap during refining.

키워드

참고문헌

  1. Trans. of the FRS v.1 Advances in beating and refining, Fiber Water Interactions in Papermaking Atack,D.
  2. International Conference, Fundamental Concepts of Refining, IPC A critical review of current theories for the refining of chemical pulps Ebeling,K.
  3. Trans. of the FRS The beating of chemical pulps-the action and the effects Page,D.H.
  4. Paperi ja Puu v.72 no.2 Fundamental aspects of the refining process Hietanen,S.;Ebeling,K.
  5. Trans. of 8th FRS v.1 Mechanical treatment of pulp fibers for paper property development Hartman,R.R.
  6. Proceedings of 3rd International Refining Conference, PIRA v.1 Critical review of refiner theory Baker,C.F.
  7. Das Papier v.20 no.1 On the theoretical classification of the beating process in modem refiners Brecht,W.;Siewert,W.
  8. Tappi v.50 no.8 A method for the comparative evaluation of bar-equipped beating devices Brecht,W.
  9. Southern Pulp Paper Manufacture v.32 no.7 Stock preparation : theory/practice Danfort,D.W.
  10. PTI v.28 no.5 Effect of refining parameters on paper properties Danforth,D.W.
  11. Tappi v.47 no.2 A preliminary study of the refining action on cellulose fibers Van Stiphout J.M.J.
  12. Tappi v.60 no.9 Understanding the disk refiner, 1. The hydraulic behavior Leider,P.J.;Rihs,J.
  13. Tappi v.60 no.10 Understanding the disk refiner- The mechanical treatment of the fibers Leider,P.J.;Nissan,A.H.
  14. Nordic Pulp and Paper Res. J. v.1 no.5 Characterization of pulp refiners by a C-factor Kerekes,R.J.
  15. JPPS v.19 no.3 Applications of the C-factor to characterize pulp refiners Kerekes,R.J.;Clara,M.;Dhami,S.;Marinez,D.M.
  16. TAPPI Papermakers Conference A new approach to the critical factors affecting the refining intensity and refining result in low-consistency refining Lumianen,J.
  17. Proceedings of Third International Refining Conference v.1 Specific surface load theory Lumianen,J.