References
- Ashgriz, N. and Poo, J. Y., 1990, 'Coalescence and Separation in Binary Collision of Liquid Drops,' Journal of Fluid Mechanics, Vol. 221, pp. 183-204 https://doi.org/10.1017/S0022112090003536
- Choi, Y. C., Jung, J. W. and Kim, D. J., 2001, 'Characteristics of Spray from Pressure-Swirl Nozzle with Differnt Liquid Properties and Nozzle Geometries,' Trans. of KSME (B), Vol. 25, No. 12, pp. 1813-1820
- Datta, A. and Som, S. K., 1999, 'Effects of Spray Characteristics on Combustion Performance of a Liquid Fuel Spray in a Gas Turbine Combustor,' International Journal of Energy Research 23, pp. 217-228 https://doi.org/10.1002/(SICI)1099-114X(19990310)23:3<217::AID-ER473>3.0.CO;2-U
- Dodge, L. G. and Biaglow, J. A., 1986, 'Effect of Elevated Temperature and Pressure on Sprays from Simplex Swirl Atomizers,' Journal of Engineering for Gas Turbines and Power, Vol. 108, pp. 209-215 https://doi.org/10.1115/1.3239873
- Jasuja, A. K., 1979, 'Atomization of Crude and Residual Fuel Oils,' Journal of Engineering for Power, Vol. 101, pp. 250-258 https://doi.org/10.1115/1.3446480
- Jazayeri, S. A. and Li, X., 2000, 'Structure of Liquid-Sheet Sprays,' Part. Syst. Charact. 17, pp. 56-65 https://doi.org/10.1002/1521-4117(200006)17:2<56::AID-PPSC56>3.0.CO;2-0
- Kang, S. J., Lee, E. S., Kwon, K. C., Oh, J. H. and Yu, M. J., 2002, 'Twin Spray Characteristics Between Two Impinging F-O-O-F Type Injectors,' KSME International Journal, Vol. 16 No. 5, pp. 732-742
- Kennedy, J. B., 1986, 'High Weber Number SMD Correlation for Pressure Atomizers,' Journal of Engineering for Gas Turbines and Power, Vol. 108, pp. 191-195 https://doi.org/10.1115/1.3239870
- Kim, C. U., Lee, D. Y., Oh, S. M. and Kang, K. Y., 2001, 'Investigation of Icing Phenomenon in Liquid Phase LPG Injection System for Heavy Duty Engine,' Proceedings of ILASS-Asia 2001, pp. 327-331
- Knubben, G. and C. W. M., van der Geld, 2001, 'Drop Size Distribution Evolution after Continuous or Intermittent Injection of Butane or Propane in a Confined Air Flow,' Applie Thermal Engineering 21, pp. 787-811 https://doi.org/10.1016/S1359-4311(00)00082-X
- Koh, K. U. and Lee, S. Y., 2001, 'Characteristics of Swirl Spray in Condensable Environment-Effect of Liquid Injection Temperature,' Proceedings of ILASS-Asia 2001, pp. 316-320
- Koo, J. Y., 2003, 'The Effects of Injector Nozzle Geometry and Operating Pressure Conditions on the Transient Fuel Spray Behavior,' KSME International Journal, Vol. 17, No. 3, pp. 617-625
- Lefebvre, A. H., 1989, Atomization and Sprays, Taylor & Francis
- Simmons, H. C., 1980, 'The Prediction of Sauter Mean Diameter for Gas Turbine Fuel Nozzles of Different Types,' Journal of Engineering for Power, Vol. 102, pp. 646-652 https://doi.org/10.1115/1.3230318
- Simmons, H. C. and Harding, C. F., 1981, 'Some Effects of Using Water as a Test Fluid in Fuel Nozzle Spray Analysis,' Journal of Engineering for Power, Vol. 103, pp. 118-123 https://doi.org/10.1115/1.3230682
- Yule, A. J. and Widger, I. R., 1996, 'Swirl Atomizers Operating at High Water Pressure,' Int. J. Mech. Sci. 38, pp. 981-999 https://doi.org/10.1016/0020-7403(95)00095-X